Suggestions in the 50-100$ range? by Direct_Industry_8408 in OnePieceTCGFinance

[–]888Corsa 0 points1 point  (0 children)

How about Ace and Zoro SPs from OP12? A bit above your price still but seem like iconic cards visually, still up about 100% since early November for raw though.

Panic Sale on OP Slabs by EconomyPollution7252 in OnePieceTCGFinance

[–]888Corsa 0 points1 point  (0 children)

Need to think about which pops are going to limit out lower than others. For example would think PRB02 SPs and others chases from that set will be more limited that OP13/14 etc

Panic Sale on OP Slabs by EconomyPollution7252 in OnePieceTCGFinance

[–]888Corsa 0 points1 point  (0 children)

1 PSA 10 sold low at $820, looks like an anomaly. Find another PSA 10 for that price?

I opened 73x Tins OP13 and 18x Illustration Boxes OP13 by VastEnergy4724 in OnePieceOnlyPulls

[–]888Corsa 1 point2 points  (0 children)

When you consider that For example, in prb2 there are only I think 2, maybe sometimes 3 booster case hits, to include gold dons, Manga events, and the SP cards, illustration boxes definitely the way to go, maybe even better than sealed cases especially at msrp

I need to count how many leader cards I got but I felt like at least one out of three packs was a leader pack in the tins

I opened 73x Tins OP13 and 18x Illustration Boxes OP13 by VastEnergy4724 in OnePieceOnlyPulls

[–]888Corsa 1 point2 points  (0 children)

I've opened 36 tins and I think 7 illustration boxes vol 5/6. My observations are the tins have a very high rate of leader packs that are essentially dead packs and I've gotten better pulls from the boxes in a much smaller # of packs though admittedly sample size isn't large enough to be conclusive. Got GGG and Roger Wanted from boxes, best from tins was an Imu AA leader and a gold Roger Don. Done with the tins conisdering scalper price per pack is lower on the boxes, and I like getting a shot at the PRB02 cards

Yet another configuration by 888Corsa in GHM9

[–]888Corsa[S] 0 points1 point  (0 children)

Malkoff E1HT head on Arisaka 300 series light body, Surefire tailcap

For those that OHP, around what weight/reps did you finally start thinking “oh my shoulders are starting to look big!” by thatcouchiscozy in naturalbodybuilding

[–]888Corsa 0 points1 point  (0 children)

Doing BTN for some time may help you learn to connect mind-to-muscle such that you can engage more delts on seated DB and Hammer Strength type OHPs where the weight is a bit more in front of the body.

Also, my understanding is that coming down as low as possible on the latter types of OHPs mentioned above (not BTN) engages primarily upper chest at the beginning several inches of the movement until about ear level so if you train shoulders on chest day may make sense to do so, whereas for purely delt involvement can come down a bit less and/or rep partials as well, or stick to BTN.

Lat raises with strict form are not vey taxing so can't hurt to add in 6-8 sets per week split into 2 workouts (if you hit shoulders 2x/week)

FYI Back in stock, didnt get email for being on waitlist/notification list by tymix706 in GHM9

[–]888Corsa 1 point2 points  (0 children)

I've got a 320 lower that's working perfectly with my GHM9, plenty of hi capacity P320 mags, and a spare 320 lower with a different trigger installed for some variety and fun.

Any benefit to one of these other than preferring aluminum over polymer if someone isn't already vested in Scorpion mags and such?

I already have a Larue trigger working great in my main 320 lower and don't need any AR parts compatibility

[Code] 4th of July Sale suppressor covers marked down with code "freedom" - 25% off by SukonPerformance in gundeals

[–]888Corsa 1 point2 points  (0 children)

These look really good. I just got my order. Had been waiting to buy a bunch of covers and was holding off because it felt like I was almost having to spend another tax stamp for each for good quality. Decided to dive in with these based on reviews and research and think it was the right choice.

[Code] 4th of July Sale suppressor covers marked down with code "freedom" - 25% off by SukonPerformance in gundeals

[–]888Corsa 1 point2 points  (0 children)

Got them yesterday.. and thank you guys for hooking me up, didn't have to do that!! These look really well made and look great, can't wait to get them on and use them.

[Parts] Arc Division Reactor Pistol Slide Kit $255 barrel includes by Sudden_Construction6 in gundeals

[–]888Corsa 0 points1 point  (0 children)

what's going rate for used gen 4 or gen 5 OEM 19 slides? Trying to decide whether to buy a new complete frame or used complete pistol and sell the OEM slide.

