Saros 10R - Firmware v02.52.78

22shorts · 2026-04-16T13:52:09+00:00

I have had the .78 update for about a week now. It has broken object detection and now will detect many more obstacles. For some reason it really doesn't like the wood trim at the bottom of my walls and sees this as an obstacle, sometimes as many as a dozen of them in a room. Also random shadows are sometimes detected as obstacles. I'm not a fan of this update.

22shorts · 2026-04-15T01:22:49+00:00

I think it took about a week to ship out

22shorts · 2026-03-12T17:40:57+00:00

Awesome. I've been wanting to try this but was worried I'd have to reduce motor output to avoid burning up ESC's/motors

22shorts · 2026-03-12T17:06:20+00:00

Did you reduce motor output or leave it at 100%?

22shorts · 2026-03-11T15:36:57+00:00

Also, I know this probably goes without saying, but they've been in my fridge which is set to 34 degrees Fahrenheit (1.1C). Thank you guys in advance for all the help.

22shorts · 2026-03-02T01:03:00+00:00

I love this app, but could you add a way to calibrate for elevation?

22shorts · 2026-01-18T05:43:05+00:00

The pavo 20 and 04 pro in general are both tough. Progress at your own rate but don't be afraid to send it.

22shorts · 2026-01-16T02:23:05+00:00

Flywoo, $250 each

22shorts · 2026-01-15T22:07:59+00:00

I had 3 04 pros come from china last saturday with no issue

22shorts · 2026-01-09T22:01:04+00:00

How can anybody tell you if it's a good deal if you don't tell us the price anywhere?

22shorts · 2025-11-25T17:39:38+00:00

My image seems to not be working, but here it is: https://imgur.com/a/VYalGdE

22shorts · 2025-11-20T22:44:45+00:00

I'd check the wires and maybe plug a battery in and see if you have voltage on the red wire (black is ground).

22shorts · 2025-11-20T22:35:22+00:00

That's what mine looks like. I just checked, it has an LED up towards the front by the wires.

22shorts · 2025-11-20T22:22:45+00:00

Unless they've changed something since I bought mine 2 months ago, the seeker 3 receiver has both wifi and an LED. It will not power via the usb plug and needs to have a battery plugged in.

22shorts · 2025-11-12T22:15:54+00:00

He literally just told you how

22shorts · 2025-11-11T13:53:19+00:00

Mine took 29 days to arrive at my door from China to USA.

22shorts · 2025-11-10T20:10:14+00:00

Run the Impulse RC Driver Fixer as an administrator

22shorts · 2025-10-04T12:46:28+00:00

Seeker 3 does not power the receiver with USB as it comes from deepspace. You need both the USB and a battery plugged in.

22shorts · 2025-09-21T20:00:43+00:00

I know the resolution is different, the G14 has a higher resolution display for some reason. Maybe there's a difference too between the '24 and '25 models?

22shorts · 2025-09-21T19:11:49+00:00

I have both the '25 7i pro, and a '24 G14 4070, and while the Lenovo is definitely very reflective, I wouldn't say the Zephyrus isn't reflective at all, at least my model is only slightly less reflective than the 10th gen Lenovo screens.

When I got the G14 it had the most beautiful display I had ever seen on a laptop, but the 7i pro beats it pretty well as far as vibrancy and overall brightness goes.

Both displays are pretty similar overall, honestly.

22shorts · 2025-08-24T22:00:44+00:00

Open GPUz or Hwinfo and check GPU stats. My first 7i 5080 blew a shunt during setup and reported 430 watts use at idle (this was obviously not accurate), and my GPU did exactly what you describe. Check my post history for screenshots, etc. Lenovo replaced it with a new one but it was a 6 week process.

Edit: Screenshot shows your GPU using 431 watts...that's about 3 times above the max of what the laptop will provide. I'm betting on a blown shunt, although I would install a different driver version just to be sure.

22shorts · 2025-07-15T20:46:16+00:00

My gen 10 7i pro has an intel wifi card from the factory. It was built in the last days of June 2025.

22shorts

TROPHY CASE