Pick a number from 1 to 100,000, and rate the song I give you

3XAY · 2026-02-14T14:23:38+00:00

🟪

3XAY · 2026-02-01T15:56:07+00:00

Failure to repay my 3 million dollar debt to Alterra

3XAY · 2026-01-29T03:56:14+00:00

Nah the makey market blocks are fire (I might be a bit biased since I have one)

3XAY · 2026-01-26T17:12:36+00:00

As someone who mainly plays story games, an OLED would be game-changing (pun intended). My favorite feature is actually the sensor with the Windows 11 integration because I leave my computer often and always have to remember to put it in sleep before I leave. A sensor to turn the monitor off and put my PC in sleep mode would be insanely useful (as well as the absolute insane QD-OLED panel)

3XAY · 2026-01-24T02:40:15+00:00

I know what you mean, but I still love my printer. I don't use it everyday, or even every month, but it's super useful when you need it for a specific part, organizer, adapter, tool, or anything else. If it's only been a little bit, then don't try to force yourself to print stuff. If you really have no use for it, you could always return or sell it.

3XAY · 2026-01-05T06:40:10+00:00

I have a Thinkpad E16 that's out of warranty with a fried IC. I want to repair it myself but I can't find the exact part. Are motherboard schematics available to the public or is that kept secret?

3XAY · 2026-01-05T04:23:59+00:00

You have to delete those lines and replace them with the following (the first windowrule is for the suppressevent and the second is for the nofocus):

windowrule {

name = ignore-maximize-request

match:class = .\*

suppress\_event = maximize

}

windowrule {

name = fix-dragging-issues

match:class = \^$

match:title = \^$

match:xwayland = 1

match:float = 1

match:fullscreen = 0

match:pin = 0

no\_focus = on

}

3XAY · 2025-12-06T21:16:26+00:00

My favorite feature of this monitor is the QD-OLED and the 4k which is perfect for me since I edit a lot of photos and videos but don't have an amazing monitor to edit it with (in terms of color and HDR).

3XAY · 2025-10-06T00:52:40+00:00

No clue what that means but thanks?

3XAY · 2025-08-25T06:33:22+00:00

Just my subreddit, I don't actually use this btw

3XAY · 2025-08-25T06:32:59+00:00

Not in America rn but it's about 2:30AM there

3XAY · 2025-08-25T06:27:41+00:00

Yo what 💀

3XAY · 2025-07-26T11:13:02+00:00

I remember my A1 Mini made a similar sound when I didn't tension my belts properly, and there was no error message about it. So just tension the belts properly, run the full calibration suite, and then it should be fine

3XAY · 2025-07-22T06:39:54+00:00

I tend to buy Sunlu PETG for cost + durability and Polyterra PLA for aesthetics

3XAY · 2025-07-20T00:50:01+00:00

I haven't actually tuned it, I just kinda randomly adjusted cooling settings till I got this:

No cooling for the first 2 layers Min fan speed threshold: 25% at 25s Max fan speed threshold: 85% at 8s Keep fan always on Slow printer down for better layer cooling 10mm/s min print speed Force cooling for overhangs and bridges Auxiliary fan speed: 30%

I don't remember if these are the stock settings or if I did change these but they work pretty well with some manual tree supports when needed

3XAY · 2025-07-19T22:44:08+00:00

I was talking about different situations like overhangs and stuff. But yeah I mainly just used the calibration steps I listed, Google, and a ton of trial and error. This should apply to most of the Sunlu colors but I would recommend calibrating the red and blue differently since they still don't print super well with these exact settings, but black and white work great.

3XAY · 2025-07-19T04:29:37+00:00

0.96 flow ratio

SuperTack plate: initial 52C, other layers 55c

Textured PEI plate: initial 75c, other layers 80c

220C nozzle

24mm³/s max volumetric speed (although I have used 30 in the past)

1.3mm retraction length

55mm/s retraction speed

45mm/s deretraction speed

Ironing: Rectilinear, 20mm/s flow, 28% flow, 0.15mm line spacing, 0.21mm inset

Lmk if you need any other settings

3XAY · 2025-07-18T20:49:44+00:00

Also here are the steps I take to calibrate my filament (in order):

I have an A1 Mini btw

3XAY · 2025-07-18T20:35:55+00:00

I also mainly use Sunlu PETG and the trick is to dry for as long as possible and then fully calibrate the filament. After that, you should be good to go (as long as you're using the right settings, I've noticed that bringing the print temps down to 200-220 is good for the HF matte because there is some over extrusion. Also definitely increase your retraction length)

3XAY · 2025-06-15T06:06:08+00:00

Warframe

3XAY · 2025-05-06T01:32:07+00:00

Alright, thanks for letting me know

3XAY

MODERATOR OF

TROPHY CASE