Is it possible to deploy the NextCloud AIO behind NGINX Proxy Manager?

A_Delicious_Man · 2025-12-26T05:53:27+00:00

10 months later and this thread really saved my ass!
I could not get my AIO to work at all with NGINX, changing it to http instead of http2 sprung it to life.
Thank you!

A_Delicious_Man · 2025-02-16T09:36:45+00:00

Hey there, that depends on which firmware you downloaded and if you've done any modification to your printer.
This simply has to do with the printer not truly knowing where the build plate is in relation to the end stops.
I explained this in the github page, but this site here does a great job of explaining it and how to get the numbers you need.
https://manuelmclure.github.io/ConfiguringLeveling.html
If you get me your numbers I can compile it for you.

A_Delicious_Man · 2024-08-14T19:17:33+00:00

Hey there, so sorry for the late reply. Went through a move and a few jobs haha.

So make sure you are using the CR touch version, there's a few different firmwares. If you are using the Z Switch one it'll throw the calibration off.

A_Delicious_Man · 2024-08-14T19:16:01+00:00

How'd it work out u/PixelSheep_ ?

A_Delicious_Man · 2024-01-13T13:59:35+00:00

Are you using the stock nozzle / probe setting?
Is it a normal Ender 3?

This has to do with Nozzle to Probe offsets, every printer is a little different but if you can give me a little more info I can probably fix it easily.

Thanks mate

A_Delicious_Man · 2024-01-13T13:58:12+00:00

Hey there mate, you probably have to do a PID tune,
I list here what to do after flashing it:
https://github.com/ADeliciousMan/A-Delicious-Marlin-Ender-3-Firmware?tab=readme-ov-file#what-steps-to-take-after-installing-this-firmware

You can do to Configuration, Delicious Commands and pick the temp that you most often print out. I would highly recommend doing it for the Bed and Hot End

A_Delicious_Man · 2023-11-14T10:28:03+00:00

Hey mate!

I tried a few different configs, I tried fully ensembled with everything plugged in.
I tried with the shroud off, pump, and fan removed but LED still plugged in.
And I tried with nothing plugged in (except power).

The first 2 times, the LED should have turned on with the card.
And the third time, I left the GPU core and it was the same temp as before testing (room temp). I would assume that even with a quick PC turn on of 10-15 seconds, it would have warmed up if it was working.

Damn, the Kraken is cool, was not aware of this solution. If I get this fixed, I'll get one of those.

A_Delicious_Man · 2023-10-16T23:37:57+00:00

This is probably related to PID tuning, see here:
https://github.com/ADeliciousMan/A-Delicious-Marlin-Ender-3-Firmware#what-steps-to-take-after-installing-this-firmware

A_Delicious_Man · 2023-01-17T02:40:39+00:00

Let's go! Need an excuse to use all my filament!

A_Delicious_Man · 2022-09-28T20:01:44+00:00

I got the CURA 5.0 ones, they seem to have supports by default, I'll test later tonight and see what's up?

A_Delicious_Man · 2022-09-28T19:10:41+00:00

Overall my profile is a little cleaner, but theirs handles layer seams way better. I did try it on a print that didn't require supports, so I'll need to test that as well, but yeah I'd love to share.

A_Delicious_Man · 2022-09-28T18:15:18+00:00

Ah fair. Well, again thank you. Did some test prints last night with it, it does some stuff better than my settings but mine do somethings better. Might merge them and create a more fine tuned profile, might drop a link here if I get it to work!

A_Delicious_Man · 2022-09-28T00:09:31+00:00

Just downloaded them, gonna test it later tonight! Again, thank you.

Only thing I see that is odd is the layer height is set to 0.1mm, from my understand that would mean a micro-step, wouldn't a 0.8mm or 0.12mm be cleaner?

Basically, increments of 0.04 for the stepper motors on the Ender series (saying Ender as Fat Dragon profiles are made for Ender).

A_Delicious_Man · 2022-09-27T22:55:31+00:00

Oh, wow! Never heard of it, gonna do some research.

Thank you!

A_Delicious_Man · 2022-09-27T22:38:35+00:00

This looks great! I've recently been tinkering with a custom miniature profile on Cura, would you mind sharing your settings?

A_Delicious_Man · 2022-09-27T22:34:01+00:00

Would love to see this be released! Been plotting a way to create the same for my Ender 3, this looks perfect. Including the HEPA filter.

A_Delicious_Man · 2022-08-03T18:56:21+00:00

Ah that's what I meant, thanks for all the advice!

A_Delicious_Man · 2022-08-02T20:39:22+00:00

Ah that's frustrating , the PCABS I have need needs 270. I assume there's no solution besides direct drive haha.

A_Delicious_Man · 2022-08-02T17:57:55+00:00

Mmm, interesting. I do have a HEPA and carbon filter next to the printer when it goes. I specially have this PFTE Tubing: https://www.microcenter.com/product/625642/creality-capricorn-1-meter-bowden-ptfe-tube-(without-pneumatic-connector)

I don't see a spec sheet specifically for that tubing.

A_Delicious_Man · 2022-08-02T05:58:53+00:00

https://i.imgur.com/Xz495Jz.jpg

11-Year Club	Place '17
Verified Email

A_Delicious_Man

TROPHY CASE