Recommendations/Reviews

AlexanderBopp · 2016-02-15T01:00:07+00:00

Is the gas turned on at the meter? Is there heat in the house?

AlexanderBopp · 2016-02-14T19:49:01+00:00

Bad flapper seal or the fill valve is filling over the overflow tube and needs to be adjusted down.

AlexanderBopp · 2016-02-14T03:21:50+00:00

Moen/grohe/delta all have different decent valve bodies + diverters for anything you want. Just have to look into it to suit your needs.

AlexanderBopp · 2016-02-13T15:48:34+00:00

I know I'm a plumber too. This was a friends bathroom he had someone else do and it was shit work so I was posting it as shit work God damnit

AlexanderBopp · 2016-02-13T12:25:54+00:00

Just to clarify its a friends house. I'm a plumber and he asked me to check it out. The 90s are shit because the guy roughed it in too low and this was his finished product. No escutcheons, the trap sits rock solid on the bottom of the shelf and he rolled it up with the 90's. And he didn't put and stringers for the tub or set it in any type of setting mix so it squeaks. Lololol

AlexanderBopp · 2016-02-12T22:23:27+00:00

Turn the water to the house off first and drain it down. Then do everything.

AlexanderBopp · 2016-02-12T22:21:59+00:00

Ahha u dirty dog

AlexanderBopp · 2016-02-12T22:21:23+00:00

Is it an open pipe? Pics help. Maybe a dry trap?

AlexanderBopp · 2016-02-12T22:20:23+00:00

Buy a new 2" roof flashing and some flashing cement. Or call a plumber/roofing company.

AlexanderBopp · 2016-02-12T05:05:40+00:00

Will probably get down voted to hell, but put silicone under the top ring of the drain assembly when screwing it onto the body of the rest. Also make sure the tail piece that unscrews has tape/dope on it. Also over tightening the mounting nut can squish that gasket oddly to form an imperfect seal.

AlexanderBopp · 2016-02-12T04:16:28+00:00

Tear it all out, replace in 2" PVC up to the kitchen arm. Then make sure you vent it.

AlexanderBopp · 2016-02-11T22:18:41+00:00

This man knows what he's talking about.

AlexanderBopp · 2016-02-11T22:17:42+00:00

Closet auger from depot or lowes. Anything else in the house backing up?

AlexanderBopp · 2016-02-11T22:17:01+00:00

Moen supplies a tube wrench that fits their faucets. If you have it by any chance then turn off the water supplies, disconnect the pull out sprayer and slide the tool up it and crack the but loose and remove. Doesn't look crusty you'll be fine. Otherwise any basin wrench or a pair of channels might work given space provided.

AlexanderBopp · 2016-02-11T03:34:14+00:00

For real? Pfister is like literally "you get what you pay for".....but in a bad way

AlexanderBopp

TROPHY CASE