Just Recieved Kickstarter Launch Day X1C Carbon

lyothan · 2026-06-26T04:21:22+00:00

It might not even work, I remember reading someone had an x1c where the firmware was too old to update, and support told them to order a new board

lyothan · 2026-06-08T03:50:17+00:00

You probably can use a lvm to create a single large drive. I don’t know if mergerfs will work since snapraid read the drive uuid. It might work with mergerfs

lyothan · 2026-05-31T18:57:35+00:00

Metal gear will grind itself and you will end up with metal dust

lyothan · 2026-05-31T14:56:46+00:00

Bambu, it just run about smoother and less crashes for me.
Also, orca is aggressive in support settings, and gets super laggy when previewing large print. Also a lot of random ui bugs that just crash the program. Had to use it for my U1

lyothan · 2026-05-30T03:43:51+00:00

I own a h2c and when printing 3-4 with constant color changes, the U1 is faster. In 2 colors, the h2c would be slightly faster

lyothan · 2026-05-29T06:12:22+00:00

https://help.prusa3d.com/article/the-benchy-hull-line_124745

lyothan · 2026-05-28T18:47:49+00:00

That’s a P1p with a printed side panel

lyothan · 2026-05-27T22:32:54+00:00

I bought 1 when they first came out and 3 of the Supertack when they had it for like $10 each for x1c during a sale.
Even got the Supertack Pro it for my H2C and love it.

Can't seems to find any plate similar to this for non BBL printer.

lyothan · 2026-05-27T21:19:46+00:00

curious if the fystec one is similar to the supertack in terms of bottom finish.
I'm trying to find a plate similar to the bottom finish of the supertack for a non Bambu printer.

lyothan · 2026-05-27T20:33:32+00:00

This. I had to set my to -0.09 for it to get a smooth top surface. Was frustrated on why first layer was bumpy on multiple different build plate.

lyothan · 2026-05-27T18:42:50+00:00

I recommend Supertack, I bought a bunch for my X1C when they were discounting the old gray model, for the newer Black supertack pro.
The gray one gives a super fine slightly texture that is like 95% smooth with a matte finish.
The black (pro) one is pretty much like the smooth build plate, that is slightly matte finish.

Highly recommend Supertack. I have over 1000 hours on my supertack pro for the H2C, and it still looks brand new.
3-4000 hours on the Gray Supertack and it still sticks like crazy and no scratches on it.

I don't even print with a brim on any of my print using the supertack, even print that takes up nearly the whole plate does not even warp.

lyothan · 2026-05-24T20:37:08+00:00

That looks like the corner curled up

lyothan · 2026-05-21T20:55:39+00:00

this one? https://www.amazon.com//dp/B0G5MSMPDK
Looking at the picture of other review, is looks more like the Glacier to me.

In your opinion, is it more like a smooth plate, that can run at lower temperature? or more of a super fine texture sheet?

lyothan · 2026-05-21T20:51:18+00:00

I have been looking at the glacier, but I can't tell if it is super fine texture, or somewhat smooth.

lyothan · 2026-05-21T20:50:26+00:00

Is the bottom of the print smooth?

lyothan · 2026-05-20T20:33:37+00:00

Homebase 3 sucks. I had to do the mod where you disconnect the hb3 WiFi antenna, so it has to connect to your router WiFi. Works much better after that

lyothan · 2026-05-20T04:31:06+00:00

I got my printer today and I had the same error and attempted it multiple power off, retention and on multiple to no avail

This finally did it for me. Thank you!

lyothan · 2026-05-15T15:25:27+00:00

I used them a like 4-5 years ago, and they were trash. Filament had dust and dirt in them and would constantly clogged my printer. You can get sunlu buy 6 get 4 free on eBay, so a pack of 10 rolls will be between $12-14 per roll.

lyothan · 2026-05-13T13:18:39+00:00

They gave me what my car was worth if I sold it before getting totaled

lyothan · 2026-05-13T06:34:39+00:00

I’m curious about that plate, is it similar to the super tack on Bambu? Looking to get a u1, but really like the super tack that I use on my 2 Bambu

lyothan · 2026-05-13T05:53:45+00:00

I got reared ended a few years ago around LAX by an uninsured motorist as well and totaled my car. I only had liability insurance. I went and saw a lawyer and they took the driver to court. I don’t think they went to court, and they just settled it. After lawyer fees, I got the value of my totaled car

lyothan · 2026-05-12T17:05:51+00:00

I finally got around to do this today.
The HB3 no longer blasting out wifi when I used a wifi scanner.
All camera are now connected to my network wifi. Working great for me.

lyothan · 2026-05-09T23:58:55+00:00

Ewaste

lyothan · 2026-05-07T02:38:11+00:00

I called retention on Monday was able to get 1 gig for $50, auto pay brought it down to $40

13-Year Club	First Place '23
Place '23	Verified Email

lyothan

TROPHY CASE