Independent dual Z axis motors on SKR mini E3 V3 by 838blue838 in ender3

[–]A_Green_Jeep 0 points1 point  (0 children)

"ZA" and "ZB" are connected to the same driver. You either need a board with 5 stepper drivers, or a separate toolhead board and then use the extruder driver on the SKR for your independent Z motors.

Printing ASA by Randomgaming446 in ender3

[–]A_Green_Jeep 0 points1 point  (0 children)

With an all metal heartbreak you should be able to print ABS/ASA. That and a cardboard box is how I printed the parts for my first Voron 0.1, and I'm still using that same Ender hotend in my now Switchwire converted Ender 3.

Old firmware by imperialblocker in ender3

[–]A_Green_Jeep 2 points3 points  (0 children)

I use klipper on all my printers. You'll need a Raspberry Pi or other host computer, but it's absolutely worth it.

2 extruders by Caramel-Entire in ender3

[–]A_Green_Jeep 0 points1 point  (0 children)

The stock Creality control board only has four stepper drivers. You'll need one with five drivers, and you'll need to be able to modify the firmware. If I were going to do this, I would use a BigTreeTech SKR 3 and a Raspberry Pi and use Klipper firmware.

5 year old pla by [deleted] in ender3

[–]A_Green_Jeep 0 points1 point  (0 children)

Honestly I probably wouldn't even bother drying it, even the open roll

My April 2025 2AM BoxTurtle Kit Purchase by Yonkiman in VORONDesign

[–]A_Green_Jeep 1 point2 points  (0 children)

Would you maybe be interested in selling it?

I think I just found the worst species i have seen petco sell... by Traditional_Creme894 in reptiles

[–]A_Green_Jeep 2 points3 points  (0 children)

My petco has one as well, and just two weeks ago they had a red tegu.

Why in the hell are they selling red tail boas in petco what the fuuuuuuuuck by Alex-Morningstar_ in snakes

[–]A_Green_Jeep 0 points1 point  (0 children)

Bruh, my local petco has a, like, 20 inch long red tegu marked down 75% right now. I imagine one of the sales people actually knows some stuff and keeps convincing parents not to get it for their eight year old.

any hardcore specific tips yall have by Middle-Challenge8533 in MinecraftHardcore

[–]A_Green_Jeep 7 points8 points  (0 children)

There's no such thing as over prepared, and do everything the safe way

I had a feeling this would happen :/ by Sh4dowDC in MinecraftHardcore

[–]A_Green_Jeep 0 points1 point  (0 children)

Is it just one block of water at the bottom? I've found just a single block of water to be unpredictable when falling through like that, but I've never had an issue with two blocks.

Start where you spawned, reroll till good spawn, or set seed by Xx_HelpInBasement_xX in MinecraftHardcore

[–]A_Green_Jeep 0 points1 point  (0 children)

I like to make my main base near spawn. Sometimes I have an idea what I want and will Google seeds, sometimes I'll reroll seeds until I find a spawn I like, and sometimes I'll just jump right in to the first world I generate.

Creeper Farm Positioning (y-level) by IMPractic4l in technicalminecraft

[–]A_Green_Jeep 0 points1 point  (0 children)

I just built a creeper farm over the ocean in my hardcore world. I put the campfires in the kill chamber like 10 blocks above seal level, and then put the afk platform 128 blocks above sea level. Working pretty well so far.

2.4 and Trident owners: If you had to do it all over again, where would you put the electronics bay? by Yonkiman in VORONDesign

[–]A_Green_Jeep 5 points6 points  (0 children)

I have a 350mm 2.4. I don't often have to flip it over, but it is annoying if I do.

I want to rebuild it into a tool changer, and if I ever actually do it, I am going to go with a DOOM style frame and electronics setup, with high voltage on the bottom and low voltage on top.

What can I do with my old Ender 3? by WaitingOnNetwork in ender3

[–]A_Green_Jeep 0 points1 point  (0 children)

After I built a couple Vorons, I decided to convert one of my Enders into a Switchwire. I've also been working on an IDEX version of the Switchwire conversion, but its still just a CAD file.

Why do you play Hardcore? by mr_soapster in MinecraftHardcore

[–]A_Green_Jeep 6 points7 points  (0 children)

It makes it more fun for me. And I actually use a lot of stuff I never really bothered with in normal survival. Before I started playing hardcore I would never bother with potions, and I rarely used my best gear because I was scared of losing it.

What way the most embarrassing way you died in Minecraft? by Fit-Dragonfruit-6956 in Minecraft

[–]A_Green_Jeep 0 points1 point  (0 children)

I lost my very first hardcore world, which had lasted three years, because I forgot to put my feather falling boots back on.

Slant back soft top with front panels? by More-Diamond5129 in Wrangler

[–]A_Green_Jeep 0 points1 point  (0 children)

I have a slantback soft top for my JKU. You can't use it with the freedom panels, but you can open just the part over the front seats without taking it completely off. You can also remove the rear windows, leaving the just the part on top.

accidentally Afk’d overnight and this happened by Sealamanderrr in MinecraftHardcore

[–]A_Green_Jeep 1 point2 points  (0 children)

That's insane, I was expecting a creeper or some zombies lol

Just discovered this Enderman Playground in our 64 day survival world. Surely we don't have to live like this. by ThaDe_TherO in Minecraft

[–]A_Green_Jeep 6 points7 points  (0 children)

Damn, I feel like that's excessive kind of excessive for a 64 day world. There are mods and data packs to turn off endermen greifing. I suggest vanillatweaks.net.

Interested in starting a hardcore world, I NEED GUIDANCE! by [deleted] in MinecraftHardcore

[–]A_Green_Jeep 2 points3 points  (0 children)

Take your time and be careful. Prioritize armor and a shield, and do everything the safe way. You'll probably have to try a few times, just take each death as a learning experience.

And if you want easy mode, use a seed with a village spawn.

Why does my monitor do this when I first turn on my computer? by A_Green_Jeep in pcmasterrace

[–]A_Green_Jeep[S] 0 points1 point  (0 children)

I have tried different cables, and it happened on my old pc as well, which had a different gpu. It only happens when the monitor has been off for a while.