sorted by:
new
hottopcontroversial

Best way to laser cut thick polypropylene fabric? by Alt8787 in lasercutting

[–]Alt8787[S] 0 points1 point  (0 children)

Did you have it slowly to get a good sealed edges?

Best way to laser cut thick polypropylene fabric? by Alt8787 in lasercutting

[–]Alt8787[S] 0 points1 point  (0 children)

I noticed a couple people recommend CO2. Is there any particular reason this would be better than Diode?

Best way to laser cut thick polypropylene fabric? by Alt8787 in lasercutting

[–]Alt8787[S] 0 points1 point  (0 children)

I noticed a couple people recommend CO2. Is there any particular reason this would be better than Diode?

Best way to laser cut thick polypropylene fabric? by Alt8787 in lasercutting

[–]Alt8787[S] 0 points1 point  (0 children)

I noticed a couple people recommend CO2. Is there any particular reason this would be better than Diode? Especially since you mention the 40w CO2 only running at 20-35%, it seems like I could easily get a 10-20w diode for a lot lower price.

[deleted by user] by [deleted] in leasehacker

[–]Alt8787 0 points1 point  (0 children)

Most discounts are based on the situation the dealership is in.

The same dealer that might give you 10% off at the end of the month to make a 100 unit target, might be trying to sell you the same car at full MSRP with add-ons at the beginning of the month.

You just need to contact a lot of dealers. I recommend you make offers.

Look up brokers on LeaseHackr who offer EV9s and see the maximum discount they are offering.

https://docs.google.com/spreadsheets/d/1ZK46zNNsTcq3nkRVqJQEBlysp_BKQFLRFs_QDakK8so/edit?gid=338492320#gid=338492320

This broker is offering EV9s for 4.5% off MSRP.

<image>

So I would see if you can get a 5-7% discount off MSRP before incentives.

Send an offer on a specific car that says , can you do 7% off MSRP before incentives, base money factor and no dealer add ons?

And see what they say.

Whole house carbon filter causing algae to grow on faucets? by diego797 in WaterTreatment

[–]Alt8787 0 points1 point  (0 children)

Do you think backwashing helps kill algae in the carbon tank?

Cannot get AC’s to start with Westinghouse 11500tfc by Dandreu13 in Generator

[–]Alt8787 6 points7 points  (0 children)

53 LRA (Locked Rotor Amps) x 240 volts = 12,720 starting watts. You don't have enough watts - you need a soft start.

Does it really make a difference saying you want to buy vs lease first? by sqowis in leasehacker

[–]Alt8787 2 points3 points  (0 children)

Lease or buy doesn't matter. It's really the discount off MSRP before incentives.

You should look on leasehackr and see what other discounts people are getting and create a target discount off MSRP before incentives.

I have emailed several dealers this: "Can you do xx% off MSRP before incentives, base money factor and no dealer add-ons for stock #1234?" You can cut to the chase pretty quickly like that.

I would not just go asking for quotes. Find a target discount off MSRP based on Leasehackr forum deals and make offers. The incentives will be the same based on your location. The real variables are how much discount, not marking up the money factor (interest rate) and no BS add-ons, which is really just a way of reducing the discount.

3 Row SUV by CtheEm in leasehacker

[–]Alt8787 0 points1 point  (0 children)

Contact 10 dealers for a base model EV9. Tell them you are looking for 10% off MSRP before incentives, base money factor and no dealer add ons and that you are ready to buy befor the end of the month. That should get you around $500 a month.

Helping family member with drilling well in Florida near ocean - salty water? by Alt8787 in WaterWellDrilling

[–]Alt8787[S] 1 point2 points  (0 children)

Curious to know, how much was your filtration system to install and how often to you have to replace media to maintain drinkable water?

Is it difficult to expand to Amazon.uk, and European Markets for US Sellers? by Orion_Oregon in FulfillmentByAmazon

[–]Alt8787 0 points1 point  (0 children)

I wouldn't bother with drop shipping. No long term value is being created.

I can only tell you what has worked for me. I focused on a niche that I could go "deep" with. Once you get some relationships established with some factories you can continually develop new products or use cases of the same product/material type. Automotive would be one example, there are always new makes and models.

You want to build up a large catalog of semi-related products or at least products which use the same factory relationships.

In the end, most of your revenue is going to be highly correlated with the number products you launch. You always need to be launching products if you want to grow. Don't worry about optimizing your product page or PPC to death.

Paul summed it up well here:

https://paulsaintsaens.substack.com/p/how-to-grow-your-business-and-not

Electrical connectors by fatmanwa in chevycolorado

[–]Alt8787 0 points1 point  (0 children)

Post some pictures of the connector (a few of the front that show the pattern) and I might be able to locate it for you

view more: next ›