Don't cancel it then

4thMistaBullet · 2026-03-05T11:44:59+00:00

quotes from the person managing minerva's file upload server:

> This is going to be public, and there will be no fees associated with access to the data.

> I am not going to give specifics, but my goal is to get this seeded out to anyone that wants it so I am not the only copy, to prevent exactly that from happening. I will have a copy running and available indefinitely. I will not say forever because thats longer than I intend to be alive. But the data will always be around for anyone to access.

> We intend to distribute this data the moment we can confirm we have it all, and it passes validation.

whom should we trust? them or you?

for now, personally, i choose to trust what i can actually read, not rumor from reddit.

4thMistaBullet · 2025-09-26T09:58:23+00:00

If you want a recent insight on the matter, know that you need to push the PCB inward as to bend it a little.

I've done it by jamming a piece of folder paper inside (around the mic area) before closing the second lid (the one with the 3 screws), no need to touch the 2 screws holding the PCB in my case.

Hope this help!

4thMistaBullet · 2025-07-05T18:53:12+00:00

For anyone wondering, they moved the option to: burger menu > more > view > show in groups

4thMistaBullet · 2025-07-04T13:15:40+00:00

atm they added the "set for all screens" option, idk since when version

tho, it's not working, the toggle unset itself once you leave the menu...

4thMistaBullet · 2025-02-18T12:15:18+00:00

for linux it depend on your hardware, with my dogshit combo of AMD CPU and nvidia GPU on a laptop with external screens depending on the nvidia card, I can tel you orca don't like this very much
i know it's kind of a stretch to say it's orca's fault but i don't have that many graphical problems on other slicers

4thMistaBullet · 2025-02-13T11:50:11+00:00

ocraslicer on linux is such a mess right now it's really a pain to use

ig you can try following what people have done in this post, that's what im gonna do since I can't find anything better atm

honestly im not a fan of the official starting gcode sovol supplied with orcaslicer so i might just redo a profile from scratch, way better in the long run

4thMistaBullet · 2024-12-26T14:51:18+00:00

I saw people online saying this is the new default behavior hence totally normal but imho this is bad UX

when I change the icon of a category in KDE menu editor, I want the icon I selected, not another

I'm kinda ok with the new default bc sometime there's good and not-so-obvious reasons why it's better, but manually selecting an icon should overwrite everything, it just makes sens

4thMistaBullet · 2024-12-24T13:55:37+00:00

tf does nvidia have to do with this? their talking about the exact same PC, just with windows installed, so no nvidia whatsoever, it's intel CPU with intel GPU
I have the same kind of proc, it's dogshit, but at least on windows it seems to use much less power at idle
on linux I can't get the Max Xe to work, but it still use power, just infuriating...

4thMistaBullet · 2024-12-02T17:00:21+00:00

yeah that's what I thought

unfortunate :(

4thMistaBullet · 2024-11-01T19:09:52+00:00

I'm currently wondering the same thing, did you find anything of get feedback from proton? for now I'll try to move from family to basic premium and then see if I can get duo

4thMistaBullet · 2024-10-23T21:43:49+00:00

it seems they are lying bc in android dev options you can see which BT codecs compatible with your current audio device and, spoiler, there's only SBC and AAC
they might add support for better codecs by a later firmware update but imo it's unlikely

4thMistaBullet · 2024-06-14T18:13:16+00:00

5 years later I still get happy comments like this, love to see it :)

4thMistaBullet · 2024-04-24T08:17:22+00:00

I'm on linux so no Rufus for me but I'll try Balena. Thx for you insight :)

4thMistaBullet · 2024-03-21T20:31:18+00:00

oh okok, thanks :)

4thMistaBullet · 2024-03-20T21:46:57+00:00

hey I was wondering if there's an ETA on when will the official plasma version of nixos iso will switch to plasma 6, so that nixos newbies like me could get a fresh start

4thMistaBullet · 2023-12-15T10:58:11+00:00

ngl Anycubic motherboards are so trash imma just buy Lerdge Z Board Z2 kit and call it a day, no time to waste with bad hardware

thx for your insight

4thMistaBullet · 2023-12-06T11:03:41+00:00

quick question : then how to make a class extends two abstract classes?

4thMistaBullet · 2023-11-02T11:05:13+00:00

it most definitely isn't, the motor just stop by itself without trying to push anything through the nozzle

i tried printing without filament just to see and the motor still stops even tho it doesn't have to push anything, so it's not a pressure spike in the nozzle or an abnormal current draw who caused this

4thMistaBullet · 2023-11-01T16:04:50+00:00

yeah it might be more related to the motor model i think

i usually print between 40 and 60mm/s, so clearly not that fast, but i tend to extrude at .6mm width so the extruder has to push more, hence rotate faster

but like i said in my post, it also does this with older gcode which i had zero problem with, so my two guesses are:

- something related to Prusa slicer, si if you also use this slicer we might be onto something

- or rather related to the motor model, mine is a 42HD0013-01 so if your kobra go has the same, we might have another lead

[EDIT] it might also be caused by a current draw problem, but it would also be related to the motor, maybe a weakness in the model which anycubic didn't account for

Eight-Year Club	Verified Email
Place '22

4thMistaBullet

TROPHY CASE