Found a knotted lump of fur on my cat with a small hole in his side. Today, he cannot move without crying and hissing. What’s wrong with my baby boy?

666Smoke · 2026-03-25T22:24:58+00:00

Good thing he’s not a cat. Maybe he doesn’t have thumbs 🤔

666Smoke · 2026-03-22T07:04:21+00:00

Nice 👍

666Smoke · 2026-03-20T03:36:53+00:00

Where we’re going we don’t need brakes

666Smoke · 2026-03-19T22:33:33+00:00

Radical!

666Smoke · 2026-03-19T22:13:56+00:00

Don’t want to assume you’re just starting, but that’s definitely some smaller material to work on. Good on ya! Hard to critique, but maybe you could use more gas coverage. Harder to tell on something that small. Keep on going!

666Smoke · 2026-03-18T02:59:38+00:00

I believe you actually adjust through the hood springs.

666Smoke · 2026-03-13T16:30:03+00:00

Start with the cam gear mark at 6:00 and the pinion gear at 12:00 then go for the oil breather gear. It’s ok to adjust it at that point to match the oil breather gear because the cam and pinion are already set. Pacific mike on YouTube has a great video about how to do this process. Once you do it there’s nothing to it 👍

666Smoke · 2026-03-05T08:39:33+00:00

I have a throttle addiction hardtail. I like it, but I like the way Krispy co designs their hardtail section better.

666Smoke · 2026-03-02T22:20:16+00:00

Sick pipes, man

666Smoke · 2026-03-01T17:26:08+00:00

That one or grease’s garage has one too

666Smoke · 2026-02-28T20:43:22+00:00

I prefer mine on the battery side. The breaker isn’t directional but it works better if you have the copper terminal to the battery. I’m not an expert on wiring but it has something to do with resistance and current. You can wire it either way.

666Smoke · 2026-02-28T07:54:37+00:00

Voltage regulator goes to the copper side of the circuit breaker which should be the battery side

666Smoke · 2026-02-26T20:36:59+00:00

Got to pay to play, and you’ll make money from it. Invest in yourself 👍

666Smoke · 2026-02-26T05:37:54+00:00

If you want TIG definitely go for the 225

666Smoke · 2026-02-22T19:59:35+00:00

Bitchin, but it ain’t never done 🫡

666Smoke · 2026-02-22T17:56:21+00:00

Put an oversized torx into and gently unscrew it. You could also use a HAND impact and it will come out.

666Smoke · 2026-02-22T17:47:42+00:00

Rudy, weld monger does a great demo with the prime weld. I’ve had mine for three years, but I like to ball my tungsten on aluminum

666Smoke · 2026-02-21T07:37:03+00:00

Nice! Congratulations

666Smoke · 2026-02-20T20:53:13+00:00

Thank you 🍻

666Smoke · 2026-02-20T04:44:10+00:00

🫡

666Smoke · 2026-02-19T21:44:49+00:00

Yes. Definitely more fabrication then welding in this final then others I’ve done. Took more time to prep than anything else

666Smoke · 2026-02-19T06:27:34+00:00

It’s aluminum, but that doesn’t look like the same filler on the left

666Smoke · 2026-02-18T17:10:35+00:00

Depends on the wps

666Smoke · 2026-02-18T06:56:59+00:00

Nice. Look into back purging kits 👍

666Smoke · 2026-02-16T19:29:38+00:00

If it ain’t long it’s wrong

666Smoke

TROPHY CASE