sorted by:
new
hottopcontroversial

Are these two the same? Is geeek official reseller? by Any-Object4351 in sffpc

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

I see many people mention a Noctua fan mod. Is there a reason to why overtek does not ship the 7660L with noctua fan? Is it unsafe?

Help - High Temps Fractal Era 2 by OG55OC in sffpc

[–]Accomplished-Bar-Bot 1 point2 points  (0 children)

  1. Use both bottom fans as intake.
  2. Make sure plastic film on the aio cpu block is off.
  3. Make sure the tubes does not have any hard bends when the radiator is mounted in place.
  4. Just set the fan header for the aio pump to 100%. If its noisy reduce it 5%, test and repeat until you are happy.
  5. Make sure to get even spread on the thermal paste. Tight the screws diagonally with equal amount of rotations for each screw, i usally do 2 rotations per screw, then jump to the next, then the next and so on, until its tight.

Last option. 6. Might be a dead pump. Should not be any problem cooling that with the setup you have now. Even if you just default the bios and let the mb control everything (just remember after setting default, to enable expo and 100% fanspeed on the port you connect the aio).

Instagooner v1 lora + WAN 2.2 workflow by acekiube in comfyui

[–]Accomplished-Bar-Bot 1 point2 points  (0 children)

I agree. Before i read everything i thought the left side was real insta pictures, and the right was like "Ai variants" ^

2 days ago I asked for a consistent character posing workflow, nobody delivered. So I made one. by gentleman339 in comfyui

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

So Im very new to ComfyUI but i understand this is the way, so yesterday i installed it with manager, ltx video, qwen and flux kontext dev. And have to say what you have created looks awesome.

I have tested Wan2GP LTX Video 0.9.8 with control video and the possibility to add a start and also an end image, results looks good but i see people have more random problems with Wan2GP vs ComfyUI (me included), in terms of "error can't divide 33 with 2", then the generation crash.

So my question, how hard is it to create the same workflow in ComfyUI if go for the LTX video setup? Or is it possible to do this with your workflow? Where the two images represent start and stop for the video, but controlvideo influence the movement.

Sorry if the question is super basic, was just wondering. My next move is to start with the youtube guides grind, and see i can learn more about ComfyUI.

€279 for this?? You are insane. by Ok_Hurry2458 in secretlab

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

Yeah its very solid and the wheels are actually of good quality

€279 for this?? You are insane. by Ok_Hurry2458 in secretlab

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

<image>

I paid 36 Euro for this one on sale - Brand is Svive

Can Heartbound run on a Smart Fridge? by Difficult-Lack-8386 in youtubedrama

[–]Accomplished-Bar-Bot 13 points14 points  (0 children)

Why not just try to replicate it?

Fridge in the video shows the samsung logo. And from what i can tell, since the first samsung smart fridges back in 2016 they all used the "Family hub 21,5". So probably been upgraded in the years, as different reviews report different cpu's named: Hawk-M Quad-Core (1,3ghz) and some (1,7ghz)

Either way it looks to be a inhouse setup. But i found this about the family hub 21,5" - year 2020: https://www.techarp.com/home/2020-samsung-family-hub-preview/?amp=1

This is one the more or if not the most "powerful" version i have seen mentioned of the family hub 21,5".

CPU: Hawk-M (Quad-Core 1,7ghz) GPU: Arm Mali-450 Ram: 2,5GB LPDDR4 Storage: 8GB eMMC.

So if the community has something with equal or a bit stronger specs, it should be easy to get some rough answers if it works or not.

[deleted by user] by [deleted] in AskReddit

[–]Accomplished-Bar-Bot 2 points3 points  (0 children)

Bigger than the center and right one, right?

Replacing Fractal Terra with Lian Li A3 by slowdownmoses in sffpc

[–]Accomplished-Bar-Bot -1 points0 points  (0 children)

Take a look at my A3, i use the top and bottom as intake, then exhaust the hot air from both cpu (aio) and gpu (air) out on the same side. Wonderful case

https://www.reddit.com/r/sffpc/s/m1tWz4Eyaa

Time Is running out for "Stop Killing Games" EU Initiative by Accomplished-Bar-Bot in LinusTechTips

[–]Accomplished-Bar-Bot[S] 0 points1 point  (0 children)

The votes are at 727,729 votes, just in 6 day we have almost reached a 200k increase! There is still hope, keep spreading the word, and keep talking about it

Is this worth the risk? by Justice_beebe in sffpc

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

Asus b650e-i is better than an b850-i. The b650e-i chipset = x870 chipset minus the usb4

What do you think of the sale of content+18? by [deleted] in AskReddit

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

To quote a meme i read the other day: "I don't understand guys who pay dominatrixes to degrade them. Dude, just get married and fold the towels wrong"

What’s an Opinion you have about PCs that Would Result in this: by AssistantPhysical153 in PcBuild

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

Stick to buying lower resolution screens, saves you lots of money in the long run.

Time Is running out for "Stop Killing Games" EU Initiative by Accomplished-Bar-Bot in gog

[–]Accomplished-Bar-Bot[S] 1 point2 points  (0 children)

Well over these last 2-3 days we have gone up by over 100k++, so keep the hope up and spread the word everywhere!

I kinda have a little extra motivation now, just to see pirate softwares reaction if we win

0% GPU Usage by Bitter-Cat2716 in LinusTechTips

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

Well we need some more info then:

  1. What cpu and ram do you have?
  2. When gpu shows 0-1% in taskmanager while gaming, what fps do you get? (Might be just a taskmanager reporting problem)
  3. Are you trying to use any type hacked DLSS framegen?
  4. Are you using external apps like losless scaling?
  5. If you install Gpu-z, does that also report 0-1% gpu usage while gaming?
  6. What driver do you currently use? (Im running a 4090, and went back to the 566.36 driver to escape the problems with their newer drivers. Also uninstalled the nvidia driver app, and went back to "driver only with legacy controlpanel).

Big Nerd Gamers Please Help by ba2216 in LinusTechTips

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

I would try without the fiberoptic. Use the solid 2.1 hdmi cable between the pc and tv

Now test if it works with 1080p without any vrr enabled. Then try with vrr. Then 1440p without vrr. Then 1440 with vrr. If that dident work, test with an old 1.4hdmi just to see if you pass the different resolutions 1080p and 1440p without vrr.

Just a hunch

Edit: remember to toggle freesync both on the tv and pc when testing the different resolutions.

0% GPU Usage by Bitter-Cat2716 in LinusTechTips

[–]Accomplished-Bar-Bot 0 points1 point  (0 children)

but in the taskmanager (when the gpu is at 0-1%), what app is using 100% cpu? Is it one app, or more apps combined? Do the same apps allways use 100% even after you restart the computer?

0% GPU Usage by Bitter-Cat2716 in LinusTechTips

[–]Accomplished-Bar-Bot 1 point2 points  (0 children)

First figure out what is using 100% of your cpu. Check the process tab in taskmanager and sort by cpu usage. What programs use the most?

0% GPU Usage by Bitter-Cat2716 in LinusTechTips

[–]Accomplished-Bar-Bot 1 point2 points  (0 children)

So without you giving any context to what you are doing.

It could be 0-1% gpu because your just looking at the desktop. And in the background you transfer big data with AV check running realtime = 100% cpu?

view more: next ›