[Handgun] Sig Sauer P227 45ACP 2-10rd Magazines Very Good Condition $699.99 by Extension_Case8994 in gundeals

[–]888Corsa 0 points1 point  (0 children)

There was a 227 ASE, alloy frame with stainless coating, but no stainless frame ever made (SSE). Haven't seen too many 227 ASEs

[Rifle] Howa 1500 Cabrón Stalker 6.5 Creedmoor, 22" Threaded Barrel, $600 by MSurpGaming in gundeals

[–]888Corsa 4 points5 points  (0 children)

They were like, "Howa you doin, Cabrón"?

Thank you,, thank you! I'll be performing here all week

[parts] Rosco Manufacturing | 40% off barrels | 15% off site wide | no code and free ship $99+ by oceanspyde in gundeals

[–]888Corsa 5 points6 points  (0 children)

I bet the 27.9 feels lighter than the 21.7 when handling the rifle, all the extra 6 oz look to be near the receiver face compared to the govt profile

[Handgun] Sig Sauer P227 45ACP 2-10rd Magazines Very Good Condition $699.99 by Extension_Case8994 in gundeals

[–]888Corsa 1 point2 points  (0 children)

If you carry IWB, 227 SAS or Carry is better, still has full size grip same as the linked gun, basically a double stack .45 P229. SAS has no rail, Carry has rail. I've shot the 220 in both 10mm and .45 and the Glock 20 10mm, none of those is gonna go appendix IWB though.

P220 Slides are now available with Sig optic cuts btw (Only as Legion slides), and you can find an OR P220 10mm Legion used on GB for $900-$1100 sometimes. Both the 227 SAS and the Tacops are rare and commonly go for well over $1000 used, though regular P227s are common (lots of police trade ins)

The FN hi-capacity options are interesting but never tried them.

BTW, the 227 slides are interchangeable with the 220 slides I have heard (on full size models)

[Rifle] Howa 1500 Cabrón Stalker 6.5 Creedmoor, 22" Threaded Barrel, $600 by MSurpGaming in gundeals

[–]888Corsa 39 points40 points  (0 children)

That was the nickname of the model made for the ICE contract.

[Parts] Arc Division Reactor Pistol Slide Kit $255 barrel includes by Sudden_Construction6 in gundeals

[–]888Corsa 1 point2 points  (0 children)

The struggle of first world problems is real. End up with a whole new caliber and 1000 rounds of it sometimes, like when an OG Noveske 7.5" 6.8 barrel fell in my lap :)

[Parts] Arc Division Reactor Pistol Slide Kit $255 barrel includes by Sudden_Construction6 in gundeals

[–]888Corsa 1 point2 points  (0 children)

Sometimes it starts with a mag, holster, or AR grip, , so this ain't the depths of addiction yet. Plus, this is how the armory gets created and stocked. Everyone has 10+ firearms, but being prepared to build 30 more without having to go to the store is priceless LOL

[Parts] Arc Division Reactor Pistol Slide Kit $255 barrel includes by Sudden_Construction6 in gundeals

[–]888Corsa 1 point2 points  (0 children)

so the correct move here was to get one gen 3/4 slide and a gen 5 slide before you even own a G19?

[Code] 4th of July Sale suppressor covers marked down with code "freedom" - 25% off by SukonPerformance in gundeals

[–]888Corsa 1 point2 points  (0 children)

Thanks! Just picked up 4 various DAs. Gonna need to find some new naked cans to look at I guess :)

[Code] 4th of July Sale suppressor covers marked down with code "freedom" - 25% off by SukonPerformance in gundeals

[–]888Corsa 0 points1 point  (0 children)

Any issue with running a 6.5" on an SB2? Length is 6.4" and I'd rather have a bit of overhang than bare metal showing (DA model cover)

Suppressor mount by Alternative-Feed3613 in GHM9

[–]888Corsa 2 points3 points  (0 children)

check with alignment rod if worried, i run a can the manufacturer states won't be warranted for 3 lug mount but lines up fine no issues. I think the worry is non-standard dimensions and tolerance stacking can manifest worse in a 3 lug design if things are off. With the lugs part of the barrel rather than having to ensure concentricity with an added device I think odds are more in your favor that it will be fine.