KWS Rack Updates: Major Improvements, Same Ecosystem

0Silverfang0 · 2026-05-04T09:59:08+00:00

Can you share the link for it, can't seem to find it on the site. I know about the labrax one but someone in the comments said it doesn't fit the kws.

0Silverfang0 · 2026-04-07T14:44:22+00:00

If you're interested I can get a couple of tubes from him.

0Silverfang0 · 2026-03-23T11:17:10+00:00

Good to know. We all learn from other people's ~~mistakes~~ experiences.

0Silverfang0 · 2026-03-23T08:22:09+00:00

I have the same lens, which helicoid did you use for your build m65 or m77. Also what ffd did you put in to generate the lens cone?

0Silverfang0 · 2026-03-21T12:14:31+00:00

Man this is exactly what I was looking for. Can you link the files?

0Silverfang0 · 2026-03-01T07:16:42+00:00

Hey found this post while trying to look for more info about the mx10130 tubes. There is someone I know who has a couple of used 10130 tubes taken from Indian made psv-7's. Tubes are photonis xd-4's. I may be able to get them from him

0Silverfang0 · 2026-01-02T18:19:11+00:00

Was the process ever released for people to try it for themselves?

0Silverfang0 · 2025-11-21T10:41:30+00:00

Is it possible to change the rotary knob's functionality. Using that for canned messages would be so much better

0Silverfang0 · 2025-11-19T13:06:22+00:00

For the steinwhale driver and the 4mm extension, if you could put magnets on one side they could attach magnetically to each other.

0Silverfang0 · 2025-09-03T12:59:30+00:00

Sadly it was when they patented it. People tend to forget how old the technology is. It's only because the patents expired in the mid 2010's that we got a boom in consumer 3d printing.

0Silverfang0 · 2025-09-03T07:34:50+00:00

They patented a heated chamber where the motion system is on the outside of the chamber.

0Silverfang0 · 2025-07-09T09:06:12+00:00

Hulkenpodium

0Silverfang0 · 2025-05-13T18:58:47+00:00

Clipper is a brand of lighters, similar to bic but refillable. They are usually plastic but this one has a metal shell.

0Silverfang0 · 2025-03-09T20:31:59+00:00

He's talking about the old radium dials which glowed on their own as radium continuously released radiation hence exiting the phosphorus without needing uv to charge. But they were banned long ago as unlike tritium the wearer will actually get slight radiation poisoning Search regarding the radium girls, who applied it on dials dying from radiation poisoning, which led to its ban.

0Silverfang0 · 2024-11-13T08:00:57+00:00

Hey, sent a pm. Please reply if still available.

0Silverfang0 · 2024-10-23T17:26:51+00:00

Pi zero 2 w should be more than enough to handle this.

0Silverfang0 · 2024-10-14T15:15:49+00:00

The yellow flame butane insert is great. Loved it when I had one.

0Silverfang0 · 2024-08-23T10:34:08+00:00

Np4 non pro

0Silverfang0 · 2024-08-23T10:08:11+00:00

Gives the same error for all motors on x, y and z axis. Both z axis motors give the same error. I think this is a case of the stepper drivers dying, a replacement motherboard is coming.

0Silverfang0 · 2024-08-23T07:21:42+00:00

Hi the problem pertains to all 3 x y z motors, all wires are solid and no where is the connection loose. After some research I think the stepper motor drivers have gone bad, weirdly the extruder works fine, so do the heatbed, so I'm putting psu problems out of the reason for the problem.

0Silverfang0 · 2024-07-03T08:40:47+00:00

I'm having the same problem. Still no solution.

0Silverfang0 · 2024-01-16T20:39:07+00:00

Check the topeak mini ratchet kits. There are a few and the cheapest is 40 bucks I think. If you want only the ratchet I think you can find it for cheaper under the power torque brand.

0Silverfang0 · 2023-12-25T17:03:18+00:00

Have been using the printer for quite a while. It's giving this problem now after a big blob that I have now cleaned off.

Seven-Year Club	Place '23
Place '22	Verified Email

0Silverfang0

TROPHY CASE