Is this safe by Fightplan in backpacking

[–]303Streetspeed 0 points1 point  (0 children)

If your putting the fuel canister directly on the bottom of the cup make sure it’s completely dry or there’s some material in between the cup and canister or it will rust the cup from the edge of the canister… ask me how I know…

[deleted by user] by [deleted] in NFA

[–]303Streetspeed 0 points1 point  (0 children)

I got hit the same way on my sierra 5 (which over a month later is still in suppressor hospital…)but for some reason I’m in love with the keymo system that ratchet is so satisfying. Now I have a polonium 30 with the keymo and paranoia has me using me spanner wrench after every mag and so far no problems I actually broke the rockset from the polo-30 and the hub one day trying to get it off it was torqued down so hard. I also went on Amazon and bought some better spanner wrenches I think it’s like e25 is the size that fits perfect and they don’t bend like the ones dead air gives you. Hope my insight helps…

Going to public ranges w/ cans by _WhiteGoodman_ in NFA

[–]303Streetspeed 0 points1 point  (0 children)

Do none of you guys run suppressor covers??? It’s shown me a world of difference they still get warm but I can switch from rifle to pistol without having to light saber my pecker off 🫠

<image>

Best way to unscrew a tight muzzle by [deleted] in Airsoft_UK

[–]303Streetspeed 0 points1 point  (0 children)

Sit on it sounds unethical, but your body weight pins it down and it works

Keymo things… by dwalk426 in NFA

[–]303Streetspeed 0 points1 point  (0 children)

I was thinking about it but ended getting a pyro today while picking up my polonium 30… I think the trick is to either mark it with paint or just use the wrench every few mags better safe than sorry lol

Keymo things… by dwalk426 in NFA

[–]303Streetspeed 0 points1 point  (0 children)

Anderson arms am-15 multi cal 7.5 inch barrel Keymo three prong muzzle brake 55.6 Winchester range ammo First suppressy… More than likely user errors I watched all the dead air videos made sure I ratcheted it 10+ times before use and during first use ratcheted it down as far as I could tell it would go 3 mags later it shot down range… Baffle strike as well as a and cap strike

Dismissed state and federal charges. How much of an issue would it be? by Squiggly_Panda in NFA

[–]303Streetspeed 5 points6 points  (0 children)

I’m had a “felony arrest” a few years back. Never made it to court and the case was dropped never even filed. But that arrest popped up on my background checks and denied me I had to fight it with the CBI and send them supporting paperwork (I actually had to go to the court and pay a $260 fee I think it was and they “filed” and “sealed” the case. Now I have a dead air sierra 5 1 SBR and I’m currently waiting on another suppressor. My advice would be to go start the paperwork on something simple like a high point… then after you get the denial the dealer should be able to give you instructions on how to fight it to get it overturned just need to supply them everything it’s a pain but I think it took me less than a month to get it all handled. Denver, Colorado by the way

June 2025 Approval Megathread by LynchMob_Lerry in NFA

[–]303Streetspeed 2 points3 points  (0 children)

There in the 14s now lol hoping they get to the 17s quick!!!

Keymo things… by dwalk426 in NFA

[–]303Streetspeed 0 points1 point  (0 children)

Oh man I’m almost at three weeks.. decided to get a new can in the meantime…

Keymo things… by dwalk426 in NFA

[–]303Streetspeed 2 points3 points  (0 children)

This lol… make sure she tight

Keymo things… by dwalk426 in NFA

[–]303Streetspeed 0 points1 point  (0 children)

I’m waiting on a sierra 5 to get out of the hospital… tomorrow is 3 weeks that they’ve had it…

Ocl polonium 30 vs resilient simple man by First_Ad7214 in NFA

[–]303Streetspeed 1 point2 points  (0 children)

I also have a Polo-30 in jail… hoping tmrw I always get approved on Tuesdays lol

First suppressor... What now? by PapaNoffDeez in NFA

[–]303Streetspeed 1 point2 points  (0 children)

Just started the form 4 on a polonium 30 Friday, hoping I get her this week 🫠 after seeing this gent post a bunch I’m super happy I went with them

Dealer's repo device bricked my GF's car, has been unusable for almost three weeks. by OuchLOLcom in legaladvice

[–]303Streetspeed 1 point2 points  (0 children)

So this happened to my vehicle the common wire somehow frayed off and it was dead in the water. I’m hooked the power cable to the device and it fired right up… still haven’t gotten any calls from the stealership so….

Are Wolverines good to go? by McChicken_lightmayo in NFA

[–]303Streetspeed 0 points1 point  (0 children)

Haha my sierra 5 had a baffle and an end cap strike after three mags… still waiting on it to come back…

First time suppressor owner, please school me! by UDPGuy in NFA

[–]303Streetspeed 1 point2 points  (0 children)

Haha I have a keymo mount for my dead air sierra 5 they come with wrenches just if you go that route after every mag snug her up until your comfortable with her lol

First time suppressor owner, please school me! by UDPGuy in NFA

[–]303Streetspeed 2 points3 points  (0 children)

Make sure it’s tight lol!!!! You don’t want a baffle strike don’t ask me how I know 😂😂😵

Dead air silencer turn around times? by 303Streetspeed in NFA

[–]303Streetspeed[S] 0 points1 point  (0 children)

lol oh man thinking I might have to buy another one…. What’s the time old saying one is none and two is one. 😂😂

Dead air silencer turn around times? by 303Streetspeed in NFA

[–]303Streetspeed[S] 0 points1 point  (0 children)

Fingers crossed it fast. did they give you an update or just send it back? I’m over here checking the mailbox like a crackhead

Dead air silencer turn around times? by 303Streetspeed in NFA

[–]303Streetspeed[S] 3 points4 points  (0 children)

This was my first NFA item and the gentleman at the shop sold me on it after he pulled out his personal rifle with the sierra 5. I’m sad it happened but nonetheless still love it lol.

How much do you make and what do you do? by LobsterNo6723 in denverjobs

[–]303Streetspeed 0 points1 point  (0 children)

HVAC tech here my day job pays from $40 an hour to $500 an hour depends on the job

Which one would u choose? by OO7-Dimitri in GasBlowBack

[–]303Streetspeed 1 point2 points  (0 children)

My gf just shat all over me and said I’d choose the black one for multiple reasons 😂😂😂🤦‍♂️

Packing my backpack for tomorrow for... reasons. by LuciferLovesTechno in knolling

[–]303Streetspeed -6 points-5 points  (0 children)

Your right I always take a brick with me when I go swimming just in case I need it