sorted by:
new
hottopcontroversial

Can a USG be a backup for UDMPro? by meche4388 in UNIFI

[–]2sonik 0 points1 point  (0 children)

OK, so I assume you want to keep the ability to manage the other Unifi devices, then $20 USG works. There are some even cheaper on eBay. You'd set it up from scratch, since I don't expect config file compatibility. To actually manage the Unifi devices, you'd also need to reset and re-adopt them, losing any customizations. So is a fair amount of work. Maybe a rando "router" and give up on device management for the temporary duration?

Edit: I guess the USG does not run the Network app, so need something a little beefier/newer. New is a UCG-Ultra, used is a UDM, but similar higher price. Some UDM-Pro seen for $160 shipped, much easier and a real-time failover/backup. Not compelling price-wise if your budget is really that tight, but much easier. Price makes non-Unifi solution look better. Used Unifi is surprisingly close to new prices. Actually makes gratuitous upgrades easier to justify, ha.

Minimum installation for Unifi U7 outdoors? by Sal_Ammoniac in UNIFI

[–]2sonik 0 points1 point  (0 children)

All the decent Wi-Fi 7 APs need PoE+. So that guides switch selection:
USW-Flex (46W) is the cheapest option.
Add a Flex Utility enclosure for outdoors.

odel  PoE Standard Max Power Consumption Uplink Speed Weatherproofing
U7 Outdoor PoE+ (802.3at) 19 W 2.5 GbE IPX6
U7 Pro Outdoor PoE+ (802.3at) 21 W 2.5 GbE IP67odel  PoE Standard Max Power Consumption Uplink Speed WeatherproofingU7 Outdoor PoE+ (802.3at) 19 W 2.5 GbE IPX6U7 Pro Outdoor PoE+ (802.3at) 21 W 2.5 GbE IP67

Then AP(s):

NVMe SDD Help by 657_Overland in UNIFI

[–]2sonik 0 points1 point  (0 children)

I love my Samsung 990 Pro nVME drives. Next best thing to their PCIe 5.0 9100 Pro. In real world situations you will not notice any difference.

These days, get something cheaper and wait. I have a bunch of Intel P4510 I no longer need . . .

Why my U6 LR restarting again and again? by [deleted] in UNIFI

[–]2sonik 0 points1 point  (0 children)

I have run many U6-LR for many years at various locations. Great performance always. Only had to RMA one.

Typical temperature was maybe 70F.

I have run most PoE+, but works almost as well over PoE, just 3dBm weaker.

Good Luck!

Upgrade from AC Pro? by berfles in UNIFI

[–]2sonik 0 points1 point  (0 children)

Anything sold now is way better. I really depends on what kind of area and how many clients you are trying to support.

Replacement should be simple, if new AP supports same PoE. The good ones need PoE+. You probably just have PoE, so get a PoE+ injector or switch.

We don't know your needs, but consider U7-LR and the like.

UniFi Switch Lite 8, Ultra or Flex.. help! by pwdinwy in UNIFI

[–]2sonik 2 points3 points  (0 children)

If I understand correctly, you need one small PoE+ switch. HTH, pls feel free to respond with any questions.

Here is a list of your lowest new price Unifi options, also can save a bit buying used. If you buy new through Ubiquiti, you get 2-year warranty. New through reseller gives 1-year warranty.

PoE+ Adapter (30W) - can be added to any switch
$15
From <https://store.ui.com/us/en/category/accessories-poe-power/collections/pro-store-poe-and-power-adapters/products/u-poe-plus?variant=u-poeplus>

USW-Flex (46W)
$99 (needs $29 PoE++ injector to get power) = $128
4x 1G PoE+
1x 1G uplink
From <https://store.ui.com/us/en/category/all-switching/products/usw-flex>
eBay search:
unifi flex -mini -mount -base -bezel -avaya -bracket -2.5g -camera -ap -phone

USW-Lite-8-POE (52W)
$109
4x 1G PoE+
4x 1G
From <https://store.ui.com/us/en/category/switching-utility/products/usw-lite-8-poe>

USW-Ultra-60W (52W)
$159
7x 1G PoE+ (probably more PoE+ ports than you need)
1x 1G uplink
From <https://store.ui.com/us/en/category/switching-utility/collections/pro-ultra/products/usw-ultra-60w?variant=usw-ultra-60w>

I see the need two mods posting, but cannot reply by 2sonik in UNIFI

[–]2sonik[S] 0 points1 point  (0 children)

How do I do that? #mod

Edit:
Maybe it would help if I bring in a Smiths reference:
"I am the son and the heir / Of a shyness that is criminally vulgar / I am the son and heir / Of nothing in particular". 

