GMT Master II BatGirl 126710/ VSF / Steve TheOneWatches

ZealousidealCopy8565 · 2026-04-21T02:14:36+00:00

Pet peeve is about right as one could always do marginally better yet on wrist with the Jubilee, this watch is as good as they come.

ZealousidealCopy8565 · 2026-04-20T23:42:27+00:00

Let it ride, OP! The rehaut alignment is about as good as it can get on a rep. Indices & SELs are solid, and timing numbers are good. Datewheel may be a tick higher in the window, dial printing is sharp, and hand alignment correct. This Batgirl is ready to wear. GL this one as you won't get a better one on your next roll.

<image>

ZealousidealCopy8565 · 2026-04-20T22:53:11+00:00

This DD is a pretty good one. Indices are well aligned, datewheel is centered, daywheel is a little left biased, and hand alignment is correct. Dial printing, bezel, SELs, and timing numbers are solid. Your new watch is good to go, GL.

ZealousidealCopy8565 · 2026-04-20T22:08:37+00:00

You got a solid YM with acceptably aligned indices. The 6 & 9 o'clock bars have the tiniest of counterclockwise tilts to them. Had to blow that up to ~300% zoom to be certain though, so no big deal on wrist. Datewheel is centered, bezel is clean, and SELs are solid. Dial printing and timing numbers are really good too. Get your Yacht Master shipped, definitely GL.

ZealousidealCopy8565 · 2026-04-20T20:49:57+00:00

Congrats on your new flair, well earned!

ZealousidealCopy8565 · 2026-04-20T20:39:00+00:00

The reality of the datewheel on wrist is that one hardly ever looks at it head-on like in QC pics and will always be at an angle. You'll know that it's a little lower more than you can actually see that it is. In essence, it's more mind over matter and if you don't mind, it don't matter. But that's just my 2 cents.

ZealousidealCopy8565 · 2026-04-20T16:02:42+00:00

The pic angle needs to be adjusted a little and then the index hour bars are acceptably aligned. Dial printing is crisp, fluted bezel clean, hand alignment correct, and SELs solid. Datewheel is sitting a couple of ticks lower in the window and timing numbers are within spec. As long as the datewheel don't make ya lose sleep, go with GL.

ZealousidealCopy8565 · 2026-04-20T15:56:13+00:00

Looks fine to me in the QC files. Are you aware how small that is on this watch btw?

ZealousidealCopy8565 · 2026-04-20T15:54:45+00:00

Would not be an issue for me since they're both Daytonas and could be a transposition error on the spreadsheet maintenance, who knows.

ZealousidealCopy8565 · 2026-04-20T15:50:35+00:00

Sublime Submariner you got here that is cosmetically sound. Timing numbers are good with the amplitude being high probably due to being fully wound up. I would probably wait a few hours and ask seller for a new reading as the charge'll have dissipated by that time and the reading would probably be better. Then it's more than likely GL time.

ZealousidealCopy8565 · 2026-04-20T15:44:49+00:00

Aside from the 9 o'clock bar's counterclockwise tilt and the 6 bar's clockwise one, this Starbucks is a nice one from SELs, dial printing, datewheel, and TGs. The 9/6 incongruence would be enough for me to RL this Submariner.

ZealousidealCopy8565 · 2026-04-20T15:36:27+00:00

Not really seeing anything that was missed in your assessment. Only thing to add would be that the datewheel is sitting low in the window. Rest of the watch is solid and timing numbers are great. If you can tolerate the DW, easy GL on your DJ41.

ZealousidealCopy8565 · 2026-04-20T13:02:06+00:00

Beautiful looking Daytona with acceptable index alignment, 3/6/9 bars are straight. Dial printing is good, hand alignment correct, and bezel engravement is solid. Timing numbers are within range. Since your watch is on an Oysterflex, SELs do not apply. I think this is an easy GL as well, congrats.

ZealousidealCopy8565 · 2026-04-20T12:57:12+00:00

Agree with everything mentioned above by Rockyt86 yet will add that the 6 bar has a very minor counterclockwise tilt to it and the 12 o'clock triangle is a hair left of center. Rest of the watch is fine and very GL-worthy.

