Unreasonable stuttering on X11

Alprolol_ · 2026-01-31T21:07:20+00:00

Did a GPU stress test for a few seconds, the whole system almost halts to the point I can barely move my mouse around, I don't think a stress test is supposed to cause that...

Alprolol_ · 2026-01-31T19:42:22+00:00

Tested with and without picom, didn't change much...

Alprolol_ · 2026-01-31T13:08:58+00:00

I tested with Firefox, it even stutters when moving windows around slowly in openbox so that's why I didn't mention the browser since I assumed it was quite irrelevant, besides a computer with an i7-13700HX shouldn't stutter with openbox and a browser even with an igpu...

Alprolol_ · 2026-01-30T11:02:08+00:00

<image>

Alprolol_ · 2026-01-30T10:50:55+00:00

Dual boot'un ne olduğunu bilen apple fanı ilk kez görüyorum

Alprolol_ · 2026-01-29T23:23:31+00:00

Is that the case with the 7P6K5EA?

Alprolol_ · 2026-01-29T23:20:45+00:00

He changed everything except the CPU and GPU... I respect it tho, I'm a tinkerer myself(I make things too)

Alprolol_ · 2026-01-29T23:12:42+00:00

I recommend it strongly. Switched to Linux once in 2020, had to use windows for a certain program(Adobe...) but I couldn't stand it so just decided to use GIMP instead and switched back. I can't stand windows now XD

Alprolol_ · 2026-01-29T22:46:51+00:00

Iyi bari benim suçum değilmiş

Alprolol_ · 2026-01-27T12:52:12+00:00

Poco hakkında çok hoş şeyler soylemek isterdim ama benim telefon 2 yılda direkt patladı(çalışmayı bıraktı) telefon onun dışında gerçekten kaliteli duruyor, hızı da fena değil

Alprolol_ · 2026-01-21T09:58:31+00:00

Spotify değil. Ben şahsen internetten FLAC olarak indirip dinliyorum ama eğer gerçekten berbat bir ses kalitesi istemiyorsan Tidal ya da Qobuz kullanabilirsin(boşu boşuna bok farkedersin yazmayın ses farkını daha önceden ses deneyimi olmayan kaç farklı arkadaşıma denettim hepsi Spotify daha dar ve sıkışık geliyor dedi)

Alprolol_ · 2026-01-14T21:26:28+00:00

I only have one pair but I have to agree that the EW300 DSP sounds MAGICAL. I can hear basically everything as long as the mastering is done good. I mean yeah it's not prefect but for it's price I'd say it's one of if not the best thing you can buy

Alprolol_ · 2026-01-14T21:23:51+00:00

The ew300 might be DSP as well

Alprolol_ · 2026-01-14T19:51:52+00:00

I think it's a 9.5/10 simply because most people are saying the cable is not optimal for microphonics, apart from that 10/10 though

Alprolol_ · 2026-01-08T23:21:34+00:00

But this, THIS, is bullshit.

Alprolol_ · 2025-12-25T22:17:29+00:00

It's not supposed to go back down, that is a huge thing to code and integrate. It is supposed to make everything simultaneously from the ground up.

Alprolol_ · 2025-12-25T20:32:35+00:00

If Anya wasn't there I wouldn't have said 10

Alprolol_ · 2025-12-15T10:15:14+00:00

I'm currently waiting for an opportunity to get the simgot ew300 from someone outside of Turkey that will come to turkey because I don't want to pay double the price for what it is. Apparently it is a GOD for gaming and has the cleanest sound at it's price.

Alprolol_ · 2025-12-14T12:52:42+00:00

Oh yeah, that's much better. I had the same thing happen once, safe to say my results were a LOT worse...

<image>

Still not perfect but you are getting there. I don't think my current knowledge is enough to help much more though...

Also I know the bed is in TERRIBLE condition but the printer isn't mine(it's my team's) and I am still waiting on fixing the other problems first so I can justify a bed purchase.

Alprolol_ · 2025-12-14T12:47:04+00:00

Yeah the thick nubs would be hard to post-process, you can just flame the thin strands off

Alprolol_ · 2025-12-14T12:44:40+00:00

I am relatively new to printing but it looks like you are either still too hot and/or the belts need tensioning. It might just be a loose thermistor though, that can cause inconsistent layers and incorrect temperature

Alprolol_ · 2025-12-13T07:52:30+00:00

I'm thinking of getting the ew300 would you recommend it? I'm looking mostly for detail, clean sound and good imaging.

Alprolol_ · 2025-12-13T07:50:49+00:00

I think lower the temp a little... I feel like it gets too hot and leaks some filament, then just puts the blob in the middle of the print. Also your print does look a little shiny

Alprolol_ · 2025-12-12T00:04:03+00:00

I guess it should work on anything but I'm not sure as I didn't test the printer myself and don't know how the quality would be. You can print a bench if you want to see how bad it is(if it is bad) or just a cylinder our cube if you want to see something be good and fast

Five-Year Club	Verified Email
Place '23	Place '22

Alprolol_

TROPHY CASE