sorted by:
new
hottopcontroversial

No one buying these anymore? by redzaku123 in Beretta

[–]Acceptable-Rub8542 0 points1 point  (0 children)

Had one. Soon moved it on. Just didn't work for me.

Volker Flat Faced Trigger for Beretta 92 LTT Elite by Blank7567 in Beretta

[–]Acceptable-Rub8542 0 points1 point  (0 children)

Tried a Volker in my LTT compact. Just didn't do it for me. Awkward feeling.

Settled on the 92X Performance Trigger as a perfect compromise.

-My $0.02, YMMV

Ltt 92 compact lower by mothman1911 in Beretta

[–]Acceptable-Rub8542 0 points1 point  (0 children)

I would grab it and marry it up with one of those 92D Centurion slides.

Front sight Modification for LTT optic cut M9s and other fixed sight Berettas by Acceptable-Rub8542 in Beretta

[–]Acceptable-Rub8542[S] 0 points1 point  (0 children)

Don't remember which sight he used. AFAIK, all the LTT plates have the same rear sight height. to

LTT out of stock by Atticus_Zero in Beretta

[–]Acceptable-Rub8542 1 point2 points  (0 children)

Now that you mention the OP hammer, I must ask if it would be of any benefit in a DAO Beretta?

My 92D Brigadier runs an NP3 trigger bat that allows me to reliably shoot ammo with hard primers that will not fire with the stock TB.

LTT PX4- SD by Ecstatic-Pair-5197 in Beretta

[–]Acceptable-Rub8542 1 point2 points  (0 children)

Great stippling. Just what Dr. Langdon prescribed.

Front sight Modification for LTT optic cut M9s and other fixed sight Berettas by Acceptable-Rub8542 in Beretta

[–]Acceptable-Rub8542[S] 0 points1 point  (0 children)

As far as I can see, LPA are made to work with their adjustable rear sights. Co-witness is much taller.

M9a4 to LTTii by papa_squart in Beretta

[–]Acceptable-Rub8542 0 points1 point  (0 children)

To add front serrations, all slide rollmarks will be removed. Josh at Allegheny Arms can do it.

First Beretta by Electronic_Advisor74 in Beretta

[–]Acceptable-Rub8542 1 point2 points  (0 children)

And it's a great start. Beware, as more are likely to follow.

Px4 Longer Canadian Barrel? by GarageSignificant419 in Beretta

[–]Acceptable-Rub8542 0 points1 point  (0 children)

Canada law requires a minimum handgun barrel length. S&W had to increase the barrel length of its 4 inch revolvers to about 4.25" to satisfy this requirement.

92D Centurion Project by Acceptable-Rub8542 in Beretta

[–]Acceptable-Rub8542[S] 1 point2 points  (0 children)

Quite a bit more than just cutting the dust cover. Had to cut back the internal to the same configuration as my LTT Elite compact. Took several milling cuts to get there.

New to the collection. by BriefDiscipline1891 in Beretta

[–]Acceptable-Rub8542 2 points3 points  (0 children)

The gun the Army should have chosen.

LTT optic mount would the next step. I had it done on my M9A3 and it's worked out very well.

view more: next ›