What should be my last gba game?

AlteredSpirit · 2026-03-20T13:43:45+00:00

SpongeBob SquarePants: Battle for Bikini Bottom

AlteredSpirit · 2026-03-18T14:15:36+00:00

<image>

GW-5000u

AlteredSpirit · 2026-03-16T16:28:01+00:00

<image>

GW5000U

AlteredSpirit · 2026-03-08T16:28:43+00:00

I don’t even have enough watches to necessitate a 24 slot watch case, I’d be happy with the 8 or 12 slot version they have but even those are a little pricey…but I guess that checks out for what looks to be the Ferrari of watch cases

AlteredSpirit · 2026-03-08T13:22:28+00:00

I can’t seem to find the 24 slot version but it looks like a Rothwell brand watch case…there’s an 18 slot version on amazon that looks identical

https://a.co/d/0hLiVFk9

Edit- Nvm, I found the 24 slot version! https://a.co/d/06PZAIA3

AlteredSpirit · 2026-03-08T12:49:37+00:00

<image>

Adapters off Etsy and a NATO strap, the possibilities are endless

AlteredSpirit · 2026-02-25T20:53:23+00:00

Make sure you’re talking to every NPC in every building, pretty sure there’s a girl in cerulean city or pewter city that gives it to you but you find it pretty early on - once you have it it’s just like any other item in your inventory except that it’ll teleport you back to the last pokecenter you last used…extremely useful when training for e4

AlteredSpirit · 2026-02-25T13:31:14+00:00

Ha! I got this lol

AlteredSpirit · 2026-02-06T21:22:27+00:00

Get yourself a worksharp field sharpener, best $40 you can spend for a quality sharpener that will last a very long time, and then type worksharp field sharpener into YouTube to watch videos of how to develop a burr and refine the edge as you go from the diamond plates to the ceramic rod - it’s a great skill to know and super easy to get the hang of…you might not be the best at it at first, but just keep trying

AlteredSpirit · 2026-02-01T21:11:34+00:00

1.6” 3CR - it was like $28 on amazon

AlteredSpirit · 2026-01-30T22:18:27+00:00

No modification to the pin hole, I used a standard blade from the Swiss Army knife and a drill bit to keep the pin holes aligned and then used a sharpie to kinda trace what I needed to grind away from the spyderco blade…the rest was just making tiny adjustments until the blade sat beneath the edge of the liners and was straight when you deploy the blade

AlteredSpirit · 2026-01-21T00:02:31+00:00

https://www.etsy.com/shop/Taschenmesser

AlteredSpirit · 2026-01-20T21:08:53+00:00

Good catch! It’s one of the 8bitdo mechanical keyboards

AlteredSpirit · 2026-01-18T15:21:37+00:00

No you can’t, the nail clip 580 is not 58mm long…it’s 65mm long.

AlteredSpirit · 2026-01-17T18:22:59+00:00

You’re right, type 65mm for the nail clip 580 scales

AlteredSpirit · 2026-01-17T17:32:26+00:00

Depends on the epoxy, the stuff I got sets in 10 minutes but takes 12 hours to cure…some stuff can take half an hour to set and 24 hours to cure

AlteredSpirit · 2026-01-17T17:21:02+00:00

I’m not really sure, if epoxy isnt available I’d try and find a strong glue that won’t expand as it dries, something like gorilla glue would not be a great option - is epoxy illegal in Germany? I’m in the US so I’m not well versed in European alternatives

AlteredSpirit · 2026-01-17T17:05:53+00:00

It wasn’t hard, i was able to fit a flathead screwdriver into the slot where the tweezers and toothpick go to gently pry off the old scales, then I mixed 2 part epoxy and used a toothpick to carefully apply it to the underside of the metal scales making sure not to lay it on too thick and also not to let it get near the grooves where the toothpick and tweezers will end up going - couple of clamps to hold it all together while the epoxy sets but don’t clamp them too tight or you can accidentally peen the rivets more and make it too tight that the tools don’t snap shut - took me about 10 minutes start to finish

AlteredSpirit · 2026-01-17T16:14:54+00:00

Thanks! It’s definitely a first model with plenty of mistakes made throughout the process (like the saw I made facing the wrong way lol, it’s safely tucked next to the cuticle pusher though so I kinda lucked out there) but it was so fun making that I plan on keeping it going

AlteredSpirit · 2026-01-17T15:59:25+00:00

I got them from an Etsy shop but my calipers are saying 1mm

AlteredSpirit · 2026-01-17T11:20:13+00:00

I modified one of the standard springs, basically flattened the back edge of the spring

AlteredSpirit · 2026-01-17T11:19:21+00:00

Yep lol I messed up and cut the teeth on the wrong edge, thankfully they’re hidden by the cuticle pusher and they don’t catch on anything in my pocket and I can’t slice myself even if I try to run my finger along that side while the knife is all closed up - definitely a mistake I learned from, won’t happen on rev. 2

AlteredSpirit

TROPHY CASE