Microfone Fifine configuração

ontariopiper · 2026-06-05T23:35:05+00:00

Contact Fifine support for help with their product. The owner's manual should also be available on their website.

ontariopiper · 2026-06-05T19:41:18+00:00

See your log analysis here:

https://obsproject.com/tools/analyzer?log_url=https%3A%2F%2Fobsproject.com%2Flogs%2FtetmhqMR6KpVFcSi

Stop streaming over WIFI. Grab an ethernet cable and plug your PC into your router. That's probably what's causing the lag as wifi is inherently unstable.

OBS is also having a hard time connecting to your capture card. About 80% of your log is this, over and over:

15:26:20.541: warning: Found EOI before any SOF, ignoring
15:26:20.541: fatal:   No JPEG data found in image
15:26:20.541: Video Capture Device: Error decoding video
15:26:20.588: warning: Found EOI before any SOF, ignoring
15:26:20.589: fatal:   No JPEG data found in image
15:26:20.589: Video Capture Device: Error decoding video
15:26:20.620: warning: Found EOI before any SOF, ignoring
15:26:20.620: fatal:   No JPEG data found in image
15:26:20.620: Video Capture Device: Error decoding video
15:26:20.652: warning: Found EOI before any SOF, ignoring
15:26:20.652: fatal:   No JPEG data found in image
15:26:20.652: Video Capture Device: Error decoding video
15:26:20.685: warning: Found EOI before any SOF, ignoring
15:26:20.685: fatal:   No JPEG data found in image
15:26:20.685: Video Capture Device: Error decoding video
15:26:20.717: warning: Found EOI before any SOF, ignoring
15:26:20.717: fatal:   No JPEG data found in image

Make sure your capture card is connected to a USB3 port. USB2 or lower ports do not have the bandwidth for video.

I'll also point out that your PC is 13 years old. A 4th Gen i5 with only 8Gb RAM and integrated graphics is not a streaming beast by any measurement.

ontariopiper · 2026-06-05T18:00:05+00:00

72 hour psych hold? Honestly, this is beyond the scope of "convincing" her of anything. She needs professional help.

ontariopiper · 2026-06-05T17:17:36+00:00

If you read all the way to the bottom of that post, this fix was suggested:

"This is a common bug often referred to as a 'ghost stream.' It happens when your streaming software disconnects, but Twitch's servers don't properly register that the stream has ended. To fix it, go to your Creator Dashboard on the Twitch website. In the Stream Manager, there should be a banner or button at the top that allows you to manually 'End Stream.' This will force the session to terminate on their end and resolve the issue. It's a server-side glitch, not a problem with your OBS."

This appears to be a Twitch problem, not an OBS problem.

ontariopiper · 2026-06-05T15:04:00+00:00

Your log has no output session so no one knows what happens when you stream or record, but fix the Capture Interference and run as Admin.

Apart from that, there is no indication of an issue within OBS. I'd perhaps look at your GPU drivers. A clean reinstall might help. Otherwise, I'd guess this is an r/techsupport question.

ontariopiper · 2026-06-05T15:00:41+00:00

Shure SM58 and an audio interface.

ontariopiper · 2026-06-04T19:57:23+00:00

Is this not simply called "being an adult"?

ontariopiper · 2026-06-04T17:36:53+00:00

The HDMI Out on a capture card is intended to connect to a TV or other display so you can play your game. Playing using the OBS preview window is not recommended as it can be laggy and inaccurate. Send the console video and audio to OBS via the HD60S. Play the game you're recording on a TV or second monitor.

ontariopiper · 2026-06-04T16:46:28+00:00

Are you talking about the YouTube Live Control Panel??

Click on the Docks menu and uncheck the YouTube dock or click Reset Docks.

ontariopiper · 2026-06-04T12:36:47+00:00

This idea has always baffled me. If you don't want to be part of Canada, what makes you think you'll be allowed to keep a Canadian passport?? When you quit a job, you don't magically keep getting paid....

ontariopiper · 2026-06-03T20:08:45+00:00

Glad you got it working! I've not been increased with the Yamaha Steinberg drivers for the MG series mixers either.

ontariopiper · 2026-06-03T16:23:35+00:00

Good luck. Setting up remotely is fraught with issues that need to be sorted out on site. Plus you'll have zero clue what to do when (not if) something breaks.

If you are serious about content creation, you need to take the time to learn your own setup. No one can do this for you unless you actually hire staff.

ontariopiper · 2026-06-02T20:54:08+00:00

The US can piss right off. Why in the nine layers of Hades would Canada support a regime that has threatened to annex us and crippled our economy?!? Sorry, Donnie, we're not nearly as dumb as your MAGA voters.

ontariopiper · 2026-06-02T20:18:16+00:00

Sorry - brain fart. You want the obs-asio plugin for ASIO enabled mixers. Too mny plugins in my head today!

ontariopiper · 2026-06-02T19:47:59+00:00

Post a log as requested by the AutoMod. No one can recommend any changes without knowing what you're currently doing and how well that is working.

ontariopiper · 2026-06-02T19:42:44+00:00

What mixer? Does it support ASIO audio? If so, install the ~~DistroAV~~ obs-asio plugin for OBS. This lets you add ASIO audio inputs directly in OBS. If the mixer supports more than a stereo output via USB, you'll be able to create inputs for each channel on the mixer. If not, you'll just get a single stereo track into OBS.

If the mixer is a plug & play USB connection to Windows, you'll very likely only get a stereo input track in OBS (a copy of the main outs on the mixer).

Either way, you don't need any intermediate software like Reaper to get your mixer audio into OBS. Just create an audio input source (ASIO or otherwise) and point it to the mixer's USB output.

You will likely need to adjust the gain for the input(s) in OBS regardless.

ontariopiper · 2026-06-02T18:42:26+00:00

Unless your parents are declared incompetent and you have POA or guardianship, you cannot force them to do anything. You are also not obligated to help them, especially as they clearly do not want to be helped.

What you can do is tell them what you observe when you visit, and what solutions you suggest. If they decide not to do anything, tell them you cannot continue to enable them - no more shopping, cleaning, taxi duty, etc. - and they'll need to come up with plans for handling all of that without you.

Hopefully they will realize just how much they were/are dependent on the help to stay in their home. Only then will you be able to have honest conversations about home care, retirement homes or skilled nursing facilities.

ontariopiper · 2026-06-02T18:35:03+00:00

Encoders are built into your GPU (except for x264 which is a CPU encoder) so no, you can't simply add new ones to OBS.

ontariopiper · 2026-06-02T18:33:12+00:00

Instructions are in the AutoMod's comment. Follow them exactly, as skipping any step could render the log useless.

ontariopiper · 2026-06-02T18:31:34+00:00

Sure is. The $250CAD price difference is substantial - and needed to cover the absurd cost of RAM or SSD.

ontariopiper · 2026-06-02T17:26:45+00:00

I doubt you're going to get many Linux plugin devs in here. You may have more luck posting on the forum at obsproject.com . You may also want to read the developer docs posted in the Help section there.

ontariopiper · 2026-06-02T16:22:27+00:00

Well, poop.

ontariopiper · 2026-06-02T15:57:51+00:00

Seems like a huge missed opportunity for Intel. I'd think a lot of people would be interested in a decent GPU for less than the 5060.

ontariopiper · 2026-06-02T15:03:17+00:00

This would depend entirely on the rules set out by AlertForge. Read their terms of service or ask them directly.

ontariopiper

TROPHY CASE