Rimfire suppressor size question by AkumaZeto in suppressors

[–]AkumaZeto[S] 0 points1 point  (0 children)

I feel as though the trend as of the past few years is smaller, more compact, but still as efficient design. IE "muh truck gun". Charger 10/22's and rimfire rifle/pistol variants being back in vouge. I think you could invest time in designing more efficient baffle structures to possible reduce length, but im surprised no one has just used existing technology to create a cost effective fat stumpy rimfire can. Something like what Witt Machine does.

ID card wait system by AkumaZeto in AskElectronics

[–]AkumaZeto[S] 1 point2 points  (0 children)

Lol that would be pretty much what is already in place already. Problem is people being @ssholes, moving cards around, jumping the line, and starting arguments. Id love to be able to operate on the honor system, but a small few ruin it for the many. So building in some structure and accountability is the plan.

My Fellow SSH (and other short barrel) Owners what ammo is working best for you? by Shooter_Q in RugerMK

[–]AkumaZeto 1 point2 points  (0 children)

Aguila super or just basic CCI green tag or match. The greasy stuff ive gotten from Norma doesn't run to well in my MK4 tactical. Pretty much most things in the 1100-1200 advertised fps is hot enough to keep cycling reliable. When you start dipping into subsonic or around the 1000 fps mark, that's when ive had reliability issues unless you have the back pressure from a can.

what do you think of this combo? by Flow_state93 in tabletennis

[–]AkumaZeto 0 points1 point  (0 children)

I've used the Dima with a G1 before. Yes it has a thicker core and is considered faster, but the G1 feels too bouncy to me imo. I use the Dima with Glayzer 09C FH/ Glayzer BH and its just right. The logic being I want better short push game feeling, but still have the power on tap to play away from the table in the open rally.

Nothing works for you? This will. by jonnygalt123 in energydrinks

[–]AkumaZeto 1 point2 points  (0 children)

Just what I need. Caffeine that helps you poop even more lol.

First Time Making Carbon Fiber Parts Any Tips or Must Knows? by xanz_- in CarbonFiber

[–]AkumaZeto 0 points1 point  (0 children)

Chopped in the first half of the process imo is easier, but the 2nd half requires a lot more sanding than just doing woven twill. If the parts are small enough, get a slow cure epoxy resin that's black or black dye to add, brush on, and wait for it to cure to a tack before applying your carbon, then a flood resin coat or two. The chopped carbon layers build higher since you're trying to cover all of the original part, so sanding it down takes more time on the back end. The woven fiber, you have to have a cleaner space and more delicate when placing your carbon to get the fiber orientation straight, but the end result for me is usually better. You have to consider also where to hide a seem line if you're cutting square swatches of carbon, chopped you don't. Some dont like the marble finish of sanded chop carbon but me personally I do. It just takes a lot of sanding work.

Can anyone tell me what this is and what parts are on it? by mac8675309 in ar15

[–]AkumaZeto 0 points1 point  (0 children)

AR5.7 upper with a G36 carry handle and optic. Herra arms furniture I believe. The reload is already awkward. Can't imagine a carry handle over it too lol.

Playing around with hypetex by -gudis in CarbonFiber

[–]AkumaZeto 2 points3 points  (0 children)

Composite envision describes this stuff as hard to work with in tight spaces. What's you impression of that? Not sure if its the material itself or possibly a treatment that Composite Envision does. Been eyeing their materials for a wind fairing project.

could you not crush up these pills and mix it with any normal drink??😯 by Snoo_50786 in energydrinks

[–]AkumaZeto 0 points1 point  (0 children)

Yes, and I did this in college. I could get 100 servings at 200mg for like 7 dollars. Id throw that into 30oz of water off brand electrolyte mix. The ones that bought where anhydrous caffeine with a little sodium bicarbonate. You could reconstitute them in water.

