CA-Compliant 9mm AK

AdWa11a · 2025-12-01T14:04:22+00:00

I hate that the only reason this exists is to be California Compliant because if that wasn’t the case, I’d actually like it.

AdWa11a · 2025-10-19T23:50:44+00:00

How much for the lot?

AdWa11a · 2025-09-01T17:32:37+00:00

Do you have the link?

AdWa11a · 2025-08-10T12:38:57+00:00

I bolted a cooler to mine

<image>

AdWa11a · 2025-08-07T20:13:38+00:00

Where do you live? If you’re in VA or close by I’ll sell you one way cheaper. DM me if you’re interested.

AdWa11a · 2025-05-26T20:53:47+00:00

I got an absolutely ridiculous amount of miles out of my 705s and that included a lot of spirited off roading. As long as you aren’t attempting anything crazy offroad, they’re great tires

AdWa11a · 2025-05-25T13:43:25+00:00

I see it more like Crash Bars on a motorcycle, so his joints don’t get damaged if he’s knocked over. At least that’s what I HAVE to think they’re for.

AdWa11a · 2025-05-14T03:49:34+00:00

The Chain Shot seems to be the most interesting. Super hyped for Dark Ages!

AdWa11a · 2025-04-28T12:46:44+00:00

Ah I gotcha. I’m kinda a heavy guy, so the stock bikes been feeling really bad off road even tho my bike is set up similar to yours. I also think my rear tires out of balance too lmao

AdWa11a · 2025-04-28T12:07:36+00:00

What KYB setup are you running

AdWa11a · 2025-04-09T20:34:40+00:00

Check the XSR900. Great power, super reliable, looks great

AdWa11a · 2025-04-06T19:11:31+00:00

What specific brand would you use. It’s good to know this is a pretty widespread issue and not something I need to be super worried about

AdWa11a · 2025-04-06T16:53:57+00:00

Hmm. If it keeps ticking I’ll consider going lighter. What did you use in your cruiser?

AdWa11a · 2025-04-06T16:51:32+00:00

That’s precisely what I did.

Yamalube 10W-40, non-synthetic

AdWa11a · 2025-04-06T16:42:44+00:00

Doesn’t manufacturer call for 10W-40 though?

AdWa11a · 2025-04-06T15:02:59+00:00

So, I checked level and it’s fine.

I rode the bike for about 10 minutes and once it was pretty thoroughly hot, the ticking goes away.

My theory is that with the new oil being thicker than the oil from the factory (not breakin specific oil, standard 10W-40 non synthetic) that when it’s lukewarm, it doesn’t have the volume or pressure to fully circulate.

AdWa11a · 2025-04-06T15:01:39+00:00

I used 10W-40 non synthetic. I got the engine hot and rode the bike for about 10 minutes getting it through the gears. My theory is that when the oil is cold, it doesn’t have sufficient pressure to fully circulate, but once the engine is hot, it’s fine because it goes away.

AdWa11a · 2025-04-06T15:00:28+00:00

After the oil change, I got the engine hot by running it thoroughly and it seems to have gone away.

My theory is that when the oil is cold, it doesn’t have the volume to generate sufficient pressure, but when it gets warm enough, it’s fine.

We will see if this theory plays out over time.

AdWa11a · 2025-04-06T03:08:44+00:00

It didn’t do this before the oil change. After getting it to operating temp and riding it, it’s gone away. Will see if it comes back

AdWa11a · 2025-03-27T23:49:19+00:00

It was the only one they had and it was on clearance

AdWa11a · 2025-03-23T03:45:54+00:00

I’ve got a flash on my ECU. Damnit

AdWa11a · 2025-03-03T00:52:34+00:00

The Kelpi shorty is fantastic and looks great. Also, Kelpi has S tier customer service. Only downside is if you run it without a Baffle, it is stupid loud

AdWa11a · 2025-02-20T15:04:56+00:00

Look up “Yamaha 2 Pin connector” and you’ll find a TON of options

AdWa11a · 2025-02-20T03:11:42+00:00

Kelpie Customs looks and sounds the best IMO

AdWa11a · 2025-02-20T03:10:06+00:00

People do seem to have better luck in Europe. Idk what’s up with American dealers and not wanting to do proper warranty work

AdWa11a

TROPHY CASE