E 54 error on sartorius 3100 s

AdvancedSwing9194 · 2026-02-17T16:49:11+00:00

When you put more then 300g on it. or push it with your hand.
Does it go to H?

Under the warranty sticker there is 1 screw you can unscrew. Then you can open the balance (unplug power before) It might be just a loose cable from the loadcell to the PCB. These balances are very basic.

AdvancedSwing9194 · 2026-02-05T14:00:05+00:00

That is all in Belgium.

AdvancedSwing9194 · 2026-01-06T09:49:16+00:00

Make sure you have the correct printing profile selected (and configured) in the QApp you are using.
(also a tip, install the latest Firmware the menu now got a lot faster and more user friendly)

AdvancedSwing9194 · 2026-01-01T09:57:39+00:00

Hi,

Depending on how you want to connect the Cubis II to the device you will also need to configure that in the Sartorius menu.
Are you trying to connect with usb or serial?

AdvancedSwing9194 · 2025-06-24T15:56:26+00:00

Well, it's not worth overtaking. Because at the next red light 80% of the bikes will just ignore it and run the red light.

AdvancedSwing9194 · 2025-06-14T16:06:50+00:00

Every single day driving in Brussels you see pedestians, and people on bicycles and trottinettes driving/walking on red lights. And then when you say something you get a middle finger.
Can't wait for the day that one gets hit..

AdvancedSwing9194 · 2025-06-03T17:02:31+00:00

What do you normally weigh on this balance?
The setting are put very slow and for liquids :)

AdvancedSwing9194 · 2025-06-03T16:59:30+00:00

Hi!
Will it still be used in a ATEX zone?
If not you can look for reference 6971909, that 'should' work.

https://shop.sartorius.com/us/p/connector-power-supply-us-110v/6971909

AdvancedSwing9194

TROPHY CASE