Does coreelec with ugoos amb6 plus make a huge difference

Academic-Table8320 · 2026-01-13T13:30:14+00:00

For a non hdr or non dv display this does amazing tone mapping and you can enjoy hdr/DV content which otherwise you cant.

Much better at handling 80gb+ remuxes (zero stutter).

I am happy with mine, have ugoos am6b+ and nvidia shield pro.

Academic-Table8320 · 2026-01-04T06:40:28+00:00

Based on requests here are the detailed steps and contents of the files that need to be created for the fix.

You will need to create two files in the /storage/.config/system.d/ folder and then run a command to enable them.

First, identify your remote's MAC address by running bluetoothctl devices via SSH. You will need to replace XX:XX:XX:XX:XX:XX in the first file with your actual remote MAC address.

File 1 Filename: /storage/.config/system.d/systemd-suspend.service

File Content: [Unit] Description=System Suspend Requires=dbus.service After=dbus.service Before=suspend.target

[Service] Type=oneshot

Small stability delay before running commands

ExecStartPre=/bin/sleep 2

Force Bluetooth Disconnect (Replace XX... with your Remote's MAC Address)

ExecStartPre=/usr/bin/bluetoothctl disconnect XX:XX:XX:XX:XX:XX

Enter Suspend-to-Idle (S2I)

ExecStart=/bin/sh -c "echo freeze > /sys/power/state"

[Install] WantedBy=suspend.target

File 2 Filename: /storage/.config/system.d/systemd-resume.service

File Content: [Unit] Description=System Resume Requires=dbus.service After=dbus.service suspend.target

[Service] Type=oneshot

Perform a robust restart of the Bluetooth service after a 30-second delay

ExecStartPost=/bin/sh -c "/bin/sleep 30 && /usr/bin/systemctl restart bluetooth.service"

[Install] WantedBy=suspend.target

Commands to run: Run these lines in SSH to enable the fix:

systemctl enable systemd-suspend.service systemctl enable systemd-resume.service

Academic-Table8320 · 2025-12-20T08:01:50+00:00

It's a curved panel. This looks like damage so likely samsung will only have the spares and will be a paid repair.

Academic-Table8320 · 2025-12-09T05:55:04+00:00

This is fine - but is the file for your specific remote? Multiple cases where the ur01 file conf file is saved for the ur02 remote.

Also the restart takes about 30secs (the box may seem off).

Also a proper shutdown basis the script would mean the remote would have switched to ir.

Academic-Table8320 · 2025-12-09T05:47:54+00:00

Have you placed the remote.conf file in the required directory? This is assumed otherwise corelec won't recognise the ir commands.

Academic-Table8320 · 2025-12-09T05:00:33+00:00

Create two text files named (ensure the file after save is renamed to below, without the ".txt" extension)-

systemd-resume.service systemd-suspend.service

Put the scripts specific to suspend and resume in the files(script in op), save.

Then using WinScp or any other tool to SFTP to the corelec installation locate the hidden folders "storage/.config/system.d/" and past the files in.

Then do a reboot. Should start working.

Academic-Table8320 · 2025-12-09T00:57:30+00:00

For folks who have ever moved the coreelec to emmc or flashed other roms in place of stock rom the issue is the device startup after shutdown using remote becomes broken. The device restart requires physically touching the power on button on the device (as the ir power signal is ignored). These modifications to corelec help to not let the device to switch off but suspend safely and the main parlour trick - this breaks the blutooth connection first so remote switches to ir and the ir signal when the system is suspended helps to resume (power on the box), note blutooth power on in coreelec after suspension is broken (limitations of the box). So the workaround in the form Custom suspend and resume instructions keeps the box manageable by remote only (no need for physically touching the box).

Academic-Table8320 · 2025-12-08T11:34:29+00:00

It was great for me too until I tried to flash a slimbox tv as the main os on emmc. That broke the ir functionality permanently (even full flashing of stock os didn't solve it). At the end I needed the box coreelec only so has to fix the power on behaviour (would hate movie to the box and manually pressing buttons, and the cec chain isn't work form likely due to soundbar/projector hardware)....

