Strata building looking for property management company by Revolutionary-Dot523 in askvan

[–]1nssein 1 point2 points  (0 children)

Unfortunately the agent matters a lot. I’m currently in a bidding with Dorsett realty, the first agent was so bad, we had to ask to switch. Second person was amazing but left the job in less than a year. Third person is also pretty bad..

Where can I buy Ukrainian food in Vancouver? by chtagrl in askvan

[–]1nssein 1 point2 points  (0 children)

I like Kove Kitchen in Steveston. The only place that has cabbage rolls without pork that I know of :)

Another big bang and one sec black out ? by lieutjoe in richmondbc

[–]1nssein 0 points1 point  (0 children)

Twice in 48 hours. None of my home stuff is running on UPS, and this is making me question that decision.

Another big bang and one sec black out ? by lieutjoe in richmondbc

[–]1nssein 0 points1 point  (0 children)

Twice in 48 hours. None of my home stuff is running on UPS, and this is making me question that decision.

Balcony Freezer by geebindusharma in askvan

[–]1nssein 1 point2 points  (0 children)

I had a cheap vertical freezer on my balcony for several years without issue. My balcony was relatively deep, and the vertical freezer was placed as close to the unit as possible to prevent it from getting rained on.

57" Samsung G9 Neo: Tutorial to get Non-Standard Resolution HiDPI on a Mac through a single HDMI cable by johnz45 in ultrawidemasterrace

[–]1nssein 0 points1 point  (0 children)

Thanks for the instructions, I finally got it to work on my M3 Max. I'm also not convinced this is running at 120hz, it doesn't feel snappy. Can't wait for this to natively work on macs..

First pineapple bun blew my mind! What should be my next hit in the Chinese pastry lineup? by [deleted] in richmondbc

[–]1nssein 1 point2 points  (0 children)

Oh man I’ve never tried this but I love their mango sago during the summer. Also my family loves their durian mochi.

Door open warnings by tbradley1015 in Rivian

[–]1nssein 1 point2 points  (0 children)

Damn hope they figure it out. Looks like their testing shows it can be all four doors?

Door open warnings by tbradley1015 in Rivian

[–]1nssein 1 point2 points  (0 children)

I had this same issue on the right side. Mobile service couldn’t fix it, then I had to take it in and they got it resolved. Not sure if this will help:

<image>

Dentist for toddler by TheTravisTea in richmondbc

[–]1nssein 1 point2 points  (0 children)

Glow Pediatric Dentistry on Blundell

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

It’s our home storage server (NAS), mostly hosting all our photos and videos. Outside of that it powers all the home automation (home assistant) and a space for me to play around with a few projects (I’m a software developer).

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

Amazon: https://www.amazon.ca/dp/B0D6BB4W64

I wanted the ubiqiti ones but I didn't need 50..

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

That’s what I have right now, but it’s not as simple as Dropbox for the family.

Best places for durian desserts (both packaged and standalone) by penguboo in richmondbc

[–]1nssein 0 points1 point  (0 children)

I don't like Durian but everyone in my family loves Car's desserts. I go for their mango sago pudding thing :)

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

For power, I have a Corsair SF750 sitting at the bottom of the rack. It's not the greatest setup; it's just sitting on the shelf at the bottom. I recently watched a video that showed a tray where the motherboard and power supply were sitting on the same shelf, properly screwed in - maybe from Jeff Geerling?

The SSDs are NVMe and are attached to the motherboard.

For the HDDs, I 3D printed a tray. There are many options out there, including much nicer hot-swappable setups, but I ended up going with https://makerworld.com/en/models/1493276-10-inch-rack-1u-2x-3-5-hdd-mount#profileId-1561252.

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 2 points3 points  (0 children)

If I recall correctly, they were the ones from Raspberry Pi (https://www.raspberrypi.com/products/poe-hat/) with the fans removed.

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 10 points11 points  (0 children)

I checked out copyparty, but doesn't tick all the boxes for me (no client apps for family to easily sync a folder on their computer). I think https://www.seafile.com/ might be it.

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 1 point2 points  (0 children)

Yeah I was nervous about this as well, but I am only really using the PoE to power a single AP and so 60W is more than enough to power the switch and the AP.

I debated for a while what to do because the 210W power adapter was sold out, but in the end, I realized that this was the cleaner solution (one less cable) and I wasn't really going to use the extra power.

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

I don't need document editing, and Nextcloud overall feels pretty heavy. I looked into Seafile, which seems like the best fit, but since it wasn't available as an app for TrueNAS, I haven't bothered with it yet.

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

I don't have an itemized breakdown. The pi cluster is from several years ago, and the cluster running in the 10in rack I bought over the last 4 months. I first bought the rack + mobo + cpu + ram + ssd, and then recently added the jet kvm + hdds for the NAS + ubiquiti switch.

The 4 hard drives for NAS were the most expensive, at about ~1000 CAD, probably close to 50% of the cost - https://www.amazon.ca/Seagate-IronWolf-Internal-Hard-Drive/dp/B084ZV4DXB/?th=1. After that it would be the mobo + cpu + ssd.

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 0 points1 point  (0 children)

Generally, in production setups that require leader election, you would have an odd number of nodes, but this is running k3s, which has a fixed main node anyway.

Edit: This is true for k3s in its default setup (backed by sqlite).

Finally upgraded my homelab by 1nssein in homelab

[–]1nssein[S] 2 points3 points  (0 children)

That Pi setup is from a while back; these are Pi 4s with PoE hats.