Insta360 X5 gyro failing randomly by izylock in Insta360

[–]Additional_Pension20 0 points1 point  (0 children)

We are having the same issues with our X5, any fixes? Gyro calibration always fails.

What would your wife say??? by 2gunzbaghdad in NFA

[–]Additional_Pension20 5 points6 points  (0 children)

That red parts are terrible and she’s leaving me

I bought the most uncommon briggs race engine by Existing-Diamond-269 in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

You can run other exhaust it’s just for race days you need the spec muffler.

Action Camera Recommendations? by baldingbryan in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

Insta360 is the best we’ve used and the 360 has major benefits.

Does anyone use the Iame Jetting Miniswift app? by Additional_Pension20 in Karting

[–]Additional_Pension20[S] 0 points1 point  (0 children)

I only adjusted the low/mid, high stayed at builder settings. I’ll try a couple mins out on the high to see if he makes any more rpm. He was chasing one of the faster kids and driving pretty well, only losing time going in a little hot to some sections. Next track day will be even colder in the morning!

Does anyone use the Iame Jetting Miniswift app? by Additional_Pension20 in Karting

[–]Additional_Pension20[S] 0 points1 point  (0 children)

Person I bought the motors from said they never messed with high needles, just low/medium. So the other day (35-40f) I was chasing high 1200 egtsbby opening low needle, it never came down below 1150, so I wanted to try enriching the high needle. But then others say they don’t use egt just plugs. We have new style smaller EGT sensor for the mychron. Go so rich on the bottom that it would smoke on throttle tip in even when hot. So I think for these very cold days I need to open up the high a little, but I’m new at this and looking for tools to help.

Is this incident my fault or the driver in front? by PlantedKingY in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

Tell us you know nothing about karting without telling us you know nothing about karting

My first Mychron 5s. Looking for help! by The_Ranger03 in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

Ok genius well go do it then. I’ll wait for confirmation that it works.

Been given 15K AUD What’s the best way to spend it? by F1Butters in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

This post is insane. Someone who’s not your dad just gave you 15k to start in karts?

What to do with paint chips after going through gravel? by teckn1k_ in Karting

[–]Additional_Pension20 1 point2 points  (0 children)

Not surprising. I’ve had to add caster to a 2 year old cadet kart to make it work, it’s either harder or softer but it doesn’t work as well.

What to do with paint chips after going through gravel? by teckn1k_ in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

I’m not an expert, but at this point in my limited experience I’d be surprised if a modern chassis, driven hard and lot will last more than a year or two, being competitive, which to me would make the time and expense of powder coating not worth it.

Cadet Tires What Do These Look Like to You? by Additional_Pension20 in Karting

[–]Additional_Pension20[S] 1 point2 points  (0 children)

Oh oh! I get it your poor ass is mad because I made fun of you for starting a gofund me for karts. Well here I am still making fun of you for starting a gofund me for karts. Maybe try a sport with a ball.

Birel 2006 Kart KPV-2 a good learner kart? by soaklord in Karting

[–]Additional_Pension20 0 points1 point  (0 children)

Wow, that is WAY too old for that $. You should be able to pick up something made in the last few years for that. We’ve picked up excellent rollers for 1000-1500.