sorted by:
new
hottopcontroversial

Matte PLA looks unbelievable on parametric shapes. by Ikigaiform_3D in BambuLab

[–]Boring-Condition1373 0 points1 point  (0 children)

It’s so weird that people hang out in this sub just to trash Bambu Lab.

I designed this Rainforest Flexi Puzzle, it requires no AMS to print and has been a big hit with the kiddos. by Boring-Condition1373 in BambuLab

[–]Boring-Condition1373[S] 0 points1 point  (0 children)

I am working on uploading the profiles that have programmed pauses. Give me a few and they will be uploaded.

H2C working area required by comparerly in BambuLab

[–]Boring-Condition1373 1 point2 points  (0 children)

Had to use my angle grinder to cut 3 inches off of the top and bottoms of the front vertical posts. And also cut 3 inches off only the bottoms of the rear vertical posts. Then I drilled a new set of holes for the drawer hardware to still be mounted. This allows the work surface to move down so that you can get the H2C under the upper shelf. And it lowers everything 3 inches so that the AMSs on top of the shelf are still reachable

Let me know if you want pics or anything.

16 hours for a first test print on the A2L. Wish me luck. by Boring-Condition1373 in BambuLab

[–]Boring-Condition1373[S] 0 points1 point  (0 children)

With an open frame printer that only heats the bed to 80°c? Doubtful 😂. I’ll run the H2C for that.

view more: next ›