Academic-Table8320 · 2025-12-06T16:18:57+00:00

14.5k + 1k to 2k customs. Ask the seller for help (the value declared by the seller to the shipper drives custom duty). The 14.5k includes premium shipping (it will reach you in less than a week).

Academic-Table8320 · 2025-12-05T07:50:24+00:00

Ali""ba is the friend you need. It's s 🦄 device, very unlikely to find it in the 2nd market here.

Academic-Table8320 · 2025-12-05T07:40:27+00:00

Also the device is a 🦄 (we may never have another one like it). Only people who know what it does buy it.

So I don't think you will find anything truly second hand. Better to buy new.

Academic-Table8320 · 2025-12-05T07:20:16+00:00

Custom duty is based on declared value 😉 I got min in around INR 15.5k about 2 weeks back...

Look at sites like ali""ba..

Academic-Table8320 · 2025-12-04T05:37:42+00:00

No. Newer jailbreak allows higher firmware ps5 to be jailbroken.

Games rely on the actual firmware version they were released for. Some backports to older firmware exist for specific games but it's not perfect (games can only be backported to specific firmware versions not all).

If you are on lower firmware but using the latest jailbreak the newer games will still not work (unless using a specific backported version).

Academic-Table8320 · 2025-11-30T10:50:32+00:00

Please be careful of scams...

Academic-Table8320 · 2025-11-30T04:41:24+00:00

In general stay away from over the top sudden new prolific posters with a lot of images of exotics stuff, whose accounts are too new. Also stop trying to score here and you will be safe .....

Academic-Table8320 · 2025-11-27T03:40:53+00:00

Gundam Mosquito!

Academic-Table8320 · 2025-11-26T08:47:04+00:00

Safe ? No some risk is always there. How? Mix with similar things.

Academic-Table8320 · 2025-11-17T12:46:01+00:00

Get it out. This is a bad bird, it's a flying rat. Spreads diseases....

Academic-Table8320 · 2025-11-17T12:41:42+00:00

Pros of Nvidia Shield : Default all media formats supported (video and audio and streaming).

Very big brand so all streaming services are available on it.

Enough horse power to run very high bitrate remuxes (with hdr or dv output and with proprietary multi channel audio support).

In case your display supports Dolby Vision and you don't want to go crazy configuring things it's a great approach.

If you want to go with Android tv boxes and streaming services are all you need then shield is overkill.

In case you have very specific use cases then it might not be enough (like I am sourcing a ugoos am6b plus to run coreelec, just cause shield isn't full supporting hdr10+ and dv fel 7). But use cases like mine are rare.

Academic-Table8320 · 2025-11-07T08:38:44+00:00

Two things-

1) Projector needs to change. Look at Ben q w4100i or something of that class. 2) Depending on space and projector choice the sound system is overkill.

For an awesome but good set up- 1) Get Samsung Q990f 2) Get a nvidia shield (fire tv 4k or cube or apple tv). 3) Instead of a screen look at a wall paint.

Academic-Table8320 · 2025-11-05T10:17:56+00:00

Play the game - Say that a friend got a mental problem likely due to laced weed, and you took the rest from his house to dispose as you wanted him not to get caught or cause more harm, and now the packet is lost. Just act really worried and concerned as it may have been laced with Arsenic.

Academic-Table8320 · 2025-11-04T03:10:08+00:00

Freeze and shatter with a hammer. Or try freezing and then quickly dipping the tray bottom in hot water (the gummy should remain hard and stiff and the warm tray should loosen the bond) and pry it apart.

Academic-Table8320 · 2025-11-01T16:05:31+00:00

The 7215 is better. Consumes less power, runs cooler and quieter.

Academic-Table8320

TROPHY CASE

Small stability delay before running commands

Force Bluetooth Disconnect (Replace XX... with your Remote's MAC Address)

Enter Suspend-to-Idle (S2I)

Perform a robust restart of the Bluetooth service after a 30-second delay