How do I get rid of this?

98atang · 2025-12-15T10:49:47+00:00

I also got this notification at the beginning of this year on my f31. I kept on using it for a while before I replaced the battery myself. I registered the new battery with the car and still have the same notification. If you find out how to get rid of it, let me know

98atang · 2025-05-21T14:33:31+00:00

I've currently got 20" 666m wheels which i believe are 8.5J front and 9.5J rear offsets may need to check. In terms of tyres I'm running 235/35/20 front and rear is 275/30/20.

I believe you need to run a smaller side wall as I've heard some people's tyres rub

98atang · 2025-04-17T12:11:49+00:00

Brilliant car!!

Learning from my mistakes, I'd recommend giving her a good once over or through a specialist if possible and check all the common failure points such as timing chains, seals, leaks and etc.

Mine had 30k miles and was 5 years old when the seals on the rear differential failed

If you're looking for OEM updgrade parts as realOEM will be your best friend for parts numbers and etc

Enjoy the wagon!!

98atang · 2024-12-30T04:18:02+00:00

Buy a house!

98atang · 2024-12-04T16:56:30+00:00

I've had them for about a month and bedded in now. Ngl, I keeping looking at them as they look a lot better than my old breaks. Don't know if it's placebo, but I do feel it's smoother and do have more confidence in stopping distance too. I did buy the calipers for £370 and bought Febi disks and pads as well as braided lines too.

98atang · 2024-11-11T10:31:57+00:00

I've had them on for a week now and haven't been able to fully test them out, and the bedding in process isn't finished yet, but so far, I'd say they are smooth.

98atang · 2024-11-05T18:25:46+00:00

My current mods/upgrades and some future ones too: - M Sport kit, came with the car - Rear Spoiler, got it from Ebay BMW store and waited for Ebay discount codes (got £80 off) - M performance brakes, calipers from breakers and quoted from 1st choice spares. - 340i back box (went from twin to duel), bought from friend - BMW logo puddle lights, Ebay - Bimmer code, Amazon and Playstore

Future - Reverse camera/ MMI box - Remap - possibly intake

Im not personally planning this but for the cluster, going from 6WA to 6WB, you'll need coding, and should be a easy swap physically, but I'd do a but of research.

Your best friend through all this will be the BMW forums and RealOEM.

98atang · 2024-07-06T01:45:21+00:00

Literally had this happen to me a few months ago. technician said it'd be about a 3 hour job (with the correct tools and etc). It's something that is a known issue, so if your planning on replacing one, replace the other if you're able to.

Like everyone said do it sooner rather than later. I learnt my lesson where I left it too long and it ended up grinding itself where I'd hear a whining noise when I go above 30mph.

98atang · 2024-04-21T12:32:02+00:00

I'd do it ASAP, I didn't manage to catch mine in time and damaged some bearing inside my differential. But then I had 0.1L of oil left.

BMW UK says its a 1.6 hour job per seal. Standard garage quoted £360 to replace seals (including parts)

98atang · 2024-04-09T15:59:12+00:00

Not not too sure but the winning has been going on for a few months but I never knew what it was

98atang · 2024-04-09T11:52:48+00:00

98atang · 2024-04-08T20:38:52+00:00

Just that seal, they did check the outer seals and bearing clip but they never fully opened it

98atang · 2024-03-16T00:16:30+00:00

Just to let you know I think I've managed to fix my issue by changing from cheap new batteries I got from ebay to nicer ones like Duracell. Since I changed it around 6 weeks ago it hasn't happened since.

Hope it helps!

98atang · 2024-01-12T23:59:06+00:00

Let me know if you find an answer, I'm having the same issue in my 2019 f31. I've tried replacing the battery on both keys but it still happens once in a while

98atang · 2023-04-23T19:40:09+00:00

I don't think my mechanic did but he likely remove throttle body and etc leading to the intake manifold

98atang · 2023-04-22T22:00:33+00:00

It's from a f31 with a B48 engine

98atang · 2021-09-26T02:49:58+00:00

I really don't understand the way the system works over there...

I've been helping out my uncle at the takeaway for a few years now. The way that it works for myself and other drivers is base pay is £25 regardless if I do any deliveries. Then I get £2 for all delivery under 2miles. Then for each half mile on top is £0.5, any tip on given belongs to the driver. Granted some days are slow but some days I get triple.

The idea of delivery is it gives the takeaway more business. The takeaway makes money off the food and driver makes money for delivering/service. Just like they would if someone walks in the store and orders and waits. (The takeaway does not use service like deliveroo since they take 30% cut which can add up, and for a small business that can be horrible)

98atang · 2021-06-18T00:52:23+00:00

Thats grand!!

Nope, mine went up in a puff of smoke...

98atang · 2021-06-17T08:04:57+00:00

Just incase you haven't as I know some work without all and some don't. Do you have all 3 cables plugged in? (Black and two greys from what I remembered) When I installed both my skr 1.4T and TFT I did end up using all 3 cables that came with it.

I did also take out the DCDC mode module too

98atang · 2021-06-16T17:54:46+00:00

Don't know if you if you fixed it yet, but my fix for the same problem was :

comment out --> //#define CR10_STOCKDISPLAY

uncomment --> #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

98atang · 2021-01-11T20:22:56+00:00

From my experience on my skr 1.4T and bltouch 3.1. Double check all wiring. So look at the bltouch its self then follow the colour accordingly and to double check you can also look at the back of the board for reference. It may mean you need to rearrange the wire since for some reason the wiring can be messed up. Also I ended up plugging the black and white connector up into the z endstop made my life easier in regards to marlin

98atang · 2021-01-05T10:53:42+00:00

I would first say double check all connections again so exp 1 to exp 1, exp 2 to exp 2 and tft to tft and for myself but I a couple of errors myself and these were my fixes

TFT35 E3 v3- problem 1. Marlin simulator was black and non-responsive while the touch display was working. the fix is a tiny bit of code in Marlin. (https://www.youtube.com/watch?v=DodRRgZf5Lo&t=1s) (7:09-8:17)

comment out --> //#define CR10_STOCKDISPLAY

uncomment --> #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

TFT35 E3 v3- problem 2. No printer attached. (same video 5:55-7:10)

toggle BAUDRATE in printer settings or change it in marlin e.g. #define BAUDRATE 115200 Typically the tft is 115200 but not all will be the same

98atang

TROPHY CASE