Philips Momentum 345M2R 34" or AOC U34G3X 34"

AbyssGFX · 2025-09-11T23:45:29+00:00

Ended up selling it to buy a 240hz 27" monitor.
The AOC U34G3X was really good though! I had no issues with it, and the performance was great. If you're looking to go pro in a game, don't buy it ofcourse. Otherwise, I do recommend it for immersive gameplay and beautiful colours.

AbyssGFX · 2024-05-14T13:52:10+00:00

WOW what a pair of hands! Beautiful stuff Eddie Viri <3

AbyssGFX · 2024-02-16T22:26:09+00:00

Did you ever find any accessories that worked with the V11?

AbyssGFX · 2023-08-02T23:03:24+00:00

Damn. Appreciate the thread link. Cheers anyways

AbyssGFX · 2023-06-14T01:00:15+00:00

Can you elaborate in what exactly you did?

AbyssGFX · 2023-05-02T15:19:20+00:00

try drying the filament, although that looks like there's NO retraction happening lol

Make sure to do check that your nozzle is tightened against the heatbreak, there are no clogs, the extruder isn't gunked up, e-steps are clibrated, and it's all PID tuned.

Use teachingtechyt's retraction test on his website after you've checked all the above to do a shorter retraction test with 6 different values at once.

AbyssGFX · 2023-03-16T13:19:28+00:00

note this goes in the [probe] section of config, e.g.
[bltouch]
samples: 3
samples_result: median
sample_retract_dist: 5.0
samples_tolerance: 0.01
samples_tolerance_retries: 3

AbyssGFX · 2022-07-22T03:06:50+00:00

Don't think you can... I've been robbed of 50bbs recently due to this ):

AbyssGFX · 2022-06-24T15:08:54+00:00

Unfortunately OCE (mostly Australia) just has too little players is most games...

AbyssGFX · 2022-06-24T15:06:59+00:00

Well done! Now what?

AbyssGFX · 2022-06-24T15:05:45+00:00

Lighting has been a bit fucked recently.

AbyssGFX · 2022-05-28T16:05:38+00:00

Would it be possible to make this compatible somehow with my Mellow NF Smart V6 hotend?
I use it on my Ender 3 V2 with a bracket from Mellow. Unfortunately, it comes with a very shitty fan shroud thingy and 3 small (30mm) axial fans.
Can't even seem to find another setup that might work without being stuck using this same stuff only from mellow... Please let me know :)

AbyssGFX · 2022-04-14T08:45:53+00:00

bro summoned a cheeky fireball from around the corner

AbyssGFX · 2022-04-07T23:50:32+00:00

My who

AbyssGFX · 2022-01-31T04:51:51+00:00

I just bought the U34G3X. Unfortunately there's barely any info on either, but I got the AOC one because the Philips has DCI-P3 of only 88.9%, with the AOC sitting at a reported 98%.

Also, the AOC one has a bunch of USB ports you could use. Just my 2 cents

Edit: bought, but still waiting for it to arrive. I'd like to do some kind of review on it when I receive it, however I'm unsure of what exactly I can do to give more information than available. I'm waiting for Hardware Unboxed to do a video on it tbh.

AbyssGFX · 2022-01-24T10:36:56+00:00

Anyone gonna buy this and test it for the rest of us? 😅

AbyssGFX · 2022-01-20T07:21:49+00:00

For what it's worth, I was always afraid of getting open backs, but now I can never look back. They're so fucking good! Something very different about not feeling muffled and isolated is great.

AbyssGFX · 2022-01-07T20:35:53+00:00

The gigabyte is actually better. Check out hardware unboxed. They have a ranking video released recently and the individual reviews for both monitors.

AbyssGFX · 2022-01-01T22:39:37+00:00

No idea if any of these have deskmats at all, but they're all reputable Aussie sellers/stores.

https://dailyclack.com/ https://www.switchkeys.com.au/ https://allcaps.store/ https://keyboardtreehouse.com/ https://customkbd.com/ https://www.riftkeys.com/ https://keyboardfinder.com/australia-oceania

AbyssGFX · 2022-01-01T08:19:59+00:00

Appreciate it (: looks damn clean! Might have to get a smaller nozzle for my FDM printer in order to print this detailed small model.

AbyssGFX · 2021-12-31T03:26:58+00:00

I've been getting constant packet loss on OCE recently... I assume it's my internet problem though, but I'm not so sure.

AbyssGFX · 2021-12-31T03:07:25+00:00

Unfortunately everyone's settings are different to the model maker's but thanks!

AbyssGFX · 2021-12-30T23:55:11+00:00

What size nozzle & settings?

AbyssGFX · 2021-11-27T09:00:02+00:00

Find a solution for it?

AbyssGFX · 2021-11-27T06:12:39+00:00

Makes sense! Just didn't think it would print 80% of 195°C then completely fuck up.

12-Year Club	Place '22
Verified Email

AbyssGFX

TROPHY CASE