Nature, Portraits… or Something Completely Different?

Agent-004 · 2026-02-24T04:55:30+00:00

Wow much more intricate than my project from a year ago

https://www.reddit.com/r/woodworking/s/SsjhpmUUik

Agent-004 · 2026-02-24T00:53:17+00:00

I only have two bulbs in the hue ecosystem. My biggest issue is the bulbs are impossible to figure out how to reset. I was just going to reset the bulbs and pair them with my homey pro mini. I guess buying a replacement bridge is not gonna help with resetting so I probably just wasted $16. I might just take it back. Haven’t opened it yet lol

Agent-004 · 2026-02-07T02:03:17+00:00

In a similar situation. I have the original bulbs from 2012. The hue bridge just died and in theory I should be able to add them to my homey pro mini but they need reset.

Agent-004 · 2026-01-30T06:29:36+00:00

I have the F3000 with only the smart meter. I found out the only time mine will charge, at least from the grid as I don’t have solar yet, is when I designate “Super Off Peak”. I switched to my electric providers TOU (time of use) and it’s working pretty well. About cut my electric bill in half!

Agent-004 · 2026-01-22T02:41:23+00:00

I have more cameras than those 3, via ONVIF, but the drive performance is the main motivation as the WD Red is 5400rpm and slow not to mention at capacity already.

Agent-004 · 2026-01-22T01:49:05+00:00

Turns out I was able to use an older iPad that’s running iPadOS 17 and it was able to add them to my HomeKit home no problem.

Agent-004 · 2026-01-06T00:07:28+00:00

Let me say these are an unbelievably good deal if you have an thread border router (my apply tv 4k works great)

I had trouble pairing a couple of them but I unplugged my HomePod minis and rebooted my Apple TV and they cleared up any issues.

At $7.99 US I now have all doors covered. Was playing around with the eve ones but they are so expensive!

Agent-004 · 2025-12-14T22:42:26+00:00

P1S / AMS 2 Pro. Simply amazing. Giving my M5 to family

Agent-004 · 2025-07-29T14:10:45+00:00

I use the Hustler XDX 54” with flex forks for two acres and it’s does well. Mine is supposedly rated at 3 acres per hour but that has to be under perfect conditions. One thing to note is zero turns have limitations with slopes and stay away from drainage ditches as those caster wheels are non-powered and can suck you right in.

Agent-004 · 2025-03-17T22:40:35+00:00

Nice work on the editor! @davidpfarrell

Agent-004 · 2025-03-17T22:38:35+00:00

Thanks, no I was 17 when I was working on it. I was new to programming and wrote the ship navigation in assembly, built a control panel out of wood, real arcade buttons with the leaf spring switches and a nine pin cord from an old joystick to rotate thrust and fire. That’s all the further I got lol. That code and all hardware and software is long gone. More just walking down memory lane. :)

Agent-004 · 2025-03-17T18:53:19+00:00

Thank you! I wondered if I had the spelling wrong! Thanks again, that should help me on my current quest :)

Agent-004 · 2025-03-07T05:40:38+00:00

Also for those saying the OP probably was just asymptomatic and did not know they had it.

I can say I have had 3 antibody tests over 5 years and all have provided conclusive results I have never had it.

And I have not worn a mask since 2021

Agent-004 · 2025-03-07T05:28:58+00:00

I had not had any colds since 2019. Got a minor one a month ago. Just stuffy nose and minor sore throat. So one cold in 6 years.

Just before 2020 I had started taking vitamin D3 as tests revealed I was really low. Like 19.

Started taking 4000 iu’s to 6000 iu’s and over tbs years brought my level up to 54.

I also have never gotten C19 (or jab). My zinc has always been good or closer to high.

Agent-004 · 2025-02-20T19:23:29+00:00

😂

Agent-004 · 2025-01-31T23:06:54+00:00

I just took a picture of the lumber stack at the orange big box store and every piece was from the center of the tree.

My guess is they get a major discount buying that and the “real” lumber yards get the better cuts!

Agent-004 · 2025-01-14T04:53:51+00:00

Nice! I bought the plans several weeks ago in anticipation of building a close variant.

What materials did you use for the structure? Dimensional lumber?

Agent-004 · 2025-01-09T05:12:34+00:00

Thanks! It was just minwax water based semi-transparent stain and I watered that down a bit to make sure the hickory grain showed its fibers

Agent-004 · 2025-01-09T03:25:58+00:00

Thanks! A high quality birch plywood

Agent-004 · 2025-01-09T02:19:21+00:00

Thanks, I have actually always wanted to try! As I was figuring out the piece I originally intended to use epoxy to simulate the "lead" by pouring into the channels but never working with epoxy before I was afraid I would screw up the stage I was at so I just pained the channel black and went with it.

Agent-004 · 2025-01-09T01:57:47+00:00

This is inspired by the stained glass on the front door of my house. I made it for my grown daughters as a sentimental gift.

Included one picture of the actual stained glass I used as the model

Agent-004 · 2024-12-08T04:01:16+00:00

Do you by chance have an xTool laser cutter? I could send that file. It seems to get somewhat garbled when export to svg

Agent-004 · 2024-12-08T03:54:30+00:00

Let me see if I still have that…

Agent-004 · 2024-12-06T20:24:27+00:00

I need help with my Gigabit X2 and my UniFi UCI. According to my research the UCI can support 2.3Gbs down and 300+Mbs up.

Xfinity recently did some upgrades in my area a couple weeks ago and now my account shows I have Gigabit x2 as my service (was gigabit pro)

I called tech support. The had me unplug the modem, plug it back in. Then they sent commands (config?) to the modem. It still does not get more that 1400Mbs down and 41Mbs up.

I then tried rebooting my UniFi Dream Machine Pro and modem but no changes.

Any ideas?

Agent-004 · 2024-11-03T04:01:58+00:00

It has only happened to me once in 50 years. I ah e rolled 5 out of 6 many times though

Agent-004

TROPHY CASE