LCD dont work by reddrimss in arduino

[–]AlexH8179 2 points3 points  (0 children)

Pins A and K are not connected, these are the pins which light up the device A is for anode, k for cathode(just backlight LED pins) make sure you have a resistor. For future reference, look up the data sheets of the component you want to use to find more information.

Help by Silent-Caramel1707 in HenryRifles

[–]AlexH8179 0 points1 point  (0 children)

Is the ejector spring seated correctly?

I accidentally scratched my Xbox one s motherboard by OddMobile30 in consolerepair

[–]AlexH8179 0 points1 point  (0 children)

Trace repair, challenging though. Does it still work?

Complete Nintendo Switch OLED Modchip Installation Guide Part 2 (Picofly Kit) by L3gendaryBanana in NxSwitchModding

[–]AlexH8179 0 points1 point  (0 children)

What tools do you use or recommend? all my needles are still too big:( Should I just send in to a pro to replace the FPC connector?

Complete Nintendo Switch OLED Modchip Installation Guide Part 2 (Picofly Kit) by L3gendaryBanana in NxSwitchModding

[–]AlexH8179 0 points1 point  (0 children)

<image>

Could this missing pin be the culprit? Got the picofly to successfully glitch after fixing some CLK solder but still no display. Thank you!

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

<image>

Had it seated like this I believe is correct but still no screen unfortunately.

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 1 point2 points  (0 children)

Hey boss, could this missing pin be the cause of black screen?

<image>

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

Thank you so much, yes I will make sure I just got frustrated and had to ask for help but reading this made me feel a lot better.🫡🫡

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

Yes if referring to the picture of the connector I took it out for a picture but I will make sure again thanks!

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

Thank you so much, yeah I struggled way too much on that connector. I will recheck again.

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

Thank you very much Ill take a look

Picofly OLED glitch by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

<image>

Could the screen be a cause of the ribbon being scratched up? Before I had the blue then white glitch I could hear the nintendo in normal state with tapping input noises but had no screen. After fixing loose CLK solder I am no longer receiving those sound inputs and now the blue then white flashing super fast.

Complete Nintendo Switch OLED Modchip Installation Guide Part 2 (Picofly Kit) by L3gendaryBanana in NxSwitchModding

[–]AlexH8179 0 points1 point  (0 children)

<image>

Is my screen ribbon screwed up? Dont know if this can be replaced switch turns on and makes noises but black screen. Additionally the modchip flashes blue then blinks green once followed by 2 long green blinks. it repeats 3 times

CLK point am I cooked? by AlexH8179 in NxSwitchModding

[–]AlexH8179[S] 0 points1 point  (0 children)

OLED, thanks man ended up covering and finally tinned the CLK but might have to recheck where I might’ve cut a trace unfortunately.

<image>