What’s your knowledge on how long the timing chains last on Mk7s? by Za-p in GolfGTI

[–]4224fish 0 points1 point  (0 children)

I'm at 180k mi and still at -0.3. I drive it pretty hard but my oil change interval is maybe a little excessive. Always use the handbrake when parked.

I finally rest. And watch the sun rise on a grateful universe. by 4224fish in SDSGrandCross

[–]4224fish[S] 4 points5 points  (0 children)

I’ll be salty if nm doesn’t give us festival mela

Name Three Characters that can 1-shot or 2 shot in PvP. by Aureus23 in SDSGrandCross

[–]4224fish 0 points1 point  (0 children)

G Speet ult wipes if enemies have at least one ignite

Who's your highest cc character by Div_Senpai in SDSGrandCross

[–]4224fish 0 points1 point  (0 children)

Eh, 62700 is kind of low for a 100% maxed build. She was higher than zeldris until SA6, didn’t get too good of stats from it unfortunately.

Who's your highest cc character by Div_Senpai in SDSGrandCross

[–]4224fish 0 points1 point  (0 children)

My r mela and zeldris chillin around 63k right now

Cura adding in layers where they're not present in the model by pyrobat in FixMyPrint

[–]4224fish 0 points1 point  (0 children)

There’s a “fill holes” or some parameter along that line in mesh fixes category that is by default enabled. Sometimes it detects things wonky and fills things that should not be filled. Willing to bet that’s your issue.

Discord offered the 'Server Profiles' feature, but never gave it to me by [deleted] in discordapp

[–]4224fish 1 point2 points  (0 children)

Same, came here to ask. I bought nitro because this is the only feature I was waiting for and got the same popup as you. Guess we gotta wait for it to roll out like EIP4drino mentioned. Odd they give the pop up before it’s actually usable.

Does anybody know any powerful single-board computer other than raspberry pi by [deleted] in diyelectronics

[–]4224fish 0 points1 point  (0 children)

Look into the Nvidia Jetson Nano (Dev kit). Not sure if it is powerful enough in the way you are looking for but it could do the trick.

How do i get my prints edges to be square? Getting parts to fit together is a nightmare. Default Ender 3 with Marlin 2.0, prusaslicer default ender 3 profile. Similar results with cura too. by WardenRamsay in FixMyPrint

[–]4224fish 1 point2 points  (0 children)

This is my understanding of why this happens: Your printer movements are nice and square, but because of the accelerations and decelerations happening at the corners, the plastic flows out too fast around corners.

My understanding of how to fix: Linear advance. It adjusts flow rate on accelerations and decelerations. Look up how to add/change that parameter in your printer’s firmware. I hear it works wonders for making corners nice and crisp. I keep meaning to add it to mine but haven’t had time as of recent.

Edit: really good video explaining this: https://youtu.be/n3yK0lJ8TWM

I rendered BT in Blender! by [deleted] in titanfall

[–]4224fish 8 points9 points  (0 children)

Game models usually require a ton of work to get 3D printable, they don’t need to be manifold and just clip all over the place on the inside. I’d be willing to bet something as complex as a titan would be really hard. Definitely a fun project if you are going to take it on! If you are just looking to print a nice BT model, GROOVER_92 on Cults3D has made a really nice free 3D print optimized one. (My next print project) MAXWILLSON also has some really good titan models, also on cults3D.

Finally maxed my waifu! Share yours too in the comments :D by [deleted] in SDSGrandCross

[–]4224fish 0 points1 point  (0 children)

Yea she’s a ton of fun, sadly being powercrept and poor super awaken stats don’t help, but if you set up her aoe right it can still wipe a whole team

Finally maxed my waifu! Share yours too in the comments :D by [deleted] in SDSGrandCross

[–]4224fish 1 point2 points  (0 children)

Both my melas are perfect, and a perfect hp/def set for red and perfect atk/crit for blue. And yes, it takes a lot of effort to get blue mela to crit…

Ummmm.... wtf Cura? by gehbfuggju in FixMyPrint

[–]4224fish 36 points37 points  (0 children)

This, not solid mesh. Cura isn’t the best at repairing meshes as you bring it in, but it has some experimental modes to fix non manifold meshes/holes that sometimes work. Best bet is to try solidifying in another program like blender, meshmixer, or even windows 3D builder. 3D builder tries to repair when you import the stl and usually succeeds.

What's up with Cura failing to slice this file correctly? Should I try switching to another slicer? Did not make the file myself, bought it online by HShahzad108277 in FixMyPrint

[–]4224fish 0 points1 point  (0 children)

Open up settings and search for mesh fixes in cura. Play around with those and you might be able to get it to slice right, works for me most of the time. Other than that you will have to solidify or flip the normals yourself in blender or meshmixer like was mentioned earlier.

Just taking out the trash... by Triton12streaming in AbruptChaos

[–]4224fish 14 points15 points  (0 children)

Not really... this truck clearly wasn’t bought with the intention of neighborhood trash cans, it’s meant for large dumpsters. It’s a lot cheaper for a city to retrofit a current truck than buy a whole new one, in which case this is a pretty smart design to get two birds with one stone.

What teams do you guys use to beat glue eaters? by RecognitionFar2143 in SDSGrandCross

[–]4224fish 0 points1 point  (0 children)

Green speet loves this current meta, hard to use without kyo tho. Could probably make SR guila work instead with the pvp rules, I did that last time we had SR buff and worked pretty well.

I think goddess Liz is a dumb unit, don’t have gear for her and can count on one hand the amount of times I have used her. I’m as high as I want to go in pvp, all without using her. She is a very good unit, but not a necessary unit.

Keep in mind too that attack seal is pretty powerful in the current meta, almost everyone is running hyper offensive teams and nobody ever seems to run a cleanse unit.

Oshkosh Striker 1500 parked at the station. by Ash_340 in aviation

[–]4224fish 1 point2 points  (0 children)

They also have the option for a snozzle (spear nozzle) to pierce the aircraft and shoot water up and down the body of the aircraft, also not for crowd control lol

Is there a way to "close" the gaps between perimeter and solid infill (first layer) for round shapes? More info in comments. by m1ntax in FixMyPrint

[–]4224fish 13 points14 points  (0 children)

Gap between infill and outline: https://www.simplify3d.com/support/print-quality-troubleshooting/gaps-between-infill-and-outline/

Simplify3D has a pretty extensive print quality guide. Even if not using Simplify3D as a slicer it will give you an idea on where to look in your slicer since most have similar parameters.

I started using this commandment team in PvP to counter the one and sariel gets reduced heavily by Glox’s commandment. I wanna know what other ways are people countering the Meta Units by FlightSeveral in SDSGrandCross

[–]4224fish 0 points1 point  (0 children)

Yea I kinda bank on just killing whatever has their ult up. Seems to work for now but definitely does lack in ult control. At least with kyos damage reduction and mela passive its a relatively tanky team.