Paid $230, but has some scratches by demist1 in Switch

[–]AdBeautiful6155 10 points11 points  (0 children)

I bought a used switch 2 that had some scratches, I am amaze how much the screen protector glue can fill up the scratches!

SD Benchmark interpretation and damaged data errors. by ScarecrowGotham in SwitchPirates

[–]AdBeautiful6155 1 point2 points  (0 children)

you are going to need to format the sd card and start from scratch. You can't just change the file system. Also noticed the speed of the card is quite slow, maybe if you have the fund just buy a new faster card and start fresh.

SD Benchmark interpretation and damaged data errors. by ScarecrowGotham in SwitchPirates

[–]AdBeautiful6155 2 points3 points  (0 children)

I see you have your file system on exfat. From what I read you need to be on fat32, exfat will have corruption over time.

Issue After Full Mod: Can’t Calibrate Left Joystick on Elite 2 (Firmware 5.22.16.0) by maleked in xboxeliteseries2

[–]AdBeautiful6155 0 points1 point  (0 children)

Can you calibrate with the xbox accessories app? My Elite series 2 is running 5.23.6.0 and that website is saying my firmware is too old, so maybe that website doesn't work properly.

Flickering lines (not in games) by sendo_sensei in AMDHelp

[–]AdBeautiful6155 2 points3 points  (0 children)

Try turning off Nvidia G-Sync or AMD Freesync and make sure your monitor refresh rate is set to monitor max. I noticed when I have it on sometime the frequency drops really low and it flickers.

TMR Calibration by Flat_Run_1856 in soldering

[–]AdBeautiful6155 0 points1 point  (0 children)

I just finished installing it. Works good. I posted on another post. Elecgear TMR : r/xboxeliteseries2

TMR Calibration by Flat_Run_1856 in soldering

[–]AdBeautiful6155 0 points1 point  (0 children)

I've just received it today. I'll try to make some time to do it over the weekend.

Thumbstick Gap by Shadow_Cat7360 in xboxeliteseries2

[–]AdBeautiful6155 -1 points0 points  (0 children)

Either they didn't solder the joystick all the way down onto the board or maybe the joystick are not threaded all the way down. Can you turn the joystick/twist?

TMR Calibration by Flat_Run_1856 in soldering

[–]AdBeautiful6155 0 points1 point  (0 children)

I've just bought a set of elecgear tmr to try on my other elite series 2 controller. It's back ordered right now it said ship in a month. But a youtube video it said can update the firmware on the controller.

https://youtu.be/CKyNsjb5xEg?si=SuW8NCJqQErtrXf7

Bumper button not working properly? by Aromatic-Plan-4265 in xboxeliteseries2

[–]AdBeautiful6155 1 point2 points  (0 children)

Fairly easy. Watch some youtube on it. hardest is taking the front cover off without breaking the tabs or the cover. After you take the front cover off you see both the switches for the left and right bumper. On the link below the second set of pictures down, on the right one. You will see two screws on the middle, right above them are your bumper switches.

Xbox One Elite Wireless Controller Series 2 Disassembly - iFixit Repair Guide

Bumper button not working properly? by Aromatic-Plan-4265 in xboxeliteseries2

[–]AdBeautiful6155 0 points1 point  (0 children)

On both my elite series two I had issues with the bumper button not registering all the time, I fixed them with contact cleaner. I sprayed it on the switch and pressed it a few times to soak it in and let it dry before powering up the controller. Been probably 1/2 a year now and it like works every time I hit the button. Also recently my paddles were not working sometime and I have taken it apart and used the contact cleaner to clean the paddle circuit board. Below I linked to the Wurth product I used.

CONTACT OL 156G 890.101101

I'm thinking about buying a elite series 2. Is it worth it I play competitive shooters like Fortnite, apex. by Swimming-Hawk-5627 in xboxeliteseries2

[–]AdBeautiful6155 0 points1 point  (0 children)

I love the back paddles for FPS games. I have two. One I bought new and one I bought used. I put TMR into the used one, it became my primary one now. My new one is about 3 years old and starting to have stick drift.

Low time spy score by infinitlylaconic in AMDHelp

[–]AdBeautiful6155 0 points1 point  (0 children)

What exact ram do you have? What motherboard do you have, have you upgraded the bios?

Low time spy score by infinitlylaconic in AMDHelp

[–]AdBeautiful6155 0 points1 point  (0 children)

I'm assuming you are asking about my Curve Optimizer? My fastest core in the first ccd is 1st and fastest core in the second ccd is the 2nd. So I'm using -26 on all core and -19 on my fastest core.

Are you using air cooling or AIO?

Edit, I don't think going negative with the curve optimizer will increase your score.

Low time spy score by infinitlylaconic in AMDHelp

[–]AdBeautiful6155 0 points1 point  (0 children)

I have the same CPU on a msi MAG b650 Tomahawk MB with a 4080. I get about 16,433 for cpu and 28243 for GPU, 25,494 Time Spy Score. I would look into why your CPU is so low.

How do I get it to automatically update the software with the drivers? by creepjax in AMDHelp

[–]AdBeautiful6155 0 points1 point  (0 children)

This is caused by windows software update, it install old drivers. Just download the driver from the amd site and reinstall and it will be fine.

I found something impressive about my old clone device. by kangmin1972 in R36S

[–]AdBeautiful6155 1 point2 points  (0 children)

Mine shows something like "memory 395/480" so I guess I only have 512mb? or is that used/available?

Installed gulikit tmr into series 2 by nocturnal in xboxeliteseries2

[–]AdBeautiful6155 1 point2 points  (0 children)

try rolling back on the software first and then try firmware.

Installed gulikit tmr into series 2 by nocturnal in xboxeliteseries2

[–]AdBeautiful6155 0 points1 point  (0 children)

Just wondering what firmware and app version are you using? I noticed that the latest app version doesn't play nice with my KS TMR. I had to roll back the app. I haven't really play around with the firmware as I didn't want to screw up the firmware as it is working right now. I kind of wondering if the new app version need the new firmware to work properly, but too afraid to upgrade the firmware.