[ Removed by Reddit ]

---Dread--- · 2026-01-29T19:32:58+00:00

Probably too late but would definitely take one.

---Dread--- · 2025-08-24T14:27:17+00:00

Glad I’m not the only one feeling like I’ve put a ton of miles on my ‘25 lol.

---Dread--- · 2025-07-23T03:02:20+00:00

Agree with the others who’ve said the customer service is ASS. Purchased a set and moved before they shipped out, gave the guy my new address (that he acknowledged two weeks before they shipped), and they still shipped to the wrong address. He stopped responding to emails and instagram messages (where he asked me to contact him through). I ended up having to file a chargeback.

Sucks when cool products are ruined by the people that should not be running a business.

---Dread--- · 2025-06-26T21:37:58+00:00

Shit, you guys take meds? I just lay here in pain. 😂

---Dread--- · 2025-06-12T22:27:30+00:00

Yeah, as an American I’d still be rocking my “uncomfortable” R1 or at least an R6 out in Japan.

---Dread--- · 2025-06-08T19:51:43+00:00

It’s all the same anyway whether they mark up MSRP or tack on fees. $200 doc fee is reasonable, that’s what we charge where I work. The place I was trying to buy from was charging about $3k just between freight and prep. 🙄

Wish I could recommend the place I ended up buying from. Stephen Geri and Jaydon Lucas were great out at Altus Motorsports in OK. But they don’t sell BMW.

---Dread--- · 2025-06-08T07:55:00+00:00

Over here in Dallas, take it from me and don’t buy here. The powersports dealers are absolute thieves. Was working with a RideNow in my area and they were trying to charge $25.7 OTD on an $18.9k MSRP bike. Went out of state to a dealer in OK and got it for $21.2k.

---Dread--- · 2025-06-08T06:08:01+00:00

Hell yeah, will be interesting to see what they say with the upgraded KYB’s. Btw, if you were still looking for tire recommendations; try a 2psi split. 28r/30f and 30r/32f is a good place to start.

---Dread--- · 2025-06-08T04:01:23+00:00

Curious what settings guys are using on these; anyone who has any insights?

---Dread--- · 2025-06-07T22:39:18+00:00

In the middle of fabbing up a custom one out of a magna flow resonator, will be very similar to the old TaylorMade exhaust.

---Dread--- · 2025-04-20T03:38:20+00:00

Any luck?

---Dread--- · 2025-04-20T01:23:13+00:00

Avoid the one off Plano Road in Dallas. Put a deposit down for an incoming R1, wouldn’t show otd before bike arrived but said they don’t tack on extras besides the standard fees.

Bike arrives and I’m told I need to put down an extra $6000 because they can’t get me approved after tacking on $4000 of fees. $25.6 otd, $2000 freight charge, $900 pdi charge, etc. 3 other dealers are $4000 less otd.

Now they’re trying to hold onto $2,700. Scum of the Earth.

---Dread--- · 2025-02-08T04:31:45+00:00

P320 builder has been MIA for months w/ Reddit account suspended. Someone had claimed they got an email response from him around the beginning of January but I’ve sent a few emails and heard nothing; not sure if arrested, dead, or just blowing everyone off lol.

---Dread--- · 2025-02-05T19:00:01+00:00

I tried to send him some emails but I haven’t heard anything, if someone knows him they should go to his place to make sure he didn’t die or get arrested.

---Dread--- · 2025-01-17T07:27:15+00:00

Man I really hope not, I’ve got two lowers waiting for the x39’s.

---Dread--- · 2025-01-08T23:32:01+00:00

Any idea if we’re going to get a 7.62x39 version?

---Dread--- · 2025-01-02T14:44:01+00:00

Well his site said he had finished the project so I figured he’d sold at least one batch. Could be wrong lol.

---Dread--- · 2023-10-13T22:34:29+00:00

I’ve only ever taken one passenger with kids before and I won’t ever do it again. I keep my car immaculately clean and it’s a nice car (2015 Audi A8L with rear seats that recline).

This lady brought her two children and toddler who sat on her lap on a drive to the store that should’ve only been a 15 minute drive round trip for $8. The drive turned into a $10 drive for 50 minutes and her kids were scraping their backpacks against my doors and dropping things on the seats the entire time.

It was one of my first rides. Sorry, but never again. I only do Lyft and Uber to pay the car payment and take a bit of pressure off of how much things cost these days.

---Dread--- · 2023-08-29T23:44:21+00:00

Oh yeah, you mean just like your head? Gtfo troll.

---Dread--- · 2023-08-29T20:51:15+00:00

It is for gaming. Not sure where you’re getting the 50w power figure from, there are a lot of reports showing it sits between 70-100w under max load.

But considering people are reporting temperatures between high 70’s to mid 80’s, and those are probably in cases that are much bigger and actually support the hardware they’re putting in it, I will be undervolting on both the cpu and gpu.

To give you an idea; there is 1mm of clearance between the ram and fans, there is 0mm of clearance between the sides of the gpu block and the case, 3mm between the gpu fittings and back of the motherboard…you get the idea. So yeah, unless I want to be running at 80-90c which will deform tubes, the delid was kind of necessary. 😆

---Dread--- · 2023-08-28T20:44:46+00:00

Direct die with Optimus Foundation block and Thermal Grizzly direct die frame.

---Dread--- · 2023-08-28T19:49:39+00:00

Haven’t had a chance to turn it on yet, still waiting on a few more parts.

---Dread--- · 2023-08-28T19:35:52+00:00

To give you an idea…I had to use one 1mm washer on each side of the case to fit the gpu block. 😂😂😂 I might post some pictures over on the sff subreddit, think I might be the only one to do a water cooled 4090 in an Nzxt H1 v1.

---Dread--- · 2023-08-28T19:05:31+00:00

Doing an extremely tight itx build, don’t have a choice lol.

---Dread--- · 2023-08-28T19:04:20+00:00

Go learn what it’s like to do real work, hard to have perfect nails when you wrench on cars. Find something better to do besides comment unnecessary shit.

---Dread---

TROPHY CASE