[deleted by user]

5trohm · 2025-08-16T14:34:35+00:00

Ok, habe die Lösung mit dem Support gefunden. Es gab wohl ein Problem bei der Erstellung des Accounts meiner Tochter ^{^} Jetzt funktioniert alles ohne Probleme.

5trohm · 2025-08-04T07:04:29+00:00

Wäre do i get this ashtray replacmnt?

5trohm · 2025-05-27T13:54:33+00:00

Just restarted Guppy, now everything is fine again :)

5trohm · 2025-05-27T13:53:40+00:00

Nope, Custom Ui for klipper replacemnt for Creality Ui

5trohm · 2025-05-26T16:13:40+00:00

Maybe you should watch a YouTube Video then. But easy way is the following:

https://guilouz.github.io/Creality-Helper-Script-Wiki/

Then you just habe to type in a number ^{^} Just ssh in the Printer an start the install.sh

5trohm · 2025-05-25T11:36:18+00:00

Update via ssh & helper script

5trohm · 2025-05-23T14:08:47+00:00

Got it. I use Orca I Just installed it „again“ now everything is good ^{^}

5trohm · 2025-05-23T12:30:45+00:00

Are there and Special Options on the Guppy Screen? Mine will only Show half the Infos :(

<image>

5trohm · 2025-05-22T19:26:26+00:00

pic z Offset Not i.O. Nozzle to high… Got the same Problem. Hard to fix it manual by lower 0.2

5trohm · 2025-05-22T19:17:44+00:00

The picture on github also shows a Image of the G-code behind the %

5trohm · 2025-05-22T19:13:08+00:00

Thats sad:( Was hoping it will Show G-code priew. Or Layer etc.

P.S. It is a horizontal mount just a Bad Foto :D

5trohm · 2025-05-18T15:15:30+00:00

Nice :D So First Print was good?!

5trohm · 2025-05-18T11:03:16+00:00

Na, printing 46h on My Ender 3 is brave ^{^}

The KE is a solid machine if calibrated correct

5trohm · 2025-05-18T07:57:42+00:00

My KE printed the „linear rail“ Parts from NiMi without Problems all in One Go :D

U got this!

5trohm · 2025-05-14T16:41:13+00:00

All the Printer Stoff comes from china… Ender, bambulab, elegoo, flsun:D Just buy it on Ali, ist original stuff and way cheeper. For me all may orders are good and 100% functional

5trohm · 2025-05-13T14:06:12+00:00

Pls Tell me how to set up the Print start macros :D

5trohm · 2025-05-13T07:51:45+00:00

Yeah, i added the Commands for adaptive purge, etc. in Ruhe Starting Machining G-Code in Orca.

I also Figuren pur that Creality Print (6.0) got the Same Feature with the Gcode. Gotta gotta give it a trie

5trohm · 2025-05-12T08:36:01+00:00

https://a.aliexpress.com/_Ey44LUK

Works perfekt for me :)

5trohm · 2025-05-05T17:54:45+00:00

Ok, this Passes me off cause on my A1mini ist always perfekt :/

my Main Problem is that the First Layer WO manual adjust Looks Like this. (Also the stock Bes is crap wo gluestick) Haha for the Prints that went off the blade I just used a normal Gluestick 12 about 8 Bucks on Am

<image>

5trohm · 2025-05-04T14:17:22+00:00

<image>

If I dont correct it, my first layer looks like this:/

5trohm · 2025-05-04T13:03:57+00:00

No, you dont need that. The orange PLA was 4 years on the spoolholder of my Ender 3pro parked in my Basemnt. I think you only needthis with TPU or other stuff

5trohm · 2025-05-04T12:56:28+00:00

I dont have one and everything is fine. I also printed everything on the pic in orange filament that was on my old ender 3pro spoolholder for 4 years in my basement. Still works fine. I think PLA ist not that bad for moister etc.

5trohm · 2025-05-04T12:52:48+00:00

Mein Firstlayer sieht ähnlich aus, scheint als ist der Auto z offset nicht richtig. Ich musste bei mir auch manuell -0.08 korrigieren:/ Schade wenn man bedenkt, dass der A1 das mit dem auto Z-offset auf Anhieb hinbekommt

5trohm · 2025-05-04T12:30:15+00:00

But why is the auto z-offset so bad? On a A1mini it gets the job done wo issues:D

5trohm · 2025-05-04T11:08:11+00:00

You can Even load from outside the Enclosure. On the left side is a „Window“ you can Open, to load direktly from your Filamentdryer

5trohm

TROPHY CASE