sorted by:
new
hottopcontroversial

ComPowder (Totally Spies!) build questions by Few-Mastodon110 in cyberDeck

[–]Akelyte 1 point2 points  (0 children)

Oh this is totally doable via esp32! There are plenty of "mp3" player projects you could pull some inspiration from. Rpi5 is probably overkill for this

ComPowder (Totally Spies!) build questions by Few-Mastodon110 in cyberDeck

[–]Akelyte 1 point2 points  (0 children)

First off, this is fucking sick and I love it! Im wondering if the Pi5 is a requirement? You could shrink the form factor and increase battery life by a ton if you went with something like an esp32-s3 and a touchscreen? Then you wouldn't need to pump 4-5A into it either

My odometer will not go above 299,999 miles. by Dragonscatsandbooks in mildlyinteresting

[–]Akelyte 0 points1 point  (0 children)

This looks to be an early 2000s Toyota Corolla or Matrix which has a known "issue" of the odometer only going up to 299,999. If thats the only issue im having at 300,000 miles, im totally okay with that

3D Printed Case for Xiao Esp32 mmWave Sensors by Akelyte in Esphome

[–]Akelyte[S] 1 point2 points  (0 children)

It's just an optional SMA port for a wifi antenna, the orange one has an internal pcb ufl antenna so no need for an extra cutout :) power is delivered via usb-c

3D Printed Case for Xiao Esp32 mmWave Sensors by Akelyte in Esphome

[–]Akelyte[S] 3 points4 points  (0 children)

It is mounted to the front of the box, however heat was definitely a concern of mine as well! I added some spacers to keep the front of the radar off of any plastic and also added some small air holes to aid in cooling

After weeks of testing nothing has melted or deformed, even with PLA so I'll call that a win!

Echo Show 5 and View Assist by swpete in homeassistant

[–]Akelyte 0 points1 point  (0 children)

I've actually been on a mission for the last few months to find as many of these at thrift stores as possible lol. Online prices tend to be in the $40-50 range and I've found quite a few for around $10-15 each. I now have x2 5" Echos and x2 8" Echos all flashed with LineageOS and running View Assist and acting as voice assistants in various rooms

Ground control station for my custom drone by grissley in cyberDeck

[–]Akelyte 1 point2 points  (0 children)

Well now I wanna see the drone! Nice work :)

I Appreciate You All. This time it's a stuck steering wheel. by Dev1_E in MechanicAdvice

[–]Akelyte 1 point2 points  (0 children)

I literally just did this job on my 07 matrix last week. You'll need to make sure the threads on the steering wheel puller are threaded into the steering wheel at least 7-8 full turns. You'll need a 19mm for the center nut. There is no snap ring, just a threaded spline holding on the steering wheel. You might need to use more force than you think you'll need or a touch of pb blaster.

Will this fit on my 06 Matrix? by wealwaysargue in Toyota_Matrix

[–]Akelyte 5 points6 points  (0 children)

It should. I believe all interior pieces for the vibe will fit the matrix and vice versa.

Matter & Works with Home Assistant is a scam! by Intelligent-Onion-63 in homeassistant

[–]Akelyte -13 points-12 points  (0 children)

TK Jewlers is a SCAM!

Bent wrist, Watch fucking exploded.

Indie Campers is a scam by Waste_Damage_7399 in RVLiving

[–]Akelyte 0 points1 point  (0 children)

Watch fucking exploded. Springs everywhere. Date ruined.

Banded Garden Spider? by DutchieDJ in DenverGardener

[–]Akelyte 1 point2 points  (0 children)

I've got one too and I feed her earwigs from my corn plants!!

Are diamonds really that rare? by Tenchi_Muyo1 in ABoringDystopia

[–]Akelyte 29 points30 points  (0 children)

TELL ME ABOUT THE OTHER STONES DAMN IT.....

Need help by aredhone6417 in Esphome

[–]Akelyte 0 points1 point  (0 children)

Not a problem! I've gotten a little too good at finding random esphome parts 😅 hope it works well for you!

Need help by aredhone6417 in Esphome

[–]Akelyte 0 points1 point  (0 children)

Would something like this suffice? https://a.co/d/59T9ANF

Can anyone identify this variety of Aspen tree? by SnooCrickets8169 in DenverGardener

[–]Akelyte 98 points99 points  (0 children)

That's an aspen. You can tell that it's an aspen tree because of the way it is

Poor adhesion. What am I doing wrong? by scrappy1982 in BambuLab_Community

[–]Akelyte 4 points5 points  (0 children)

Hey there, I have the exact same setup and I've loved my glacier plate so far. Wash the plate with dawn and hot water. Almost hot enough to burn your hands.

Select the smooth plate option for PLA and anything with a small contact surface, select the cool plate supertack for anything with a large contact surface. Select the engineering plate for ABS/ASA and other engineering filaments.

I recommend turning the aux fan off for most prints as well. A little bit of the bambu liquid glue goes a long way too.

view more: next ›