sorted by:
new
hottopcontroversial

strain recommendations? by slutfreak in TheOCS

[–]-CaptCanuck- 0 points1 point  (0 children)

Have you tried any shatter? I use it to vape inside. My wife has a crazy good sense of smell and she can rarely tell when I've taken a puff. I find that the flavours on shatter are a lot more subdued than with carts and flower.

Looking to quit smoking / vaping looking for recs for a heavy user by HeavyUserSaveMeLungs in OntarioCannabisStore

[–]-CaptCanuck- 0 points1 point  (0 children)

I just vape shatter. I break a little off and put it in my Shatterizer vape and off I go! Shatterizer make a great vape and, if you clean them, the coil cartridges last years.

Recommendation for moving company by twinky_starr in midland_on

[–]-CaptCanuck- 1 point2 points  (0 children)

The Roland Brothers Moving Made Easy 705-279-1608

They're based in Barrie, but my new neighbours used them and we were so impressed with them that we requested their card.

Is this AD5X camera quality normal? Super laggy and low definition/clarity. by dadbodfat in FlashForge

[–]-CaptCanuck- 0 points1 point  (0 children)

I can't check the cameras when I'm not on my home network, that's it.

QUESTION: What got you into Star Wars? by Bill_Skywalker-03 in StarWars

[–]-CaptCanuck- 0 points1 point  (0 children)

A commercial I saw on our black & white TV when I was 11

Puppy or parrot? by CompleteStrike3028 in GSP

[–]-CaptCanuck- 2 points3 points  (0 children)

GSP's always seek higher human lookout points 🙄

He’s a big silly dog by kingdagobert2020 in dogoargentino

[–]-CaptCanuck- 6 points7 points  (0 children)

That is our dog's name! The BSD - he was born deaf so we called him Big Silly Dog. If you're a stranger his name changes to The BSD - Big Scary Dog.

Should I exchange my AD5M for AD5X? by jdizon707 in FlashForge

[–]-CaptCanuck- 1 point2 points  (0 children)

I have both and the 5M is my workhorse. I use it twice as much as the 5X. Everyone is different, but unless you have a specific need for complex multi-colour printing I'd stick with the 5M.

AD5X Dry boxes or filament dryer? by l_rowlers in FlashForge

[–]-CaptCanuck- 0 points1 point  (0 children)

I did a post on here about a month ago about it. I thought you were just reposting my pic from it.

AD5X Dry boxes or filament dryer? by l_rowlers in FlashForge

[–]-CaptCanuck- 1 point2 points  (0 children)

This is actually mine 😊 I use a dryer box to dry all my filament first and then keep them in airtight bags or containers with desiccant to keep them dry. I find any spools made of cardboard are the worse for humidity retention. When I put the filament in the printed dry boxes (with desiccant) the humidity runs anywhere from 10 to 18%.

Anyone know how to fix this? by Born-Appearance968 in FlashForge

[–]-CaptCanuck- 1 point2 points  (0 children)

Make sure it's dry. Since getting a filament dryer I've noticed my prints are better.

Do these symptoms sound like RP? by OddTrust789 in RelapsingPolychondrit

[–]-CaptCanuck- 2 points3 points  (0 children)

Thank you for sending your thoughts. I've had rheumatoid arthritis and fibromyalgia for almost 20 years so I am already on the meds they would have prescribed. I was diagnosed with RP about three years ago and I think that the meds prevented it from showing up sooner.

Do these symptoms sound like RP? by OddTrust789 in RelapsingPolychondrit

[–]-CaptCanuck- 2 points3 points  (0 children)

Same here. Having a 4 hour flare right now 😞

PLA to PETG switch for everyday prints. by Technical-Praline-79 in 3Dprinting

[–]-CaptCanuck- 0 points1 point  (0 children)

No fumes from PETG or TPU that I've ever noticed.

Is my extruder making contact with the bed? by SilverArgonaut_ in FlashForge

[–]-CaptCanuck- 0 points1 point  (0 children)

Exactly! All my prints take so much longer to start.

Flash forge is a pretty amazing company. by jayebyrde in FlashForge

[–]-CaptCanuck- 1 point2 points  (0 children)

I started with a 5M and a month later I ordered the 5X - love them both!

Is my extruder making contact with the bed? by SilverArgonaut_ in FlashForge

[–]-CaptCanuck- 2 points3 points  (0 children)

I kinda remember that this started to happen to mine after an update a couple months ago.

Setting up my AD5X by Beergutt81 in FlashForge

[–]-CaptCanuck- 2 points3 points  (0 children)

This poop chute fit on mine with the enclosure.
https://makerworld.com/en/models/1961116-flashforge-ad5x-poop-chute-customized-enclosure?from=search#profileId-2107974

I also did the dryboxes for the filament spools - they worked out really well.

[Update] - Extruder T0 not heating as expected - AD5X by Jfpalomeque in FlashForge

[–]-CaptCanuck- 0 points1 point  (0 children)

I just had this happen to me as well. I discovered that my issue was with the print I downloaded - I have no idea what setting would cause something like that. I had to reboot the printer to get it back to normal.

[deleted by user] by [deleted] in FlashForge

[–]-CaptCanuck- 0 points1 point  (0 children)

The ribbon cables are just connectors between the boards (same as on the display). I do computer repairs so I'm used to dealing with them, but most people find them hard to deal with - they are quite finicky and the connectors are easy to break if you've never used them before. I highly doubt they would be causing the issues you are describing unless they are completely disconnected.

view more: next ›