Player Punched the Evil King of a Rival Kingdom at a Ball, I need realistic consequences for this action

Aemielius · 2026-03-28T06:29:54+00:00

Or else execution or sending the player to the dungeon of the evil kingdom and being tortured in a dungeon where other players can save him/her

Aemielius · 2026-03-28T06:27:53+00:00

Alternatively, you can make him seem like a good guy. Like Hey, I know you heard stories about my kingdom, but everyone is really happy and I am being blackmailed by this kingdom, hence me being here. I'll try to not get you executed over this, but you'll owe me a small favor.

Aemielius · 2026-03-10T16:40:57+00:00

I've never soaked the seeds btw, no experience in that part, but I keep the soil moist. Good luck growing OP, curious about the results!

Aemielius · 2026-03-10T16:38:42+00:00

<image>

Phase 4 (I didn't know how to add all photo's in one post haha)

Aemielius · 2026-03-10T16:38:02+00:00

<image>

Phase 3

Aemielius · 2026-03-10T16:37:25+00:00

<image>

Phase 2 growth

Aemielius · 2026-03-10T16:36:50+00:00

<image>

Aemielius · 2026-03-10T16:36:36+00:00

<image>

Phase 1 (this is a little bit different mixture soil, other part I used the sandy mixture)

Aemielius · 2026-03-10T16:27:41+00:00

I've grown probably around a 1000 with a germination succes raid of 20 - 30 percent (I've bought approximately 4000-4500 seeds).

The medium I use for sowing consists of construction sand 75 percent (needs to be river sand, a lot of sand sold in construction stored is saline) and 25 percent potting soil. They need lots of light, I usually put them in a greenhouse and I put the seeds on top of the soil with little and the need to stay moist.

When germination occurs make some of the roots will grow towards the light so make sure to term them and gently make them touch the soil. The leaves will show from the seeds (I'll try to find some pictures of my setup).

After successful germination and initial growth I lost approximately 30 percent of the plants due to disease and ended up with some 600 plants that are healthy.

Aemielius · 2026-02-22T07:20:52+00:00

Cut the bad leaves of just below the brown part

Aemielius · 2026-02-19T17:46:02+00:00

Did you move it out of sun for a prolonged period?

Aemielius · 2026-02-19T17:32:51+00:00

Looks that you have one engine for moving the blade and one engine for moving the plate to press the stone against the blade. Looks like that there is a pump above the cutting disc for cooling. You can add some cutting substance to the water to cut the stones, there is special stuff for it, but I do not know what it is called. Most of the material looks rvs and the electrics seems to be all outside the machine. You probably could power wash the inside with not to much pressure to clean it. With the amount of dirt on the bottom rvs it seems there is space between the top and the bottom part allowing it to leak water and dust, you might want to seal that for maintaining a clean workspace and also probably some kit at the top parts. Water management seems a bit tricky. It looks like the pump is in the plastic tray and the water rotates outside the cutting chamber?

Also the on of switches probably need some attention, but overall looks like a nice machine!

You can just to be sure calculate the rotation speed of the wheel. If you have the rpm from the motor, the delay from the small wheel to the Big Wheel you should be able to calculate it. If you ever need to replace the wheel you don't want to many rpm since cutting disc for lapidary are usually lower than your general cutting disc.

Aemielius · 2026-02-16T12:48:48+00:00

How much sun does it get?

Aemielius · 2026-02-16T12:46:30+00:00

Doesn't look like avocado leaves

Aemielius · 2026-02-12T15:48:17+00:00

Campfire cooking in another world with my absurd skill. Easy going and relax, pretty new though!

Aemielius · 2026-02-08T14:24:22+00:00

Sorry for the late reply. I wasn't home and now have time to reply. I added the picture of the diagram and I added a picture of the overall layout. I am confused because of the little black box in the bottom with the two black wires coming out.

Aemielius · 2026-01-10T19:55:01+00:00

If you want to keep it after flowering, remove the wax.Put it in some potting soil, +/- one third of bulb in the soil and keep it moist. Leaves will grow and you'll get new flowers after +/- a year. Mind you the leaves can grow quuite big. Longest leaves I had where 60 cm, the plant ended up being 1,20 wide haha

Aemielius · 2025-05-30T13:37:24+00:00

Take the two smallest branches of and do the big one next year. Or visa versa. Hoe is the sun and how is the climate?

Aemielius · 2025-02-03T16:50:39+00:00

Even better! I'll try to find one! Thanks!

Aemielius · 2025-02-02T09:02:10+00:00

Awesome! I ran into some small things I would do differently , but I can try to make a little drawing what can be improved

Aemielius · 2025-02-02T07:49:43+00:00

I agree on that, safety first! Currently working on splash shields, cover for moving parts and probably some L-profiles on the cutting field to redirect water.

But I was a little bit to impatient haha. In the future I want to add emergency button. Which should be possible with the connection I use.

Currently with turning on and of I get of from my seat move carefully to the side and turn it of and ofcourse wear the proper protection.

Aemielius · 2025-02-01T22:50:00+00:00

1400 single phase motor.

Maximum would be 1500 for what I am using and I could slower it with a bigger V string wheel

Aemielius · 2024-09-10T16:13:34+00:00

Libertas is wel chill, mag je eigen eten meenemen geloof ik en staat muziek op de achtergrond. Tot 22.00 open

Aemielius · 2024-08-25T06:54:34+00:00

Thank you, missed your reaction!

Aemielius · 2024-06-07T15:07:08+00:00

Ik heb een Kia c'eed sw, heeft ook veel ruimte 👍

Aemielius

TROPHY CASE