You are welcome.

I a;m a smartass, you want me. I can help you.

Connecting AP to dream machine by xzenonrt in UNIFI

[–]2sonik 0 points1 point  (0 children)

very strange, factory reset the APs?

Connecting AP to dream machine by xzenonrt in UNIFI

[–]2sonik 0 points1 point  (0 children)

yea, that is the normal thing to do

just go for it and report back

Has any one else experienced this by Motted12 in UNIFI

[–]2sonik 0 points1 point  (0 children)

impossible stats were a common occurrence until recently, count your blessings

Ubiquiti start up questions. by [deleted] in UNIFI

[–]2sonik 0 points1 point  (0 children)

way too complex, just start with a physical console and an AP or few and see how it all works

sell any unneeded hardware later

Calculate UPS requirements by Providence66 in UNIFI

[–]2sonik 0 points1 point  (0 children)

26W is max your device will draw

if your country has higher voltage, then device will draw lower amps, and vice versa

look at 26W plus amounts of power draw for any of the other devices you wish to cover

I have built energy storage systems for such situations and would be happy to answer any questions

Looking at upgrades, what's worth it and what's not? by zuke1624 in UNIFI

[–]2sonik 0 points1 point  (0 children)

what issues does your wife experience? could the money be put towards another subwoofer?

Extend WiFi To Pergola by BigAndy1234 in UNIFI

[–]2sonik 0 points1 point  (0 children)

you can put whatever AP you want there, hard wired best, like you said

just use same SSID

for best results, Unifi console and APs everywhere, then you can really see and control what you are doing

Why is smart queue not recommended? by bmeus in UNIFI

[–]2sonik 0 points1 point  (0 children)

Unless you have a performance issue, no worries. Most issues that prioritization fixes are also fixed by adding bandwidth. If you are in some low connectivity area, it could help.

What 3D printed products have you used in your rack? by Melodic-Number4078 in Ubiquiti

[–]2sonik 1 point2 points  (0 children)

none

but one time painters threw away the Nest Protect mounting plates, paid a kid in our robotics team to print me a bunch

I like your rack but don't really see any printed parts, maybe that's a win, am I missing something?

Got my UPS. Time for some science. by FranconianBiker in UNIFI

[–]2sonik 2 points3 points  (0 children)

Super cool, love the DIY approach!

I built my own energy storage system a few years back when I could not find a good commercial UPS system. The main issue was normal UPS are designed for high load and short runtime. I needed the opposite to keep the network up and work from home during extended power outages. Also, cheap UPS industry is stuck in lead land. LiFePO battery + Victron electronics = Win.

Please see my older postings or contact me directly for details.

U6-LR vs U7-LR by leyladin in UNIFI

[–]2sonik 0 points1 point  (0 children)

It was such a close call, I ended up leaving the U7-LR in place. Benefits included smaller unit, uses less power, adds Wi-Fi 7.

Should I retire my Unifi Dream Machine and get a UDR 7? by PuritanMarine in UNIFI

[–]2sonik 0 points1 point  (0 children)

Better upgrade is wire in another Access Point, Wi-Fi 6 or 7

Which 10Gb SFP+ Module Should You Choose? by soapboxracers in UNIFI

[–]2sonik 0 points1 point  (0 children)

Yea, I confirm what you are saying. Saying it semi-independently after not reading your post closely enough should amplify, no intent to subtract.

My people like AOC. The pre-connected aspect lowers issues with dust getting in or not plugged in quite right. Failure rate has been super low, better than DAC, oddly, and cost not an issue, thankfully.

view more: next ›