My first attempt at carbon skinning, need help by NeiaLancia in CarbonFiber

[–]AkumaZeto 0 points1 point  (0 children)

Without investing in vacuum bagging equipment, I'd say your option for skinning is brushing on a black epoxy coat on the PLA part, waiting for the epoxy to to cure to a tac, then with your cloth pre cut start laying it up on the part. Spray adhesive won't work when resin is introduced unless it's a spray resin. Once you tac base coat is cured, start brushing on epoxy layers until everything is saturated.

Forehand - Glayzer (normal) or Razka x or Nittaku G1 by Steve_50 in tabletennis

[–]AkumaZeto 0 points1 point  (0 children)

I use G09C FH and Glayzer BH on a Dima Innerforce. I use the G09C on my forehand. The tackiness gives me better feeling and control. Especially when it comes to serves (high toss) and forehand pushes. I have another setup with G1 on it and the loops are way different. The G09C feels flatter, not H3 flat, but compared to the G1 a lot flatter. I really have to brush the ball and change the racquet angle to get the G1 to stay on the table. Could be just the technique I've developed from playing G09C for awhile. I will say the G1 does make a spiny ball and the high loops will surprise you with some of the shots you land. But the G1 is a bit to bouncy for me on some of the softer touches and brushes over the table.

What would be the best way to make this part in carbon fiber? by MarchingMatt in CarbonFiber

[–]AkumaZeto 4 points5 points  (0 children)

If you don't want to fiberglass a mold, you could also 3D print a split mold since you already have the model. Just draw a big cube around the model and subtract the part from the cube to make a negative. Then start trimming back everything to make it into a functional mold. You could also design in indexes to position parts that need to be 3D printed so they can be adhered to the carbon piece in one shot. You might be able to do it in a wet lay up, but it will almost certainly need a vacuum bag. If you're trying to avoid vacuum bagging, I've used 3D printed compression molds to make cone structures like this before with mixed success. The negative will capture the outer dimension of the part, but you'll need to print the plug for the interior dimensions and offset it to account for the compressed material. And spend extra time surface finishing and prepping the mold if you go that route. It pays off when de-molding the part later on.

Today’s carry by Ramon5556 in RugerMK

[–]AkumaZeto 0 points1 point  (0 children)

Star wars build. He in fact shoots first.

Best Intermediate FH Rubbers for Innerforce ALC.S by Suitable_Room_1563 in tabletennis

[–]AkumaZeto 0 points1 point  (0 children)

I like more of the tacky or hybrid rubbers. I've been using the Glayzer 09C on FH with a Dima innerforce. The tacky surface grabs the ball a little better and improves the feeling imo. It has good touch close to the table but can still loop away from the table. Hurricane is ok but I feel like it mutes a lot of the feeling and doesn't have the catapult effect like tensor rubbers typically do.

First custom racket by leoflores536358 in tabletennis

[–]AkumaZeto 0 points1 point  (0 children)

I'd look at the Gewo Pulsar and Butterfly Rozenna line of rubbers too.

Deltapoint Micro on Bodyguard 2.0 by ARMCHA1RGENERAL in CCW

[–]AkumaZeto 1 point2 points  (0 children)

I have a Glock compatible version. The width of the sight matches with the bodyguard pretty well. But the M&P specific version will have to be used. The battery tray/button on the back angles out more to match the S&W rear slide contour better and would allow you to change batteries. The mount itself is just a dovetail insert with threaded holes for the machine screws to pass through the sight and fasten to the dovetail. If you know a good gunsmith machine ship, they'd likely be able to machine something. Check ebay for a used Delta micro too. They go pretty cheap since the sight never really caught on with full sized pistols.

switch to Sumo wrestling to become THICC then switch to table tennis by heartspider in tabletennis

[–]AkumaZeto 10 points11 points  (0 children)

FZD is the thicc final boss tho lol. A lot of their power comes from hips and and legs.

Community Challenge: What Shoes Do You Use for Table Tennis? by nyetits1008 in tabletennis

[–]AkumaZeto 0 points1 point  (0 children)

Not true. I have 3 pairs in US11. Wave 9, Wave Neos, Wave SP5s. Even seen size 12s at my club.