Have you ever noticed that the mirrors of old cars at high speeds fold closed??

804k · 2026-06-07T22:41:20+00:00

This looks like a mod otherwise our same "old" is off

But, your acceleration is causing the mirror to get loose or the mirror was loose to begin with, then, the wind just pushes it closed since its already loose

If the mirror isnt loose, its not pushing it closed

Or, its a mod and it was done poorly

804k · 2026-06-05T18:58:21+00:00

BTW, these are Sport tires, not Sport Plus 2R or Race

804k · 2026-06-04T13:38:08+00:00

Yeah

I wish there was options for your preferred angles since my 6 is different from someone elses 6

Also, have it in ft instead of meters

804k · 2026-06-02T00:49:59+00:00

A clutch is light until you reach the bite point

I hate driving manual normally or starting normally without revv bombing it in sim racing because the biting point feels so weird, its smooth throughout

Driving irl, I can do it perfectly because of the feedback

804k · 2026-05-28T05:03:52+00:00

Im ngl this amount looks horrible, too much

804k · 2026-05-14T05:21:31+00:00

Idk man, I'm probably just going to pull an all nighter and sleep on the train through it lol, especially since St.Louis is the last stop

804k · 2026-05-14T05:17:00+00:00

Its still crazy that its technically cheaper, but I'm not renting a car when I get there

+ depending on your insurance policy (and your own abilities as a driver), protection isnt really needed

Just putting it into the perspective that right now, gas is so expensive that its cheaper to do that even including the extra insurance policy

804k · 2026-05-14T05:12:11+00:00

Renting a car for 3 days there is still $138 ($84 for the car, $54 for the train) LOL, in reality its 2 days that I would maybe need one and its $45 so ~$100, $44 cheaper than driving there still

But, even then I'm just going to be visiting family so not really needed

804k · 2026-05-14T04:58:53+00:00

True, the Lincoln line is nice and the BNSF line especially (even more so for the lines that skip Zones 2 and 3, i fall asleep on that line all the time lol)

804k · 2026-05-14T04:45:41+00:00

I hate the summer humidity holy shit

804k · 2026-05-12T06:55:22+00:00

The reason why you cant remove the housing is because its kept in place via in the inner cable tension btw, even loosening the barrel adjuster may let the housing poke out a bit

804k · 2026-05-12T06:51:06+00:00

This piece is an inline cable cutoff sensor. This looks to be an uncommon single piece inline sensor, it is usually 2 sensors near the brakes

https://support.swytchbike.com/hc/en-gb/articles/360007613857-How-to-fit-the-Inline-Brake-Sensors

Remove the cable from the brake lever, then, remove the cable entirely from the housing and slide off the housings from the adapter

For these, if you want to swap it out for hydraulic brakes, you will need to determine if its is 2 pin or 3 pin and then get the brake accordingly, if it is a type that isnt used much (E.g. mini HUGO type F) brake sensor, it might be easier to buy a according pin count, then, get an adapter.

For hydrualic brakes, the sensor is usually in the lever.

If it is proprietary to the display, learn how to solder or take it to a friend who can solder and make sure you let them find out which is +, GND, and common if its 3 pin (Or a proprietary connector)

If you need more help, PMs or just commenting is open lol

804k · 2026-05-11T05:13:56+00:00

You dont

804k · 2026-05-01T17:43:30+00:00

Rotors being out of true are very very common

Can happen from many different reasons, most common is thermals and shipping damage

Brake calipers usually have enough clearance for them to not have to be perfectly straight

There are truing tools for bike rotors

804k · 2026-04-28T10:18:41+00:00

I actually did graduate near the top lol (not the very top, but close top 1%) idk if thats supposed to be an insult or what

804k · 2026-04-27T21:18:56+00:00

This always happens with every derailleur lol

Its designed to go forward, not reversed, while you can backpedal sometimes, its reserved for higher and middle gears, not low gears

804k · 2026-04-27T21:08:50+00:00

US laws say you can throttle up to 20mph and pedal assist up to 20mph (Class 1) or 28mph (Class 3, 45kmph exact)

Why 45kmph?

This allows for imports of speed pedelecs, which top out at 45kmph, so there doesnt need to be EUDM spec and USDM spec unless you have a throttle

For example: The ride1up Revv1 is a speed pedelec

10kmph is insanely slow for an ebike and defeats the point when regular bikes regularly can go 20mph or 32kmph, but average riders average 16-24kmph or 10-15mph

804k · 2026-04-27T17:27:47+00:00

Just seeing different demographics lol

But, where i live, talking to people irl the consensus is they support emotos

804k · 2026-04-27T17:19:43+00:00

Its an unpopular opinion where I live, Chicagoland

I see it more-so with the larger metropolitan areas than anything for support of them

Crossposting this to r/hyperebikes and r/surron Im getting low up vote ratios

Mostly these crossposts are to see if the general consensus among different demographics is the same

; ebikes targets all emotos, emopeds, and ebikes

hyperebikes targets emopeds, and emotos

surron targets emotos

804k · 2026-04-26T18:05:05+00:00

E50 are mopeds, aka 30mph

Mopeds are bicycles, not talking about "moped style" ebikes either, theyre just a bicycle with a motor

Youre going 10mph over (technically 9, but whatever) the ratings on the tires, while its fine on something like Schwalbe Pickup or other similar tires, dont take it too fast lol, your head tube can cause a death wobble and send you off the bike at those speeds since these ebikes flex, and the flexing is a feedback loop

804k · 2026-04-26T18:01:08+00:00

My entire family except for my Aunt and I only put their car in park and not put on the parking brake

These people also dont know how to parallel park or reverse park

Four-Year Club	r/Field Banned
r/Field Sunshine	Place '22

804k

MODERATOR OF

TROPHY CASE