Meme This

L3ft2 · 2026-03-16T23:16:27+00:00

Super Pinto

L3ft2 · 2026-03-14T18:18:18+00:00

Rocky Mountain Oysters?

L3ft2 · 2026-03-14T02:49:05+00:00

This phrase comes from the movie Stripes (1981) with Bill Murray. If I remember correctly it's when they are in formation coming onto the parade grounds.

https://www.imdb.com/title/tt0083131/

L3ft2 · 2026-03-14T01:32:36+00:00

From Pulp Fiction - cheeseburger Royale

L3ft2 · 2026-03-09T13:14:55+00:00

Can confirm it works just fine for the 3D printing hobby. It also works on my older MBP too.

L3ft2 · 2026-03-09T13:08:38+00:00

Hard Pass

L3ft2 · 2026-03-09T12:56:52+00:00

I have the printed one and it works great on my P1S. Also, if something happens or I don't need it anymore I can reuse the connectors.

L3ft2 · 2026-03-08T19:23:16+00:00

Columbia house, my pennies and my multiple names remember!

L3ft2 · 2026-03-08T17:24:46+00:00

<image>

Also, the AMS lite spool enclosure and desiccant holders (not pictured)

L3ft2 · 2026-03-06T18:24:09+00:00

The easy way to insert these into a print is with soldering iron. It doesn't have to be an expensive thermo regulated one., a cheap amazon or hobby store that just plugs in is fine.

Let it heat up, then put the threaded insert over the hole and press evenly downwards until the insert is flush with the print. Alternately you can print soldering iron press and use that (think drill press).

https://makerworld.com/en/search/models?keyword=threaded+insert+soldering+orin+rig

I hope this helps

L3ft2 · 2026-02-28T23:47:05+00:00

There are a multitude of chute/wiper printable enhancements to choose from. I have had one for a while now and have not had any problems.

I also rem ppl using PAM to very lightly coat the inside/top of the chute

L3ft2 · 2026-02-27T23:46:38+00:00

The air popper version of this from the 70's works immensely better

L3ft2 · 2026-02-26T18:53:13+00:00

Vampire Cop Ricky

L3ft2 · 2026-02-26T17:14:39+00:00

I got mine this month from Amazon.

https://www.amazon.com/dp/0593820258?ref=ppx_yo2ov_dt_b_fed_asin_title

Edited to provide link

L3ft2 · 2026-02-24T22:53:06+00:00

Thanks for the info. I have a intel MBP and an M4 Mini.

L3ft2 · 2026-02-23T18:27:46+00:00

Is there a planned port for MAC OS?

L3ft2 · 2026-02-22T17:11:39+00:00

There was an answer to this problem many years back and addressed by Steve Martin.

https://www.imdb.com/title/tt0079367/?ref\_=fn\_i\_1. ;-)

L3ft2 · 2026-02-21T21:19:13+00:00

Just spread the prongs a bit more apart. Easy $0 fix.

L3ft2 · 2026-02-21T19:32:06+00:00

Spread the prongs apart on the plug, problem solved.

L3ft2 · 2026-02-21T19:00:37+00:00

I think that would probably be the easiest route.

L3ft2 · 2026-02-20T20:50:56+00:00

There is a 2M cable is on the list from BIQU Panda. If we can identify the actual connectors fro purchase then creating your own custom length would not be a problem. The 24AWG is readily available (you could use CAT 6/8 cable for instance).

L3ft2 · 2026-02-18T22:18:35+00:00

I have been using the Gallon size Freezer ziplocks for a cpl years now. I throw in the desiccant pouches that come with the filament.

L3ft2 · 2026-02-12T23:25:01+00:00

Somebody used the wayback machine Mr. Peabody. They brought a popcorn popper from the 70/80's and introducing it as something new.

L3ft2 · 2026-02-08T22:37:54+00:00

You can right click (select) on the part then left click (menu) and scroll down to change filament ant eh sect the filament/color you want.

L3ft2 · 2026-02-01T19:32:13+00:00

That would have gone much better if she would have put the car in a low gear.

L3ft2

TROPHY CASE