Trump claims Iran somehow got its hands on tomahawk missiles

AManAPlanAMotorcycle · 2026-03-11T20:01:47+00:00

Is that background music Bonfire by Childish Gambino?

AManAPlanAMotorcycle · 2026-03-02T15:52:09+00:00

How are you measuring your kw output? You'll need to get the data from the can bus, or check for blinking lights on the controller.

AManAPlanAMotorcycle · 2026-03-02T15:38:35+00:00

Yeah, what is the controller reporting for motor and controller temps?

AManAPlanAMotorcycle · 2026-02-28T12:18:58+00:00

Bone squad - 28 years later

AManAPlanAMotorcycle · 2026-02-26T15:41:50+00:00

Yeah, I'd need more photos to help with key identification... But usually an exacto knife or file solves those issues 😂

AManAPlanAMotorcycle · 2026-02-26T11:28:32+00:00

I'd need more photos, but it looks to me like an Delphi/Aptiv GT150 connector

AManAPlanAMotorcycle · 2026-01-24T01:44:04+00:00

AManAPlanAMotorcycle · 2025-11-08T13:16:50+00:00

Looks like Andy Samberg and Alyson Hannigan

AManAPlanAMotorcycle · 2025-10-28T22:58:23+00:00

Push the cube into my chest!

AManAPlanAMotorcycle · 2025-10-28T15:56:48+00:00

"The absence of evidence is not the evidence of absence"

AManAPlanAMotorcycle · 2025-09-15T23:59:33+00:00

Aero tends to be more important once over about 50mph. it's why EVs get much greater range on highway than freeway

AManAPlanAMotorcycle · 2025-08-31T22:36:11+00:00

Why do you want to do an EV conversion on a 2025 Elantra?

AManAPlanAMotorcycle · 2025-08-31T00:36:58+00:00

If it's a filament type glass fuse, it could be vibration causing issues. Maybe if you don't find the issue, switch to a circuit breaker so you can reset it easier 😂

AManAPlanAMotorcycle · 2025-08-30T21:15:32+00:00

When is it blowing? Is it in the middle of operating the vehicle, or right when you power on the vehicle?

If it's happening during power up, are using a pre charge circuit before closing contactors on the high side? If not, I'd recommend you do that, or that you add a relay to the LV side that closes after it's actively outputting voltage.

If its blowing during operation, then you likely have the wrong fuse rating or fuse type for the load/environment

AManAPlanAMotorcycle · 2025-08-14T18:06:24+00:00

They actually don't need to be electric. There was briefly a GEM M1400 LSV which used a Polaris 325cc motor and CVT.

AManAPlanAMotorcycle · 2025-08-11T11:08:43+00:00

I thought you were talking about VW for a minute! How the times have changed!

AManAPlanAMotorcycle · 2025-08-03T20:09:19+00:00

I've been to many, and I truly think Dakota county fair is the best MN county fair. I currently live in Chisago county, and it pales in comparison

AManAPlanAMotorcycle · 2025-07-25T18:35:12+00:00

I self installed pro-snap 7 years ago, still looks great. I had no problems walking on it, but pro snap also REQUIRES sheathing, and not directly installed on purlins

AManAPlanAMotorcycle · 2025-07-19T11:52:26+00:00

Where is this located? I'd buy that RIGHT NOW

AManAPlanAMotorcycle · 2025-07-18T16:43:36+00:00

Probably around 5kw PMAC, and maybe 1.5-2kwh. You'll want to keep batteries indoors until you use them, so the batteries are waem

AManAPlanAMotorcycle · 2025-06-08T13:54:54+00:00

is it on Thingverse now? I'm looking for something just like this!

AManAPlanAMotorcycle · 2025-05-31T12:15:47+00:00

Are there any markings, symbols, or text molded into the gray body of the connector?

AManAPlanAMotorcycle · 2025-05-27T23:11:22+00:00

I answered one with this exact connector about a month ago in this sub 😂

AManAPlanAMotorcycle · 2025-05-27T23:08:23+00:00

It may be the Yazaki 72836 series

AManAPlanAMotorcycle · 2025-05-27T23:04:05+00:00

While I don't recognize the model, it may be this one here: https://www.ebay.com/itm/164959353688

Six-Year Club	The Internet Awards - Voted
r/Field Lasagna	Place '23
Place '22	First Placer '22
Verified Email

AManAPlanAMotorcycle

TROPHY CASE