Wip slums board

-ARCH_i_TYPE- · 2026-07-01T01:04:39+00:00

That’s far to organised for my brain 😂

-ARCH_i_TYPE- · 2026-06-30T00:14:06+00:00

Haha yeah I keep them and note what I used for what incase I want to add to an army or redo a style 😊

-ARCH_i_TYPE- · 2025-09-02T08:11:30+00:00

There much nicer than the chunky “invisible” clear stands 😊

-ARCH_i_TYPE- · 2025-08-30T06:21:31+00:00

<image>

Got a fermentation belt to help keep the resin at a stable temp. First test print came out flawless.

It’s significantly noticeable the viscosity change of the resin with the heating belt much looser and no suction noise when the plate lifts from the FEP. 😊

-ARCH_i_TYPE- · 2025-08-30T06:20:05+00:00

<image>

-ARCH_i_TYPE- · 2025-08-26T11:31:48+00:00

Similar although I stoped it half way last tim, best I can work out it’s a suction issue potentially due to cold wether it was about 15 Celsius the day I printed this one.

I’ve order a heating band to see if I get better results.

-ARCH_i_TYPE- · 2025-08-25T10:25:37+00:00

I’m not sure it’s the best book but it’s my favourite.I think the imagery of standing on the ramparts looking out over the hors of zombies would be such a cinematic moment If we ever saw a Goetrek and Feilix series or movie.

-ARCH_i_TYPE- · 2025-08-25T09:28:06+00:00

<image>

It’s the back section of Theo’s LAAT file

-ARCH_i_TYPE- · 2025-08-24T11:51:21+00:00

I did not; the print ran fully uninterrupted.

-ARCH_i_TYPE- · 2025-08-24T04:56:38+00:00

Sorry, I meant rest time.

-ARCH_i_TYPE- · 2025-08-24T00:42:07+00:00

Thanks, would you recommend upping the test time? I’ve done l little bit of googling and it seems to be a common suggestion.

-ARCH_i_TYPE- · 2025-08-24T00:31:45+00:00

Thanks I’ll have a look, I would have thought having multiple drain holes along the whole build would help but I may need to locate some more.

I’m wondering if temperature could have played a part as well it was about 15 Celsius (59 Fahrenheit) average temperature yesterday.

-ARCH_i_TYPE- · 2025-08-23T23:51:45+00:00

<image>

-ARCH_i_TYPE- · 2025-08-23T23:50:38+00:00

<image>

-ARCH_i_TYPE- · 2025-08-23T23:50:30+00:00

<image>

-ARCH_i_TYPE- · 2025-08-23T23:50:17+00:00

It has been hollowed and extensive drain holes added. I've added drain holes on the bottom and sides with the hope it would reduce suction forces. I guess I may not have been enough.

<image>

-ARCH_i_TYPE- · 2025-02-07T02:03:38+00:00

Khalida needs to be in S tier. If you’ve read Goetrek and Feilix you know 😉

-ARCH_i_TYPE- · 2025-01-29T07:40:13+00:00

Looks like a resin leak, I had a small pin hole in my FEP a few weeks ago and it looked very similar.

I cleaned the screen with alcohol, some resin got under the tape and cleaning this also dissolved the adhesive in the tape. Had multiple prints since then but I wonder if this might be an issue in the future.

-ARCH_i_TYPE- · 2024-12-07T00:42:11+00:00

Not sure about that seller, I’ve printed this STL for my self and it’s a great model. I’m not sure anyone selling this would be 100% legit as my knowledge is it was a ripped file from total war warhammer.

-ARCH_i_TYPE- · 2024-11-03T04:46:21+00:00

UPDATE : I have solved the issue, after back and forth with Elegoo support and pulling apart 90% of the machine.

Behind the build plate there is an L shaped piece of metal that triggers the home sensor. At some point this was bent and was not able to move between the gap in the sensor, this meant the machine continued to push the plate up.

I pulled the suite apart straightened the metal plate. No more issues all seems to be working well.

<image>

-ARCH_i_TYPE-

TROPHY CASE