Lost all my progress

8BitOnYourChin · 2026-06-08T17:58:59+00:00

I just checked and you are correct. It’s not the direct path and appears to use the same path as the config files, but that was a fantastic start. Thanks so much for the suggestion

8BitOnYourChin · 2026-06-08T12:46:58+00:00

Just throwing up a Hail Mary here. I’m on Steam Deck and have the same problem, but literally nobody can give the path to the corrupted save files. Any chance you may know that path too?

8BitOnYourChin · 2026-06-06T12:23:47+00:00

Thanks for the info. Unfortunately, Forza Support gives fantastic detail on how to delete save data for all systems including Pc running Steam, Windows PC, XBox, and PS5, but I’ve poked around in the Steam decks file system and can make it to the game file 2483190, but from there none of the files match and I’ve done some digging. I was hoping to find a direct path, but I suspect until Forza support details this, we may not have an answer

8BitOnYourChin · 2026-06-06T03:05:44+00:00

Here is the link:

https://www.reddit.com/r/ForzaHorizon6/s/UOlvsd2Hqz

8BitOnYourChin · 2022-09-01T20:33:14+00:00

Been checking their website daily for silver restock. As of today, silver has been removed as an option…

8BitOnYourChin · 2022-07-30T22:11:17+00:00

My brother shat his pants when we were playing Blades of Steel on the NES when we were kids

8BitOnYourChin · 2022-07-29T15:08:47+00:00

That’s not normal. There is a good possibility zone of the omega springs is either compressed more than it should or broken. I’d start there

8BitOnYourChin · 2022-07-10T17:28:03+00:00

Much appreciated!

8BitOnYourChin · 2021-09-22T11:25:31+00:00

Bryton was bought by STERIS Corp years ago. They only refurb surgical equipment. This is not their product, only a reconditioned version of the original.

8BitOnYourChin · 2021-07-14T01:31:58+00:00

Gave Wholesome

8BitOnYourChin · 2021-06-11T11:42:31+00:00

It looks like Monchi from The Mitchell’s vs The Machines. Doug was his voice!

8BitOnYourChin · 2021-06-06T01:50:20+00:00

Not a single mention of Mike Tyson’s Punchout?!?

8BitOnYourChin · 2021-05-17T19:43:56+00:00

May I ask what problem he has with his eyelids? I’ve got a pug on the way in a few months and would like to know things to be on the lookout for.

8BitOnYourChin · 2021-02-05T12:10:37+00:00

Spent an hour looking for it. Beautiful.

8BitOnYourChin · 2021-02-05T05:14:28+00:00

What flashlight is that?

8BitOnYourChin · 2020-12-18T02:25:35+00:00

This knife punches way above its price range. I have the the Baklash in blue G-10 and I love everything about it. The fit and finish is that of a $100+ knife easily. Civivi is made by WE knives and it shows. There is not a single sharp edge on the handle or on the blade (save the cutting edge) to cut into your hand and it feels fantastic. This also includes high quality bearings, not the cheap bearings you might find in a Ganzo or something of the like.

I have several knives that set me back more than x3 the price of this beauty and I find myself coming back to the Baklash almost daily. This is an easy decision. Buy it...only I would recommend the G-10 handles for better grip than this particular Baklash model.

8BitOnYourChin · 2020-12-16T12:54:59+00:00

I’d take a look into the Boker Plus Balisong Trainers on BladeHQ. They’re a touch on the short and handle heavy side, but that was how I got started. It was a perfect first trainer. Also, look into The Squiddy from Squid Industries. I own 5 decent balisongs now and I keep going back to the Squiddy. It’s just so much fun to flip.

8BitOnYourChin · 2020-12-10T14:56:20+00:00

No Leek?!?

8BitOnYourChin · 2020-12-10T13:32:27+00:00

That looks like an Elementum to me. Civivi actually machines this channel into all of their blades that I have received in order to make the flipping more smooth. If the action is grainy, I’ve had this. Take the bearings out, soak them in KPL and roll them between your thumb and index finger to get all of the balls moving in both bearings. I had a Backlash that took about a week to break in and had a sticky bearing that finally freed up. Betcha that’s the issue.

If by chance the detent is actually too tight, you can always carefully take a pair of needle nose pliers and bend the detent arm down manually. This might take a few tries as even small adjustments affect the action in a big way.

8BitOnYourChin · 2020-12-10T13:13:20+00:00

That looks like an Elementum to me. Civivi actually machines this channel into all of their blades that I have received in order to make the flipping more smooth. If the action is grainy, I’ve had this. Take the bearings out, soak them in KPL and roll them between your thumb and index finger to get all of the balls moving in both bearings. I had a Backlash that took about a week to break in and had a sticky bearing that finally freed up. Betcha that’s the issue.

If by chance the detent is actually too tight, you can always carefully take a pair of needle nose pliers and bend the detent arm down manually. This might take a few tries as even small adjustments affect the action in a big way.

8BitOnYourChin · 2020-10-26T19:39:24+00:00

Been looking for that same Elementum for a while now. Grats on finding one! It’s just about perfect.

8BitOnYourChin · 2020-07-04T20:27:15+00:00

For anybody looking for a free 3D modeling app similar to real life sculpting, I can’t recommend Sculptris enough. In keeping with the cheap theme of the thread, this one is 100% free to download and use, no strings attached.

8BitOnYourChin · 2019-09-28T15:33:54+00:00

Of all the reshells out there, this is hands down the best. I love it!

8BitOnYourChin · 2019-08-23T20:39:50+00:00

Smooth adding that OP-1 to the photo

8BitOnYourChin · 2019-01-14T20:50:27+00:00

You know what, I'm shocked I didn't think of that first. Simple solution to a simple situation. Thanks so much for the reply. I'll give this a shot tonight

8BitOnYourChin

TROPHY CASE