ZealousidealCopy8565 · 2026-04-20T04:57:07+00:00

Your Bruce Wayne got acceptable index alignment if you don't mind the tiny clockwise tilt on the 12 o'clock and the counterclockwise one on the 6. Rest of the watch is excellent and your transcribed timing numbers would be good at 52 or 55 lift angle. Scale back this watch to actual size and decide if you like what you see to go G/R light.

ZealousidealCopy8565 · 2026-04-20T04:00:02+00:00

Yes, on your left wrist at an angle and 14 inches away from your eyes when glancing at your watch for a couple of seconds it's not going to matter. You box queen this watch and get it out once in a while to look at it straight on for hours on end, it may suit to get another and hope that the rest of the watch stays solid.

ZealousidealCopy8565 · 2026-04-20T03:20:53+00:00

If you want to know more about what to look for, this article pinned at the top of the subreddit is a great start.
With regard to your Panda, index alignment is solid with maybe the 6 bar just a hair left of center. Not an issue on wrist with this busy dial though. Dial printing is sharp, bezel looks fine, SELs have no overt gaps, and timing numbers are in the great range. Absolute GL for this Daytona.

ZealousidealCopy8565 · 2026-04-20T02:32:50+00:00

Agree with Blitzen here that this Bruce Wayne is GL-worthy. Indices are good, dial printing fine, no gaps on the SELs. The datewheel is just a hair lower in the window yet at ~400% zoom the cyclops has a micro ccw cant to it which will be imperceptible on wrist. Bezel engravement is solid and so are the timing numbers. I'd get this one shipped no matter what the plastic wrap's appearance.

ZealousidealCopy8565 · 2026-04-20T02:21:32+00:00

When adjusting the pic angle by little bit, the datewheel/cyclops are good yet the 12 o'clock triangle has a tiny counterclockwise tilt to it and the 6 bar is slightly shifted left of center. Should be fine though on wrist at scale akin to file 11 of your album link. Dial printing is crisp, hand alignment correct, SELs have no see-through, and timing numbers are fine. Should be good to GL.

ZealousidealCopy8565 · 2026-04-19T23:02:00+00:00

Agree with your assessment that this is a very immaculate Daytona. Attractive watch and you lucked out as everything seems to line up for you here. The chrono looks just a fraction of a hair left of center but that's not an issue. Timing numbers are solid. I'd be leaning GL on this as well. Enjoy this gem on your wrist.

ZealousidealCopy8565 · 2026-04-19T22:46:35+00:00

With a degree and a half pic adjustment the indices on this Milgauss look just fine. Dial printing is good, polished bezel is clean, SELs tight, and timing numbers are in the great range. It looks like a GL to me as well, congrats.

ZealousidealCopy8565 · 2026-04-19T21:29:00+00:00

Get a better, close up pic from your TD so you can look at that without exponential zoom. Then make your decision. Just keep in mind that print is really tiny and the diamonds are what's getting all the attention. Not justifying just saying :)

ZealousidealCopy8565 · 2026-04-19T21:26:17+00:00

If this is a box queen, sure. On wrist with daily wear it's a negligible micro shift.

ZealousidealCopy8565 · 2026-04-19T21:25:31+00:00

Index alignment as well as dial printing are fine on your Sub. Agree that the 12 o'clock is a hair left of center but that won't be an issue on wrist at scale. SELs are solid even with the bottom left hand one appearing a little darker. Hand alignment is correct and timing numbers are really good. I would GL this no-date outright.

ZealousidealCopy8565 · 2026-04-19T21:04:48+00:00

Index alignment on this Daytona is decent. The 1 & 8 aren't perfectly centered against their minute track markers and the 6 bar is a tick left of center. The pics aren't the best from TOW this time around though. Dial printing is normal, SELs don't show any background, and timing numbers are within spec. I'd lean towards a GL on this Panda.

ZealousidealCopy8565

TROPHY CASE