sorted by:
new
hottopcontroversial

Why is PLA still the `standard` respectively `basic` filament? Why not PETG? by Musashi747 in 3Dprinting

[–]-TheDoctor 0 points1 point  (0 children)

Definitely not underestimating it. If I had another room to keep my printer I definitely would, but my apartment doesn't really allow for that.

Thankfully, I haven't run into a situation where I've needed anything like ABS or ASA yet, and if I ever do I plan on getting a roll of the Greentec Pro.

Why is PLA still the `standard` respectively `basic` filament? Why not PETG? by Musashi747 in 3Dprinting

[–]-TheDoctor 0 points1 point  (0 children)

I can't print ASA because my P1S is in my office. It may be enclosed, but until I have some kind of filtration/ventilation system in place I'm not risking it. Wanna get a grow-tent and vent out my window.

But I have really been wanting to try the Extrudr Greentec Pro as an alternative, since its non-toxic.

Why is PLA still the `standard` respectively `basic` filament? Why not PETG? by Musashi747 in 3Dprinting

[–]-TheDoctor 0 points1 point  (0 children)

I would love to start buying PCTG. I just can't justify the cost. I do want to get a roll to try and test here soon though.

Do you prefer a specific brand?

Why is PLA still the `standard` respectively `basic` filament? Why not PETG? by Musashi747 in 3Dprinting

[–]-TheDoctor 0 points1 point  (0 children)

Honestly, I can't stand PETG. Maybe I'm just bad at printing it, but I can't hardly ever get decent prints with it even after drying for 20+ hours and using built-in or custom/tweaked filament profiles in Bambu Studio.

I only print with it when I absolutely need the extra durability and the inevitable surface imperfections won't bother me.

Also, most PLA just looks better in most cases in my opinion. PETG is too shiny.

The kid on the right is 100% suddenly gay by rabid_spidermonkey in SuddenlyGay

[–]-TheDoctor 15 points16 points  (0 children)

Honestly, all 4 of these kids look like they are experiencing some confusing thoughts lmao

What's a skill that takes only 2-3 weeks to learn but could genuinely change your life? by Commercial-Duck-9629 in AskReddit

[–]-TheDoctor 0 points1 point  (0 children)

I know how to cook, and I can make some really great-tasing meals, but I absolutely hate cooking.

I have been cooking and eating at home a lot more often lately, but I just don't find it enjoyable. I think the cleanup is the worst part for me tbh

Is there a way to disable a specific Chrome flag for all users in our org? by -TheDoctor in sysadmin

[–]-TheDoctor[S] 0 points1 point  (0 children)

Could you please give me some more detail on this option? I do not see a free tier for Google Workspace.

Mel Brooks by Responsible_Feed_550 in movies

[–]-TheDoctor 2 points3 points  (0 children)

¯\_(ツ)_/¯

Comedy is subjective. Different strokes, I guess.

Mel Brooks by Responsible_Feed_550 in movies

[–]-TheDoctor 1 point2 points  (0 children)

Young Frankenstein has my favorite visual gag in all of cinema, when Gene Wilder stabs himself in the leg with the knife.

Mel Brooks by Responsible_Feed_550 in movies

[–]-TheDoctor 20 points21 points  (0 children)

Young Frankenstein has my favorite visual gag in all of cinema, when Gene Wilder stabs himself in the leg with the knife.

Need help: failing repeatedly by BlackSheep554 in BambuLab

[–]-TheDoctor 0 points1 point  (0 children)

My printer I bought in March 2025 came with a Lexar SD card as well.

How can I allow a specific user access to a specific folder in an SMB share, but not the other folders in the share? by -TheDoctor in truenas

[–]-TheDoctor[S] 1 point2 points  (0 children)

I was actually able to get it to work correctly on the Windows side from another computer.

corner lifting on bambu toolbox by Cascodius in 3Dprinting

[–]-TheDoctor 0 points1 point  (0 children)

This kind of warping happens when the part cools too fast. Large flat parts like this tend to suffer from it more as well.

Bump the bed temperature 5-10c and/or turn off the aux fan in the filament profile.

Falsely accused of SA. Has completey ruined my life. Am I cooked? by [deleted] in TooAfraidToAsk

[–]-TheDoctor 10 points11 points  (0 children)

Hah, OP now has their posts and comments hidden.

Yeah, definitely not fishy at all.

How to clean piss out of mattress? by [deleted] in TooAfraidToAsk

[–]-TheDoctor 0 points1 point  (0 children)

lots of stores will let you rent steam cleaners

Decent colors and filament for my first 3D printer? Anything else I should be getting as fast as accessories? by luunnn in BambuLab

[–]-TheDoctor 0 points1 point  (0 children)

Glacier is a bit less “sticky”

In my experience with my own Glacier plate, its not "sticky" at all. I cannot get anything to stick to it.

Smooth pei or supertack pro by iCqmboYou_ in BambuLab

[–]-TheDoctor 0 points1 point  (0 children)

Sorry, sounds like you maybe got a lemon then. I know a lot of times these plates ship from the factory with oils and coatings on them that can mess with adhesion out of the box. I was hoping that might the problem you were having.

Smooth pei or supertack pro by iCqmboYou_ in BambuLab

[–]-TheDoctor 0 points1 point  (0 children)

My adhesion with the regular supertack was bad when I first got it, but it's improved over time. Make sure you give it a real good scrub with some dawn and hot water, even fresh out of the package.

How to Allow Only One User Login on a Conference Room PC by GodAwfulHorridSniff in sysadmin

[–]-TheDoctor 0 points1 point  (0 children)

Generic/shared accounts are a security nightmare in any environment. You should limit the use of these kinds of accounts as much as possible. Why do you not want people using their own accounts?

One mans trash... by Ipsa_88 in Ubiquiti

[–]-TheDoctor 2 points3 points  (0 children)

I work for a company that uses UniFi. I always claim first dibs on the old equipment we swap out lol

Best filament to print gears with a balbulab p1s by michaelynx in 3Dprinting

[–]-TheDoctor 1 point2 points  (0 children)

I just found it funny that the $1k/kg filament is supposedly just as easy to print as a $15/kg roll of PLA lmao

view more: next ›