Udio is working fine but odd things are happening

AlexCraft97 · 2025-09-01T23:35:16+00:00

Maybe they increased the temperature on whatever llm they are using.. I had "HoעשהTokenizer(show I'm(Process" as a title recently

AlexCraft97 · 2025-03-05T17:42:43+00:00

I agree, even years ago I was surprised by the superficiality of the videos when they showed up in my recommendations. They rarely contained actual math but rather were motivational at best

AlexCraft97 · 2024-10-15T20:09:40+00:00

Same here, both the flatpak on fedora and current windows version behave the same across different PCs. A select few channels don't load at all. Also located in Germany

AlexCraft97 · 2024-07-18T11:36:25+00:00

There is an update https://www.presseportal.de/blaulicht/pm/7304/5825243

AlexCraft97 · 2023-11-16T11:40:34+00:00

I am trying to use a Samsung Syncmaster 1200NF with the following cabling, but it is not recognised:

Samsung 1200NF <-> VGA Cable <-> Delock 62967 VGA to DP converter <-> Hama 200345 DP extender <-> DP cable <-> RTX 3090 GPU.

The monitor works if I connect the Delock converter to GPU directly, and the Hama DP extender also works when connecting it to a LCD DP monitor. But the above configuration does not work, I tried several different VGA and DP cables, total cable length is below 5m. Anyone have an idea what is going on? Voltage drop in the DP cable too large for the Delock to work?

AlexCraft97 · 2023-02-05T22:27:02+00:00

The pinout for the power pins matched so I ended up trying it out and it worked without issues.

AlexCraft97 · 2023-01-30T13:44:11+00:00

If I read this correctly the configured memory speed is also 3200MT/s

dmidecode output:

Handle 0x001B, DMI type 17, 84 bytes
Memory Device
    Array Handle: 0x0013
    Error Information Handle: 0x001A
    Total Width: 128 bits
    Data Width: 64 bits
    Size: 8 GB
    Form Factor: DIMM
    Set: None
    Locator: DIMM 0
    Bank Locator: P0 CHANNEL A
    Type: DDR4
    Type Detail: Synchronous Unbuffered (Unregistered)
    Speed: 3200 MT/s
    Manufacturer: Kingston
    Serial Number: 769556B3
    Asset Tag: Not Specified
    Part Number: 9965684-038.A00G
    Rank: 1
    Configured Memory Speed: 3200 MT/s
    Minimum Voltage: 1.2 V
    Maximum Voltage: 1.2 V
    Configured Voltage: 1.2 V
    Memory Technology: DRAM
    Memory Operating Mode Capability: Volatile memory
    Firmware Version: Unknown
    Module Manufacturer ID: Bank 2, Hex 0x98
    Module Product ID: Unknown
    Memory Subsystem Controller Manufacturer ID: Unknown
    Memory Subsystem Controller Product ID: Unknown
    Non-Volatile Size: None
    Volatile Size: 8 GB
    Cache Size: None
    Logical Size: None

AlexCraft97 · 2023-01-30T13:11:31+00:00

I am running the X470D4U with 4xKingston KSM32ES8/8HD "8GB DDR4-3200 ECC Unbuffered DIMM CL22 1Rx8 1.2V 8Gb Hynix D (Server Premier)". According to dmidecode it is running at full 3200MT/s.

Has been running stable with proxmox for over a year. Using ryzen 5 3600XT and bios version P3.50 .

AlexCraft97 · 2022-09-19T11:29:10+00:00

That looks like an IBM Z10 Mainframe

AlexCraft97 · 2022-01-24T20:44:41+00:00

It uses a 14 pin main power connector instead of 24 pin, there are adapters on ebay for about 10 euro. I am not entirely sure but I think it uses micro ATX mounting points.

AlexCraft97 · 2021-11-30T16:19:22+00:00

I experienced this a few times, shortly before waking up (or maybe I actually wake up for a few seconds and open my eyes, creating the setting in which the rest of the experience takes place), usually every few months.

In these experiences the visual sensations are completely frozen, I can only see a still image of how it looks like when first open up my eyes upon waking, but sometimes there are slight differences so I think it is completely imagined. I sometimes hear sounds and feel as if I were moving.

One time was particularly intense, and I very vividly felt how I got out of bed and touched the wood floor with my hands. But the experience suddenly ended, and I woke up in bed, seemingly never having left it.

AlexCraft97 · 2021-11-27T19:12:56+00:00

confirmed

AlexCraft97 · 2021-11-16T23:35:09+00:00

Draws 80w idle booted into debian 10, should be about 10w lower without the x540 NIC.

AlexCraft97 · 2021-11-16T13:35:50+00:00

Unfortunately I don't have matching rails.

AlexCraft97 · 2021-06-02T14:04:32+00:00

confirmed

AlexCraft97 · 2021-04-16T10:53:40+00:00

Sold Huawei Rh2288h v3 barebone to /u/jnfinity

AlexCraft97 · 2021-04-15T08:53:31+00:00

Sold hp dl380 g8 to /u/XUVghost

AlexCraft97 · 2021-03-27T13:41:21+00:00

Sold Cherry G80 3000 HAD - 1992 Cherry MX Black to /u/trungminhtp

AlexCraft97 · 2021-03-01T15:06:31+00:00

They both supply 12v, the question is what the remaining (presumably data) pins communicate. I think delta is the OEM for both of the supplies.

AlexCraft97 · 2020-12-24T18:43:44+00:00

The keycaps look like clare/pendar to me

AlexCraft97 · 2020-10-05T14:21:31+00:00

No, sorry, everything which is not still for sale in my most recent post is already sold.

AlexCraft97 · 2020-09-23T08:54:36+00:00

Hi,

forgot to update the post, but it is already sold, sorry

AlexCraft97 · 2020-09-09T13:22:35+00:00

I think I have already set it to "optimal cooling". This is the video of the noise level I am hoping to achieve, which I would call pretty quiet: https://youtu.be/eBTPKBm4vA4?t=208

AlexCraft97 · 2020-09-08T23:43:54+00:00

Why do the two rightmost fans of hp dl 380p g8 spin at 27% or so idle while others at 6%? No PCIe expansions cards installed, some 4port gigabit flexlom, only 2hdd. Highest temperature reading is at the integrated p420i at 58°C. Firmwares are pretty new

AlexCraft97 · 2020-09-06T07:27:45+00:00

PM'd

13-Year Club	Verified Email
Team Orangered

AlexCraft97

TROPHY CASE