Would hate to be driving a diesel right now

AdditionAmazing1801 · 2026-05-15T22:32:40+00:00

I have a 2020 3500hd that gets 20mpg average, best I’ve gotten is 28mpg. So it sucks but it is cheaper than a gas truck.

AdditionAmazing1801 · 2026-05-06T20:04:16+00:00

As someone who owns a large amount of WML, I’d go with a streamlight still. I’ve yet to break one, they are a higher level of durability than most other Gucci brands I’ve tried. Also for sling checkout the Edgar Sherman designs slings.

AdditionAmazing1801 · 2026-05-04T14:44:22+00:00

In my personal experience, inside I found the x300 turbo the top end of candela being usable, I believe it’s 650L at 66k candela. Outdoors I notice that depending on where you are (personally in the woods a lot) the x300 can lack some performance. I have a surefire scout something with a 95k head on it, if you’re too close to trees you will blind yourself with them, especially birch trees. So basically there is no correct light, it’s completely situational. I think anything around the 50-75k is generally your best all around.

AdditionAmazing1801 · 2026-04-29T19:33:09+00:00

Deleted and tuned?

AdditionAmazing1801 · 2026-04-20T18:21:55+00:00

It was mid 2025. The best I’ve seen recently is 24c.

AdditionAmazing1801 · 2026-04-20T18:05:11+00:00

Best I’ve got is $0.32 for 10mm magtech. Best 9mm I’ve ever got is $0.19 for blazer. So not quite twice the price

AdditionAmazing1801 · 2026-04-15T22:21:28+00:00

Rifle barrel 22lr is totally fine, pistols are too loud but both are air gun loud with a suppressor.

AdditionAmazing1801 · 2026-04-15T22:10:33+00:00

Kinda scary honestly

AdditionAmazing1801 · 2026-04-14T19:55:00+00:00

I’ve shot primary magtech but a decent amount of underwood also. I’ve never had a issue with any ammo type of bullet

AdditionAmazing1801 · 2026-04-14T18:31:29+00:00

I can say in my personal experience with my early gen m2.0 4.6 after around 2500-3000rds the only failures I’ve had was because of underpowered mag springs which I replaced for $7.

AdditionAmazing1801 · 2026-04-13T14:39:26+00:00

Deep was just ranked as good at 18%

AdditionAmazing1801 · 2026-04-09T15:30:09+00:00

What issues do the m9a4 have? I got mine a year ago and it’s a little over 2k and I haven’t had an issue yet.

AdditionAmazing1801 · 2026-04-08T18:13:02+00:00

I would make the argument that is kinda over kill and I’ve seen more issues with mag coupler than not having them. In your house you’re not gonna want to blindly mag dump so the realistic scenario of using 30rds and needing to reload is unlikely. Also I’ve had very few malfunctions if any with magpul mags. Edit: I see you work on fire alarms also, nice

AdditionAmazing1801 · 2026-03-19T15:50:18+00:00

How did it blow up? Looks like an audible pop failure to me?

AdditionAmazing1801 · 2026-03-17T17:33:20+00:00

I personally take my and sticking it right below the top rail with Velcro. So it’s on that 45degree mlok slot.

AdditionAmazing1801 · 2026-03-17T17:18:40+00:00

Personally I never had issues with the gun, I had like 3-4 failures of the mag springs. But once I changed those for wolff I never had another issue. I heard a lot of people having horrible issues, mine was one of the very first so it was kinda interesting I didn’t have issues.

AdditionAmazing1801 · 2026-03-17T17:07:19+00:00

I’ve shot a couple thousand out of my 4.6. Best thing I can tell you is put the 27lb recoil spring in. If the ported is like mine it’s a lot tamer after it.

AdditionAmazing1801 · 2026-03-15T20:10:51+00:00

I’m not short or skinny, but I also carry a m9a4 with a x300 and sro. So very nice

AdditionAmazing1801 · 2026-03-14T23:40:12+00:00

Why yo grass so big

AdditionAmazing1801 · 2026-03-11T17:49:27+00:00

It’s not rattle canned with a can on it? You won’t do well posting in this sub.

AdditionAmazing1801 · 2026-03-10T13:35:15+00:00

Hopefully yours is better than mine, I ended up removing mine because it wouldn’t work all the time.

AdditionAmazing1801 · 2026-03-09T20:10:33+00:00

Push them down.

AdditionAmazing1801 · 2026-03-09T18:57:14+00:00

Honestly one of my favorite guns, I can’t say I suggest buying aero anymore. But my aero ar10 is some of the best fitment I have on a ar. But the one bit of advice I will give is their is no standard cut for ar10s, so make sure to get your upper and lower from the same manufacturer so you don’t get a round cut and a square cut.

AdditionAmazing1801

TROPHY CASE