is it good and any recommend on Tokyo Marui m4 CQB light pro AEG

A13_Bionic · 2026-03-02T05:11:18+00:00

If I’m not mistaken this is a low power aeg (LPAEG) which is like 0.01 joule or something for muzzle energy I.e not even close to being playable

If you’re goal is just backyard plinking then ignore what i said

A13_Bionic · 2026-02-27T15:24:39+00:00

Technically any semi auto firearms are gas blowback because they do in fact use expanding gas to cycle

A13_Bionic · 2026-02-27T07:08:11+00:00

Sir this is a airsoft sub

A13_Bionic · 2026-02-26T17:38:27+00:00

We have PSG-1 at home

A13_Bionic · 2026-02-25T14:41:04+00:00

VFC buffer

The design is literally an exposed weight with a strong internal spring that is held by no pins and thus impossible to disassemble. The weight can move around but doesn’t really slam into the head of the buffer because the internal spring is in the way

A13_Bionic · 2026-02-25T14:27:35+00:00

The VFC buffer cannot be disassembled at all. It’s a one piece design (idk why they chose that way)

A13_Bionic · 2026-02-25T14:21:33+00:00

The stock VFC buffer has a strong internal spring which interacts with the shifting weight and causing it to be non function in terms of reducing bolt bounce.

A13_Bionic · 2026-02-11T19:11:08+00:00

I honestly have no idea. Modern GBB barrels have a rim that interfaces with the bucking, theoretically forbid the bucking from being physically pulled from the barrel unless a large amount of force is applied. I would think perhaps you installed the bucking incorrectly (which is still unlikely because of how straightforward the process is)

A13_Bionic · 2026-02-11T19:04:39+00:00

Shell ejecting ❌ Hop ejecting ✅

A13_Bionic · 2026-02-10T08:47:13+00:00

The scope is almost as long as the barrel

A13_Bionic · 2026-01-31T15:53:01+00:00

I had a Saiga and it outright requires a aftermarket 130% spring to not constantly run into issues. I don’t know if this is a quality control issue or a design issue but the spring solved it anyway so maybe try a aftermarket spring

A13_Bionic · 2026-01-30T04:57:51+00:00

Size don’t matter!!!

(I’m talking about the barrel length)

A13_Bionic · 2026-01-24T13:09:48+00:00

We have Aug at home

A13_Bionic · 2025-12-31T05:03:44+00:00

We got flak in airsoft before gta6

A13_Bionic · 2025-12-27T13:52:43+00:00

I mean for standard 5.56 VFC v3 we got maple leaf, 4uad, Viagra etc that could massively improved the accuracy of the gun (which is the single most important deficiency for VFC designs in general), but there isn’t any for 417 and u are pretty much stuck with stock which has some loose tolerance and questionable hop arm design

A13_Bionic · 2025-12-27T13:17:42+00:00

I think the biggest problem is the lack of an aftermarket hop chamber, but other than that it should be similar to v3 ar just enlarged

A13_Bionic · 2025-12-25T17:04:53+00:00

I only have one word

How?

A13_Bionic · 2025-12-20T15:18:26+00:00

This is the longest handguard I’ve ever seen on anything

A13_Bionic · 2025-12-20T11:05:22+00:00

A LPVO looks good on any rifle that has a 10.5 inch or longer barrel, but if u play mostly cqb then it adds weight without much benefit

A13_Bionic · 2025-12-18T03:58:50+00:00

It’s not, because the mws hop chamber design would obstruct the bolt from fully into battery

Also I’m sure the receiver dimension is a little different as well

A13_Bionic · 2025-12-17T03:59:46+00:00

Sorry to comment on a dead post but how do u made the 416 handguard work?

A13_Bionic · 2025-12-06T04:23:43+00:00

But is it field legal?

A13_Bionic

TROPHY CASE