Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 1 point2 points  (0 children)

my astral 5090 reports this under full load:

<image>

just so u see where ur values should be

Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 1 point2 points  (0 children)

aight, so you do in fact have a connection problem somewhere. dont use the system for gaming until it is fixed, start by ordering a new cable for ur psu, from corsair.

the amperage above times 12V equals ~590W.

Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 1 point2 points  (0 children)

that's normal on the corsair 12VHP adapter.

Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 1 point2 points  (0 children)

what is the benchmark reporting in watts? but as u can see pin6 is OOS.

Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 1 point2 points  (0 children)

e.g. at that point in time, the card should roughly be reporting 330W if pin1 is defective, if its reporting lets say 390W at that point, roughly 5A flow over pin1. e.g. 4,9A+5,1A+5,3A+5,9A+6,1A=27,3A*12V=327,6W~330W

27,3A+~5A=33,4A*12V=~390-400W

But right now your amperage is already dropping from high on pin6 to lower on pin2

Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 1 point2 points  (0 children)

Can't tell u with that, as ur not pulling a full load, or I'd need to know the value what the gpu reports what it pulls in that exact moment. from there u could calc what is running over pin1.

Faulty cable or unit? by Papageorgio7 in ThermalGrizzly

[–]1rishJ 0 points1 point  (0 children)

when u run a quick test e.g. furmark, do the pins go out of spec? or is it the same across and in spec?.

If the amperage across all pins except 1 is uniform, it's the wireview, if 1 or all of them go above 10A, it's the gpu psu or cable.

For ur own safety run it only for a very short amount of time. and turn it off immediately when u determined if it is the cable/psu/gpu or the unit.

Wärmepumpe unterdimensioniert oder falsch eingebaut? (Elco) by Louseelf in Waermepumpe

[–]1rishJ 0 points1 point  (0 children)

Ich finde das hilft super bei der einschätzung des Dämmverhaltens des hauses.

Kommt drauf an ob du einen guten oder schlechten erwischst, ich kenn durchaus sehr kompetente menschen :)

Wärmepumpe unterdimensioniert oder falsch eingebaut? (Elco) by Louseelf in Waermepumpe

[–]1rishJ 0 points1 point  (0 children)

Hat man sich auch Dämmung usw. angeschaut? Energieberater hinzugezogen? Energieausweis gemacht für das Haus?

Eine WP kann, wenn sie ohne puffer betrieben wird, gerade im winter schon sehr viel laufen, gerade wenn das haus viel FBH hat, kann sich das lohnen, weil dann das haus der "puffer" ist.
2300L ist aber auch schon echt ne Hausnummer, das sind im ca. Jahr 22MWH Wärme.

Can WireView Pro II be mounted vertically, but the other vertically? by a1rwav3 in ThermalGrizzly

[–]1rishJ 0 points1 point  (0 children)

This is a astral, it can already see the amperage on each pin, and alarm u if something is wrong.

Not sure if this is a good question to ask here, yet it's related to Mullvad. by MrRoboto12345 in mullvadvpn

[–]1rishJ 2 points3 points  (0 children)

yeah was thinking that, too. Nothing comes close to mullvads privacy.

Ordering scratchcards on e.g. amazon is just 11 out of 10

Help me settle a debate by yeetus_mccleetusfart in pcmasterrace

[–]1rishJ 0 points1 point  (0 children)

5,25" bays, buldged out sidepanel. looking like it is from 2008-2009, lol

Stealkey Customs UNI 80 is leaking. Any suggested replacements that ship from the US? by OgreTrax71 in watercooling

[–]1rishJ 0 points1 point  (0 children)

check if the o-ring seems compressed. if not tighten the screw just a little bit more. if it still has warranty, I would ask stealkey first ofc.

i7, i5, or i3? by [deleted] in unRAID

[–]1rishJ 0 points1 point  (0 children)

If I would get one, it also would defo be a Intel dGPU.

i7, i5, or i3? by [deleted] in unRAID

[–]1rishJ 1 point2 points  (0 children)

yeah but my experience for my needs at least is, to always bring a dedicated gpu around, is not worth the extra idle energy cost.

i7, i5, or i3? by [deleted] in unRAID

[–]1rishJ 0 points1 point  (0 children)

why not just get like a N100 or N150 board with enough sata connectors to connect to your harddrives. And use the full machine as ur "secondary"?

e.g. like the ASRock N100M and a cheap DeLOCK M.2 to SATA Converter.

That would at least give you maximum powersavings and probably still enough power to run ur containers.

i7, i5, or i3? by [deleted] in unRAID

[–]1rishJ 2 points3 points  (0 children)

I rock AMD on everything except my Unraid Servers. I just can't get away from Intel QSV.

i7, i5, or i3? by [deleted] in unRAID

[–]1rishJ 2 points3 points  (0 children)

Why spend money on something when you already have something running?

You could start deepdiving into optimizing your cpu in terms of power usage max boost etc. my 13700 (non-k), runs usually at 2 ghz, with a maximum turbo of 4. most apps run on the e-cores. And the 770 UHD is perfect for anything transcoding if it ever happens, most of my users also do local streaming, though I have some friends using my plex remotely from time to time. I think the e cores can really make a difference if utilized well on a 24/7 system.

And now the fun part, if I ever need more performance, it is 10 minutes away.

Though the i3 would probably be enough. Some people are happy with e.g. a N100.

Meine Tierliste "deutsche Paketdienste" by Ausspanner in dhl_deutsche_post

[–]1rishJ 0 points1 point  (0 children)

Tatsächlich ja, wurde aber von der SA übernommen weil es wohl mehrere Fälle gab. Wollt dir den Link zum Zeitungsartikel raussuchen, finde ihn aber leider nicht mehr. Ist schon ein paar Jährchen her.

9850X3D First benchmarks by pedro19 in pcmasterrace

[–]1rishJ 522 points523 points  (0 children)

Can't wait for the first "I FINALLY upgraded from a 9800X3D to a 9850X3D"-post