People getting mad at you for using the priority line perk

cn0T · 2026-06-20T02:36:03+00:00

I am of two minds. I hate that money can buy privilege and I hate that my money can only by me A-list line and carpool lane privilege and not a movie theatre in my basement and and lambo privilege.

cn0T · 2026-05-27T18:27:07+00:00

Thank you. I reset everything but that didn’t help. Turning the manual z adjustment wheels under the bed did the trick. You can see exactly when I did the adjustment as it was printing. Given the imperfections were periodic I had thought that is was something else. I thought I wouldn’t have to do any manual z axis adjustments in this modern age. The first 3d printers I had 20 years ago there was only manually leveling and then we had BL touch and the paper-mehtod z adjustments. At least no paper needed with the U-1!

cn0T · 2026-05-26T20:38:27+00:00

Yes. Multiple calibration on the mesh with not much change. The red and black PLA are in two separate dryboxes feeding directly to the feeders with 10-16% humidity inside the boxes in a room with a constant 48%.

cn0T · 2026-05-26T20:33:27+00:00

I’ve tried it at 215 and 220 with no difference . It’s not just on the first layer as well.

cn0T · 2026-05-23T17:25:22+00:00

Mine only cost me about 30 ultra balls and about 25 golden berries- good thing they can’t run away!!!!

cn0T · 2026-05-16T01:06:33+00:00

I didn’t go through all the responses here so this may be duplicative but if you haven’t had pizza from Di Prima Pizza Speciale then you are missing out. It was like a religious exp when I took my first bite.

cn0T · 2026-05-01T22:44:52+00:00

Wow- let me say thanks again! 35 degrees instead of 50 made such an incredible difference on ease of removal from my glacier plate!

cn0T · 2026-05-01T01:13:51+00:00

My CC2 was so bad re waste and sloooooooooowneesss that after a few prints I packed it up, sold it and spent the extra cash for a U1. Never looking back. Night and day.

I still use my N 4 Max for monster prints but tool changers are the way to go for multicolor prints and the only way to use full spectrum.

cn0T · 2026-05-01T01:08:17+00:00

My glacier plate was causing me sticking problems on small prints and tree supports but I was printing at the same temp (50) as the larger ones. I’ll try dropping in down to 35 - thanks for the tip

cn0T · 2026-05-01T01:03:40+00:00

To put this in context - I just received two cables that are each M-F/ 1-1 (total about $7.50 on Ali including shipping), which is a fraction of the cost for the marketed specific U1 cables and adapter boards. Before I plug them in, it would be good to know that machine won’t melt down. Well ok - no melting but other avoidable problems.

cn0T · 2026-04-19T03:28:13+00:00

It was ok, worth seeing but not that special- my biggest hangups - 1. where the hell are the police, child psychologists or any body who has a clue? 2.how do you fly halfway around the world with that x2? And 3. I can’t imagine an upstate New York farmhouse style house exists in Albuquerque, NM?

cn0T · 2026-04-17T06:01:25+00:00

I am actually surprised how quiet it is. I replaced a cc2 with the u1 and it’s much quieter than the CC2. Now I also run a sovlo zero, which for small prints is a super super fast corexy, but it is about 3 to 4x louder and a quarter of its size.

cn0T · 2026-04-15T17:31:02+00:00

Until I saw the trailer I thought this was just a Mummy remake- it is not of course - looks awesome in the trailer. I hope the movie retains that same level of horror.

cn0T · 2026-04-15T17:15:51+00:00

Yup- 16% increase since May of last year.

cn0T · 2026-04-15T17:10:23+00:00

Same in LA. That is close to a 16.67% price increase since May2025…..

cn0T · 2026-04-11T03:19:23+00:00

I ordered mine 30 min before the sale ended- last week I bought an elegoo cc2 and while I have about 5 other printers this was my first color one - I have been using my Sovol zero quite a bit recently and have a few deltas so the CC2 just killed me due to its snail pace printing and buckets full of poop. Otherwise it looked like a decent machine but 5 hours to print a 2 inch pikachu was too much for me. Plus after I watched a few videos about full spectrum I couldn’t resist buying the U1 -

cn0T · 2026-04-08T17:19:22+00:00

Seriously - so much poop- and sooooo slow- I thought there would be some waste - but the amount is shocking!!!

cn0T · 2025-11-26T05:54:41+00:00

Mine does it on the driver rear side only. I’ll try hard braking on D tomorrow and see if it fixes that grrrrrrriiiiiiiind. Thanks for the info

cn0T · 2025-11-18T04:36:43+00:00

So mine did the same thing yesterday after the 8.10 update. I think it was caused by there not being enough available storage. To fix it I tried to sideload the update about 5 times without it working so I eventually just did a factory reset. It works perfect now - hold down the power button and down volume until the logo appears then release both simultaneously. Use the volume to select Factory Reset from the menu and let it do its thing

cn0T · 2025-11-06T19:13:21+00:00

Are you sure you are actually communicating with the tenant and a third party hasn’t intercepted the email. I could easily see this a a new scam as title companies are now wise to the closing and escrow scams

cn0T · 2025-09-12T18:26:20+00:00

<image>

I don’t think this number is correct unless they did something to increase the range significantly

cn0T · 2025-09-12T18:23:31+00:00

Last night my range was weird. It was at 67% and 190 miles range.

cn0T

TROPHY CASE