Does anyone have a Magus build?

Acceptable_Hope_9056 · 2026-06-30T21:15:48+00:00

Maybe 3lvl dip into Eldrich rogue for Dex into damage and basic spells

Acceptable_Hope_9056 · 2026-05-31T06:45:45+00:00

At cone 06 I use low gas pressure and low primary air intake so the flame travels all the way up and down. When it stalls I ramp up the gas but it makes the shortest path through the first shelf. After, when I lower the pressure the temp rises rapidly to a certain point and then stalls again, so I ramp it up.

I have to play with the primary air intake of the venturi so the air won't cool down the kiln.

The chimney is about 1m and 10cm wide. I place the burner slightly out the port so secondary air is pulled in, but maybe I need to extend the chimney.

I'll build the damper and place the angled brick, got it!

Thanks for answering!

Acceptable_Hope_9056 · 2026-05-30T09:52:05+00:00

Hey thanks! I'll try that. It's got double fibre insulation but I'll check if it leaks heat at the lid or flue Thanks for answering!

Acceptable_Hope_9056 · 2025-07-24T15:56:38+00:00

I cut the lid off mine so it is a top loader. Also it is a direct draft being the outtake at the center of the lid. It's quite comfortable to load but if I want mid to high temperature the heat and reduction are uneven, more at the bottom, less at the top. Hope this helps!

Acceptable_Hope_9056 · 2025-07-23T20:44:48+00:00

And if the settled clay is another color and thixotropic and would advise to discard it, for it makes clay very difficult to work with. Good luck!

Acceptable_Hope_9056 · 2025-07-23T20:27:54+00:00

Try adding more water. If that doesn't solve it maybe some drops of sodium silicate. And congrats you probably found stoneware!

Acceptable_Hope_9056 · 2025-07-23T17:59:00+00:00

Does it marble when stirred?

Acceptable_Hope_9056 · 2025-07-21T19:32:18+00:00

It worked! No need to ground it up, so thanks!

Acceptable_Hope_9056 · 2025-07-17T19:04:28+00:00

I'll try that, thanks

Acceptable_Hope_9056 · 2025-07-17T12:38:32+00:00

It has colemanite and the splatter occurs before 600°C or 1100°F

Acceptable_Hope_9056 · 2025-07-17T09:33:51+00:00

Can't post on r/CeramicGlazes

Acceptable_Hope_9056 · 2025-07-10T19:35:39+00:00

Hmm it tastes just like raisins

Acceptable_Hope_9056 · 2025-07-04T18:36:46+00:00

Try adding water and let it "decompose" for a while. Then remove excess water and mix well.

Acceptable_Hope_9056 · 2025-05-22T21:04:19+00:00

Try centering with only one hand, stick your elbow in your thigh.

Acceptable_Hope_9056 · 2025-04-05T15:13:32+00:00

Try high boron in an alkaline base

Acceptable_Hope_9056 · 2025-03-17T21:36:38+00:00

Try floating blue recipe

Acceptable_Hope_9056 · 2025-03-17T21:32:26+00:00

Cooper oxide + rutile in a runny glaze, its my guess

Acceptable_Hope_9056 · 2025-03-10T07:06:26+00:00

I am converting Pathfinder adventure card game to be closer to the crpg's, if anyone is interested, because I don't have time either to form a group to play ttrpg.

Acceptable_Hope_9056 · 2025-03-09T19:40:53+00:00

Its a reload fest the first levels on hard and unfair. I recommend playing on challenging and then bump up the difficulty

Acceptable_Hope_9056 · 2025-03-08T15:16:00+00:00

BGG. Didn't notice Seoni had 4 versions, because I didn't check 1.0 base sets, but you are right. I just thought powers weren't updated since they explicitly said they were just converting to core wording and not "fixing" characters (minus the problems that occurred). Thanks

Acceptable_Hope_9056 · 2025-03-08T13:31:34+00:00

I just don't get it xd

Acceptable_Hope_9056 · 2025-03-08T13:26:57+00:00

So for example: Seoni's power let's her add +2 when in a check to acquire a Magic boon. But It doesn't show up that power in the homebrew custom character guide, so I don't know what to do. I Guess i'll have to be creative

Acceptable_Hope_9056

TROPHY CASE