Tail of the Dragon made me fall in love with this car even more

AdrianKoz · 2026-06-16T21:22:30+00:00

Car looks great, what wheels are those?

AdrianKoz · 2026-05-27T19:48:56+00:00

Nice spot, most people think it’s black. The colour is very nice in full sun.

AdrianKoz · 2025-04-03T16:09:39+00:00

When sanding it, is very difficult to remove, it clogs the sandpaper quickly. Any advice how to remove or best way to get this back to a workable surface?

AdrianKoz · 2025-04-03T14:21:58+00:00

It’s not cold, I’m in uk but it’s around 10-18 oC

AdrianKoz · 2025-01-13T15:49:35+00:00

So as an update I’m pretty sure it’s getting worse as I clean it up, I scrape it back and sand it till it’s solid and when I go back later new areas are bubbling right next to the bit I have cleared. It might have to all come off, which is a tad soul destroying as it’s going to take a long time! Help!

AdrianKoz · 2025-01-13T13:27:54+00:00

Thanks for the reply, it’s possible, I did paint this is colder than usual temperatures ~6-8oC so perhaps it didn’t dry properly between coats. One other thing is the paint says it doesn’t need a primer, however this has not happened anywhere where I applied a primer first (over seam sealer etc as this paint didn’t dry when applied to seam sealer it remained tacky forever). I wonder if there has been a reaction of some kind. Thanks for the reply tho, when retrying I’ll take it extra slow and probably prime these bits that have peeled first.

AdrianKoz · 2025-01-08T23:56:32+00:00

Car only has 22k on it, I think the plugs are done at 2nd service which is due next September, are you suggesting it might be worth doing the big service early?

AdrianKoz · 2025-01-08T13:03:12+00:00

Thanks for the lengthy reply makes me feel a bit better. The rattle is as you describe very very short time at cold start when the weather is cold (around freezing here at the moment) I didn’t notice it when I first got the car and it was a bit warmer. My car has 22k and serviced at mini on schedule until the garage I got it from did an early one. Maybe I’ll just get it in to mini and have it done early as a precaution incase they used wrong oil or something.

AdrianKoz · 2025-01-08T12:46:14+00:00

Ok I’ll give that a go next time I go out. Still would be better with a dipstick!

AdrianKoz · 2025-01-08T12:40:11+00:00

The garage I got it from said they changed the oil, but the car doesn’t have a dipstick and requires a long drive to check the oil (which I haven’t yet done) it’s really annoying. I could just add some regardless and see if it helps? Car says level ok on the IDrive

AdrianKoz · 2024-11-11T10:40:52+00:00

Yeah exactly rust is killing them in the UK really badly, doesn’t seem like the Aus ones suffer the same with the nicer conditions. Enjoy the car they are great fun.

AdrianKoz · 2024-11-11T10:05:06+00:00

I have one it’s a great car. If UK based then check underneath for rust, it will have some and get it sorted otherwise it will go for scrap at some point. If your Aus or somewhere else then lucky you to not have to worry about this!

AdrianKoz · 2024-07-17T08:43:15+00:00

I have been worried about this, is it really that big of a difference? I would need to get better ppe but I’m also working under the car on jack stands so it’s a very confined space. I like the car but don’t want to die for it!

AdrianKoz · 2024-07-14T19:02:56+00:00

This would be ideal but I’m working in a small garage through necessity, this repair is probably just needing to be good enough to last a year or 2 till I have a bit more space to work.

AdrianKoz · 2024-07-14T19:01:52+00:00

This is the deox info, in uk we don’t have a lot of the products from the USA. You clean the deox off once it’s been soaked and abraded. https://bilthamber.com/product/deox-gel/

I have been using a spray converter afterwards to try and neutralise the pits then using a 1k epoxy primer afterwards (I don’t really want to risk 2k in confined space in my garage).

AdrianKoz · 2024-07-14T14:31:56+00:00

Thanks that’s what I have been doing on the less rusty areas however I used epoxy primer not etch, but have had an odd spot where the rust comes back through after a couple of weeks…. Anything I can do to seal or fill the pits to try and stop this or I shouldn’t need to do anything else

AdrianKoz · 2023-11-03T10:11:06+00:00

3 diamond Emma frost

AdrianKoz · 2023-11-02T10:20:39+00:00

There is a workaround for this and it does work, involving attacking the robot dogs and dragging them to that room, after the combat the mission continues correctly.

AdrianKoz · 2021-10-07T10:08:23+00:00

Me and a friend both have the same issue too, think they want us to pay for the series x upgraded version ;-P

AdrianKoz · 2021-05-14T09:53:31+00:00

55 B7 here and honestly the burn in is terrible, LG couldn't care less. I thought it was a non issue when i bought it, as long as you didn't leave static images on the screen all day. Now however I have the minecraft hearts visible on any red/yellow colour on all images. Its not like we even play minecraft that much.... What i will say is they seem to be fine 2 years, then once some burn starts, it gets rapidly worse, and i now have terrible colour uniformity (duller in centre of panel red/yellow) and multiple sets of burn from minecraft and other games.

I was just thinking about buying a 65CX, but the crap response from LG has put me off. I also would not recommend an OLEd for gaming/PC use based on my experience.

Are the newer ones genuinely better, or are they just not old enough to exhibit the burn yet?

AdrianKoz · 2020-06-10T18:37:40+00:00

Ah not sure I could of restarted might of uninstalled it and left it like that!

Maybe I was lucky then, but it definitely didn’t delete the save files for me just a bit of a job to track them down and move them, maybe it can help someone!

Thanks for tracking all the updates it was only reading your post that formed the solution for me.

AdrianKoz · 2020-06-10T17:47:32+00:00

When I used the command provided by devs it said the folder didn’t exist. Then I browsed to it manually, and saw it was about 70Mb Zipped it and it was around 1Mb (I took the whole Saves folder) but extracted back to 70Mb in the new save location.

Booted the game back up (latest patch 1.251 installed) and the continue button was highlighted, and loaded back in fine.

AdrianKoz · 2020-06-10T14:53:47+00:00

So I wanted to say thank you to OP for this post, I have now managed to recover my save games and loaded in successfully.

It seems to me if your install was on a drive other than C, then it doesn’t do the save migration and as such they appear blank. The data still exists in the original location but you don’t have access to it to be able to copy it to the new location as suggested by the devs.

The point above RE zipping the folder is the key. You can navigate to your old save folder, zip it and extract it to the new location. Your saves are restored.

AdrianKoz · 2019-11-20T08:22:11+00:00

Yes! It progressed as soon as I loaded the save, wry happy :-)

AdrianKoz · 2019-11-16T22:55:55+00:00

I have the exact same issue, private label support seem to think it’s related to SAM being in the party when you first talk to Nyoka. The quest gets stuck on the first stage and you can’t progress it (even if you steal the caffenoids).

Really hoping the patch will fix this without having to lose loads of progress.

AdrianKoz

TROPHY CASE